How to make a transformer out of paper. Transformer toy made of paper

Origami art appeared in ancient times in the East. Recently, its popularity has begun to grow and this technique has spread throughout the world.

There are many options to create a variety of paper crafts, but the most interesting are the dynamic ones. With the help of this video instruction, you can easily create an unusual transforming paper toy for your child! It won't take you long. This toy will appeal not only to kids, but also to adults.

Transformable paper toy

You will need

sheet of thick A4 paper
thin tape
scissors
ball pen
pencil
ruler

Draw a template of the future transforming toy on a piece of paper. Using a pen and ruler, measure strips 3.5 cm wide. On one A4 sheet you will get 8 such strips. Then, using a pencil, mark each strip into 3 parts: 3.5 cm high, 5 cm and 6 cm high.

After this, cut the strips with scissors and bend each into a triangle, the pencil lines are the fold lines. As a result, you will get 8 spare parts of a transforming paper toy. Connect them as shown in the video, and the toy will be ready.

There is nothing complicated about this; such a craft will not take up much of your time. This transformer has a huge number of combinations, so you won’t get tired of it on the first day!

Not only children love toys. Many adults are also not averse to having fun, especially when it comes to cheerful groups when they want to have an interesting time. And here it can come to the rescue, since it is in this technique that the original transforming star, capable of modification, was made. Another name for this is the ninja star, the transformability of which will surprise many.

To create such a star you will need 8 small sheets of square paper, it is better to take them in different colors - 4 of each.

We begin to put together one module. To do this, we make folds along the diagonals.

Then we make another fold in the transverse direction.

Having arranged the workpiece as follows, we make folds in the upper corners.

Now we fold one of the blanks of the future star in half, making a fold in the vertical direction.

The lower right corner needs to be carefully tucked inward along the previously made folds.

Using the same principle, it is necessary to make 7 more modules - one half of which is red and the other half yellow.

Now we proceed directly to assembling the star. To do this, take modules of different colors and place one inside the other.

On the plane it should look like this - the top edge of the red and yellow module should be located on the same line.

The protruding corners of the red blank must be bent inside the yellow module. This is how the first connection was made.

We continue to connect the modules in the same way, alternating colors.

The end result should be a ring of 8 modules.

If you gently press on it from all sides, the individual elements begin to move and our craft takes on the appearance of a star, as in the photo. You can return the star to its original position by moving all the modules to the sides in the same way.

The art of origami attracts us with its simplicity of execution and the beauty of the finished figures. It helps you relax, gradually turning the handicraft process into a meditation session. This method of making origami in the form of figures of animals and plants can be the best option for relaxation after a working day.

Paper swan

Swans were one of the first figures that Chinese origami masters began to fold. It is believed that the swan brings warmth and light to the house in which it is located.

In fact, an origami pattern like a swan is very easy to learn. To make a cute paper bird, you will need a square sheet of any size.

Place the sheet so that the bottom corner is facing you.

Bend the workpiece vertically diagonally and return to its original position. Fold the side corners to the center line in the same way as in the diagram.

Now fold the sides towards the middle by about half a centimeter.

Fold the workpiece in half along the center line with the folds facing outward.

Lift the sharp corner of the workpiece upward, forming a neck.

Mark the bird's head by bending the neck in the middle.

Bend the swan's wings slightly as if its feathers were being blown by the wind. Cut out a large oval from blue paper and place several of these swans on it - you will get a whole pond with peacefully swimming birds in origami style.

Despite the fact that computers, phones and tablets have literally occupied the life of modern people, adherents of the old traditions still remain. This is good news. One of these ideas, which at first glance is a thing of the past, but nevertheless has not lost its originality, can be called paper modeling. Paper modeling is a fun and exciting process that people of all ages can become fans of.

It is worth noting that this type of entertainment is widespread everywhere. You can construct many models from paper: simple and complex, large and small, three-dimensional and flat. You can fold simple geometric shapes, or you can create intricate three-dimensional models of planes, ships and buildings. The main thing in this matter is imagination and creativity.

Perhaps the most popular craft that can be constructed from paper is a transformer. Essentially, a transformer is an object capable of transformation, i.e., permanently changing its shape. The degree of complexity of paper transformers can vary, especially since the World Wide Web offers a wide range of templates, ideas, and master classes on this topic.

For beginners who don’t want to spend a lot of time and rack their brains over complex designs, this short video was created. After watching it, even a child can make such a transformer.

Video lesson “How to make a transformer out of paper”

To make a transformer, you need to purchase:

sheet of colored double-sided paper 12x24 cm;
ruler;
marker;
sharp scissors;
scotch.

Manufacturing process:

Line the paper into strips and divide them into three parts: 5 cm, 4 cm and 3 cm. You should get 8 strips.
Carefully cut out the strips.
Now bend them along the marking lines.
Tape the edges together.
Do this procedure with each strip.
Now connect the resulting shapes two at a time using tape on one side only. The reverse side should remain movable.
Glue the figures two at a time with tape, again on one side.
The final step is to connect the two shapes with tape. Here is a transformer that can be bent in different ways, getting different combinations.

In order for the transformer to more easily perform its direct function, i.e., change shape, the paper must be very thick (150-180 g). It can be purchased at special craft stores.
There is no need to overdo it when playing with the transformer, because anyway, it is made of paper and can tear or split into fragments. If this happens, you just need to glue the damