Beautiful crochet blouse pattern. Crochet patterns for sweaters, jackets, coats. Asian top from Japanese magazines with round yoke
Adorable soft blouse with chain sleeves
A lovely soft blouse with chain sleeves and trim stripes along the hem and neckline. It is not difficult to implement, but it will require accuracy and patience both in calculations and in implementation.
Consists of 2 parts - front and back, which are knitted from bottom to top. There are chest darts on the shelves. The design strip along the neckline is made directly on the finished product (tied), and along the bottom it is knitted separately, after which it is sewn. The sleeve is made from the side seam, according to the required volume of the arm.
For work you will need: size 46-48 approx. 700 g pink iris; hook No. 2.
First of all, you need to make your pattern in full size and mark on it the chest dart, the width of the future border along the bottom and along the neckline.
At the middle of the front, the neckline will be filled with a finishing strip to a height of 7-8 cm, on the shoulders by 3-4 cm, with a transition to the same width on the back (see pattern). Having knitted a test sample, calculate the loops and start working from the bottom of the back with the main pattern according to pattern No. 1, repeating it from the 1st to the 6th row. Having knitted 23 cm from the initial row, make decreases for the armholes. After 22 cm, close the central loops of the neck, divide the knitting in two and then knit each half separately. At the same time, continuing to make decreases in the neckline and bevels for the shoulder line. After 45 cm from the starting row, finish the work, leaving approx. 4 cm for finishing strip.
Start knitting the front in the same way. To make a dart, use a stretched thread from half-column to half-column of the next row. If your bust size allows, you can do without a dart.
Assembly. Steam the finished parts through damp layers of fabric, connect the shoulder and side seams. Then start knitting the border for the bottom. It is knitted in the transverse direction according to pattern No. 2, a length equal to the width of the blouse at the bottom + 2 cm for the fit. Close the finished strip into a circle and sew it to the bottom edge of the blouse, adjusting the frequency of stitches with the loops of the initial chain.
For the sleeve, cast on a starting chain equal in length to the distance from the armpit to the desired length. Next, knit in the transverse direction according to pattern No. 3. When performing okata, gradually increase the length of the pattern chains (chain loops) and the number of double crochets, gradually introducing them into the pattern.
On the pattern, identify areas with different numbers of chain stitches along the neckline. Start tying the neck line from the shoulder line according to pattern No. 4 from the first row of single crochets. Then, starting from the second row, make a smooth transition from
7 air loops along the shoulder line to 22 in the center of the front and again smoothly moving to 7 air. loops going to the back. Knit rows 3 and 4 according to the pattern.
Crochet openwork blouse- an indispensable product in the summer wardrobe. Such a thing can improve the image of a fashionable, modern girl; it can be worn with skirts, shorts and trousers. And don’t think that only older women love knitted summer blouses; girls who adhere to popular clothing are increasingly coming to this style. boho style. It is important to choose the right pattern for a knitted item and thin, good threads. Such a blouse can even be found in the house of Princess Kate Middleton, whose exquisite taste is appreciated by everyone.
Summer items can come in different colors, but the basic item for almost any wardrobe is a white blouse. Therefore, for beginners it is very important to find a simple pattern for a white summer openwork blouse. And for advanced craftswomen, complex drawings are not a hindrance. Practical knitting will help you create a pair - a blouse and a jacket. Well, in fact, diagrams and descriptions for them, as well as photos of models and useful videos, are provided on our website completely free of charge.
You can easily choose openwork sweaters for yourself, and the patterns can be individual motifs, which are then sewn into one product, or there can be products that are created in a circle, starting from the throat. The item can be made with long or short sleeves, 3/4 sleeves or flounce sleeves, which make the look cute and feminine. The blouse can be made with buttons, or it can be made with a wrap that will be tied to a thin silk belt. In a word, your imagination has room to roam, so you can move on to choosing a specific model and schemes.
In your summer style, the most important thing is not to overdo it with knitted things, you should achieve the right combination of knitting and textiles, so if you have already worn a knitted skirt for a walk, then you need to take a wonderful cotton shirt or T-shirt with it, but a summer openwork sweater is great will be combined with light things.
Young girls in their own style can combine knitted blouses with long sleeves and T-shirts with denim skirts and shorts, complementing the look with leather shoes and colorful bracelets.
Materials for work.
- Alize Forever yarn (with a density of 300 meters / 150 grams) - 400-600 grams.
- Hook No. 2.5.
- Plastic markers for knitting (pins).
Job description
You need to choose very thin threads for knitting, but do not forget that if you take too thin yarn, the openwork part of the product will look too revealing. Perhaps, before moving on to calculations and main knitting, it is worth making a control sample according to a certain openwork pattern. The number of skeins will depend on the size of the item, but if you took a “rare” brand or create an order via the Internet, it is better to always buy yarn with a reserve, otherwise your item may remain unfinished. Of course, the color scheme of the yarn will completely depend on your desires, because it is important that a fashionable hand-knitted product fits into your wardrobe.
Crochet openwork blouses: patterns
The best women's openwork crochet sweater will turn out from motives: first, we should knit the motif blanks according to the pattern, which are then attached together with a mesh. The mesh pattern elegantly includes multi-petal “Flower” motifs, which are evenly positioned on the canvas. Remember that depending on the choice of colors of the yarn, you may end up with an elaborate, colorful thing or a delicate, light one if you take a snow-white or beige thread.
There is one more serious rule - Not all girls are suitable for knitted clothes, especially light, mesh ones, for example, overweight women should refrain from such outfits, but thin, slender girls with sizes 36-40 definitely need to try the shown pattern.
Materials for work.
- Viscose yarn (174 meters / 50 grams) - 400 grams
- Hook No. 2.5
- A needle with a large eye for working with details.
You can take and natural cotton thread, great for summer clothes bamboo, A viscose can be translated into a versatile yarn that makes interesting summer whites.
In our case, there is no need to knit a control sample to determine the knitting density, but we need to create one floral motif, which is considered the main detail of our item. A flower knitted according to the presented pattern will look like a square with a side of 7.5 cm
To make an even crocheted openwork blouse, you can watch videos and master classes on the Internet before work. Having learned how to create motifs, you will not have problems with assembling the finished product.
You can take any other motif that you find very cute for the sweater that you will wear in the summer. And for winter, you can learn cardigan knitting to complete your winter wardrobe. In fact, knitting sweaters and blouses is quite easy, the main work is creating the sleeves, but if you read the instructions, you will succeed.
Crochet sweater pattern
A do-it-yourself crocheted sweater is always original. There will definitely not be a second one like this. The models are openwork, delicate and very feminine. You can crochet not only women’s blouses; it can also be used to create elements of children’s and men’s wardrobes. Let's look at some of them.
Crochet tunic for overweight ladies on one shoulder
Women with curvy figures usually find it difficult to find suitable clothes in the store. Either the color is wrong or it doesn’t fit well. The ideal option is to knit the clothes yourself. Overflights are excluded. This tunic model is made from motifs in two colors. Can be worn on one shoulder.
Description
For size 50-52 we need to prepare: 200 g each of cotton yarn “Iris” in blue and blue colors, hook No. 2.5
We start knitting a tunic for overweight ladies with a hexagon motif. We dial a chain of 10 v. p. blue color, close it into a ring and then knit it in a circle as the diagram shows.
There should be 19 hexagons.
Now let's move on to the pentahedrons. We need 3 of them. We dial a chain of 10 v. p. blue, close it in a circle and knit according to this pattern
Assembling motifs into a single piece for obese women is done according to the drawing
The tunic is tied according to the following scheme:
The product is ready. As it turns out, knitting a tunic is not at all difficult, which is quite suitable for beginners.
Women's cardigan jacket: video master class
Elegant jackets for obese women
The jackets are designed in a strict classic style. They are devoid of pretentiousness and excesses. Jackets of this model are suitable for women of any age.
Description
The number of loops of this product is calculated for the following measurements: OG 120 cm, product length 64 cm, internal sleeve length 47 cm.
To knit jackets for plus size ladies you need to prepare: 500-600 g of beige Novita Bambu yarn (which contains 68% bamboo, 32% cotton), as well as hook number 3, 8 buttons.
Before we start knitting jackets, we need to make a pattern for each part according to our measurements. We start knitting from the back. We collect a chain of 172 vp. and continue knitting with the main pattern according to cx 1.
At a height of 39 cm, decrease 1.5 repeats on both sides and continue knitting along cx 2. We check all decreases and additions of the part with the pattern.
At an armhole height of 25 cm, perform the 8th row of the pattern and cut the thread. We perform the other side in the same way, but we do not cut the thread, but knit the 8th row of the pattern along the entire edge of the part (first one shoulder, and then the other).
Please note that the pattern diagram shows 4 values for the same segment; they correspond to different clothing sizes. We are interested in the largest values, because jackets are intended for overweight ladies.
To knit the left front, cast on 84 stitches. p. and knit with the main pattern. We make decreases according to cx. 2. At an armhole height of 25 cm, perform the 8th row of the pattern and cut the thread. The front edge of the part is tied with the main pattern, rows 1-3. Make the right shelf symmetrically.
For the sleeve we dial 76 in. p. and knit, as diagram 3 shows
We make decreases according to cx. 2 and pattern
We assemble all the parts into the finished product. Art. s n. tie the collar and tie the edges of the jacket, leaving holes for the buttons.
Crocheted raglan for children
This raglan for children is suitable for the age of 3 months. Knitting is simple and perfect for beginners.
To knit a raglan for children you need to prepare: 100 g of blue yarn of medium thickness, which contains 40% wool, 60% acrylic; a little white, blue, black yarn (for applique), 4 blue buttons and 1 black bead.
Description
We start knitting raglan for children from the back. We dial 37 v. p. and knit 3 cm with an elastic band according to the drawing in diagram 1.
Then we continue knitting according to cx. 2.
We perform the front in the same way as the back, following the diagrams.
To knit sleeves, raise 27 stitches along the edges of the armholes and place the front shoulder strap on the back shoulder strap. We continue to knit raglan for children according to cx. 2.
Trim the neck according to cx. 1. Using a white thread, tie the edges of the front, neckline and shoulder straps in this way: *1 dc in the loop, skip 1 stitch, repeat from *.
According to diagram 3, make an applique and decorate the raglan for children with it.
Knitted children's jacket with raglan ears: video mk
Stylish women's sweaters with a round yoke for beginners
A white jacket with a round yoke and pineapples will always highlight the advantages of your figure, and a patterned border will add tenderness to the look.
Size of sweater with round yoke and pineapples 44-46
We will need: white viscose yarn, hook No. 1.5
Description
We start knitting from the neck. We dial the number of loops so that 12 motifs fit.
Next we knit according to diagram 1, after which we collect 24 arches for the yoke and close them into a ring. Then we continue knitting in the round along cx1a. At a height of approximately 19 cm, we divide the product into 3 parts (front, back, sleeves) so that each of them gets 3 motifs. We continue to knit the front and back in the round according to cx. 1st century We perform sleeves according to diagram 1b, and decreases and increases according to diagram. 1 year The border of the lower edge of the sleeves is made according to cx. 1c
The white jacket with pineapples is ready. Its simple knitting pattern is suitable for beginners.
Women's blouse made of square motifs for beginners
Schemes and descriptions of a sweater made from square motifs are given for clothing sizes 44-46, 48-50.
For work we need to prepare: olive and light green yarn 150g each (composition: 55% cotton, 25% polyamide, 20% silk), hook No. 3.5 (4.5).
To knit square light green motifs, we cast on a chain of 6 vp, close it into a ring and knit according to the pattern. The edge is tied with olive thread.
There should be 46 square motifs. They must be placed on a flat surface according to the pattern and tied together.
The jacket made from square motifs is ready.
Crochet openwork blouse: video mk for beginners
Unusual summer crochet top on one shoulder
This original women's jacket is suitable for everyday wear and for parties. It is easy to make, so it is suitable for beginner needlewomen.
Product size – S
For work we need: white microfiber yarn 250g, hook number 2.
We begin work by making patterns. We will then consult them during knitting.
For the back we dial 90 vp. and knit according to the pattern to a height of 45 cm. Then we retreat 12 cm on one side, and on the other, leave 5 cm for the armhole. We continue to knit one shoulder, making the appropriate decreases. Finish the work at a height of 17 cm.
The front of the product is done in the same way.
For the sleeve, we cast on a chain of 24 vp, close it and knit in circular rows of 44 cm, as the diagram shows.
To give the blouse a more elegant look, its edges can be tied with shiny thread. An openwork trim or border will add tenderness and charm to the product.
Lovely sweaters and blouses from Japanese magazines
On the Internet it is extremely rare to find a translation of the description into Russian. Perhaps because the Japanese provide many detailed diagrams for their products, and everything is clear without description.
A charming white blouse that can be worn on one shoulder
Blouse with yoke from Japanese magazines
To knit such a blouse with a yoke needs to be prepared approximately 300g cotton yarn. The border is made separately and then sewn on.
Asian top from Japanese magazines with round yoke
It is best to knit a sweater from Alpaca Baby Lux yarn in 2 threads. ¾ sleeves and a frill trim add elegance to the product.
Openwork blouse from Japanese magazines
Two types of border decorate this product. The piping is done along the bottom, neck, front and sleeves.
Women's blouse from Japanese magazines
The blouse is made of square motifs. There are half-motifs as curves on the sides. The bottom of the product is decorated with a border. The neckline is tied with a braid through which a string is passed
Delicate blouse from Japanese magazines
The product is made of snow-white yarn. Its bottom and shelves are decorated with floral trim.
Baby surprise jacket: video master class
Men's crocheted sweater
You can crochet not only women’s or children’s clothing; it can also be used to create men’s wardrobe items.
Handicraftsmen who know how to crochet open up almost endless creative possibilities. This simple tool allows you to create truly amazing things. The openwork crochet pattern is suitable for all types of knitting clothes, as well as for giving it a finished look. We invite you to familiarize yourself with a large selection of pattern patterns that will be ideal for a certain type of knitted item.
The emergence of knitting
Crocheting originated quite recently. Its strengthening and development was facilitated by the industrial revolution, which helped make creative material accessible to the public. The natural fibers used by our ancestors were quite difficult to obtain and process. With the advent of mechanisms for cleaning cotton and spinning thread, the process accelerated significantly and expensive threads became cheaper. Now they were no longer the privilege of rich ladies; even peasant women could use yarn.
Lace was extremely popular. The finest openwork, created by the caring hands of craftswomen, was very expensive. This allowed the poor to unite in artels and produce lace for income. During the famine in Ireland, needlewomen invented a new type of lace, which was called Irish. It consists of tiny parts that are combined in various ways into a single canvas of incredible beauty. A great variety of different motif schemes have been developed for this technique.
Nowadays crochet is very popular. Even schoolchildren can master this simple instrument. The main thing is to have a little patience and everything will work out! Even fashion designers do not shy away from delicate handwork. Every year their collections are replenished with new knitted models, as in the photo below.
Features of patterns
Even if you don't fully master the art of knitting, you can create incredible patterns using ordinary stitches and stitches. All patterns are conditionally divided:
- Embossed;
- Openwork.
Embossed ones are a dense canvas with a massive ornament. Openwork translated from French means “through, translucent.” This means that the openwork fabric must have through holes. They are used for knitting both light summer and winter items. Even dense yarn can create an openwork fabric.
To make winter clothes, they use threads from mohair, wool, and angora. It is advisable that they be combined with artificial fibers such as acrylic or polyamide. This proximity will make the result of the work strong and durable, and will help calm the “prickly temper” of the wool.
When creating summer openwork, preference is given to natural cotton, linen, viscose, and silk. They will give the product lightness and tenderness, will be pleasant to the body and will not cause allergies.
Create a sample
Before starting work on a product, even experienced craftsmen try to knit small samples. They will help:
- “Get your hand” in executing the pattern;
- View the properties of the selected yarn and determine its compatibility with the pattern;
- Calculate the knitting density.
We invite you to familiarize yourself with the popular peacock tail pattern.
The rapport is 19 loops. Knitting is done according to the following pattern.
The diagram shows 38 air loops of the initial chain. Pick them up using a crochet hook. Don't forget that the size of the hook and the thickness of the yarn must match each other. Add three lifting air loops. In the fifth loop from the hook, work 4 double crochets. Work one double crochet into the sixth loop. The next 8 stitches are knitted through one loop. A bunch of 5 double crochets is again knitted into the next loop. The rapport is over, now you need to repeat exactly the same sequence to the end of the row. Please note that at the beginning of the row, the selected lifting loops replaced your double crochet. When performing the second repeat, the first bunch should consist of 5 columns, not 4. The first row is finished, and the fabric has acquired a wave-like shape.
In the second row you need to go up one loop and knit a single crochet over each stitch of the previous row. You also need to knit all even rows. The third row is performed according to the description of the first row. In the fifth row, make 5 instep stitches (they will replace the first double crochet stitch), add a chain stitch and knit a bunch of 3 triple crochet stitches separated by a chain stitch into the last stitch of the third row. Skip two stitches and work a double crochet stitch into the third stitch. Repeat 4 times. Skip 2 more loops and make a bun of 5 double crochets separated by chain loops. Knit a second repeat. Complete the even row with single crochets.
Vertical repeat consists of the 6 rows you just knitted. To continue knitting the fabric, you need to repeat vertical repeats until the desired length of the product is achieved. You can use this openwork for a stole or scarf.
Due to the characteristic shape of the canvas, this pattern is also called “waves”. If the description raises questions for you, we recommend that you watch a video that clearly shows the knitting process.
Patterns for beginners
Even beginners can create simple openwork patterns; although they are easy to do, they give the canvas a neat and beautiful look. The following patterns are suitable for beginner needlewomen.
Grids and cells.
Such fabrics can be used for knitting summer tops or for tunics.
Diamonds, squares.
They are perfect for a summer blouse or dress, as well as for winter items - shawls, sweaters, cardigans.
Fans, waves, zigzags. They relate to the “peacock tail” pattern, which we examined in detail.
They will be an excellent background for both a large blanket or snood, and for a little princess’ dress.
For experienced knitters
For those who have mastered the art of crocheting to perfection, we can recommend the following openwork patterns:
Christmas trees and waves.
Used for finishing summer items.
Floral patterns.
Try to give yourself a gift and crochet an openwork sweater made from motifs. This is an interesting technique for everyone, which will help you understand the circuit and study it thoroughly. It is suitable for any figure, because the pattern perfectly hides all the imperfections of the figure.
Let's get started
For work you will need: mercerized cotton yarn 50 g per 240 m - only 350 g, as well as hook number 2.
During the creation process we will make hexagonal motifs.
Let's get to the product.
The basic rule is that the diameter of the pattern is 18-19 cm. We will start all the work from the bottom. First you need to make 10 motives, working according to scheme 5.1. There will be six petals that need to be gradually connected into a ring; the picture shows with arrows where and how to do this. This blouse is suitable for women with different body types.
Thus, 2 rows from the bottom will already be done. Let's turn to the more abbreviated diagram 5.3. — there are two motifs, which are adjacent to the sides of the neckline itself. We'll get the front top.
Tip - connect all the finished elements when working with the last row.
Then we move on to 7 motifs, where there will be 5 petals. There is diagram 5.2 for this. Next, we create four elements for the sleeves and three for the back of the product. Then we will connect all three on the back, tying up all the previous motifs, and then we will connect them in the outer row with the front shortened ones.
This is how the short sleeves will be connected to the armhole line. Now you need to fill in all the gaps that remain between the elements. To do this, you will need diagram 5.4, we will gradually connect everything, as in the outermost row of the product.
All that remains is to do the most difficult work - to assemble the entire product. This will be a little more difficult for beginners.
The neckline needs to be tied with two single crochets, slightly seated, as if to make the cutout on the back a little smaller. Now you need to wash the entire fabric and steam it.
A bright, summer, unforgettable blouse that will be the highlight of any look! All it takes is a little work and such an ideal product will hang in your closet. The color in the master class is gray-blue, but the craftswoman can choose as she wishes. The knitting will have raised flowers, and it is best to use section-dyed yarn to make it look more original.
A description is needed to understand the whole work.
So, what will you need? A total of 150 g of sectional dyeing in blue yarn, gray yarn, preferably consisting of 55% cotton and 45% acrylic. It is better to use a No. 2 hook and a sewing needle. We also need diagrams.
There will be several elements in total, which we will consider step by step.
The first large element - circuit 10-1 is used for work. Knitting should start from the center to the circle. Measure the product as you work. The diameter should be 25 cm. The middle element should be done in 10-2 increments, starting from the 1st to 7th rows. Knitting also - from the center to the circle. Work diameter 14 cm.
Small element No. 1 is picture 10-2, knitting from 1 to 5 rows. We work from the center to the circle, the dimension is 11 cm.
We perform small element No. 2. The same scheme as above. Only knitting goes from 1 to 4 rows, 8 cm.
We create the “flower” element - picture 10-3. The petals will be placed in tiers, knitted from the center. The diameter should be about 12 cm.
Let's get acquainted with “chaotic” knitting. For this we use gray yarn. It will be needed to mask large holes between all elements. Usually this is an arch consisting of different options - air loops, connecting columns, single crochet and double crochet. Of course, it depends on the size of the holes. The canvas should be smooth, strong and uniform.
Let's start working. All important components of the work are depicted in pictures 10-1 and 10-2. Work with light blue yarn or make up with gray yarn. Then combine all the elements into one product, knitting the pattern discussed above. So let's fill all the gaps between the elements. This is called Irish lace, such a special technique.
By the way, this knitting can be done on a round yoke.
In order for the product to turn out to be of high quality, you need to know several rules. First, work with the patterns so that there are even parts and you can take into account all the seams, you can make adjustments, etc. Then come up with a good plot for the composition, which will consist of different elements. Work hard on your sketches so that all seams and lines are even.
Don’t forget to measure your parameters well so that the parts fit exactly according to them. Knit the required number of all elements. Then lay them out on the pattern with the wrong side on top, pinning them. Sew all the elements together with thread. Combine them into one product, remembering to use a “chaotic” mesh in the right places. We remove the finished craft from the patterns. The neckline, edges and armhole must be tied with blue yarn according to diagram 10.4.
Video on the topic of the article
Watch the video tutorials for inspiration and experience.
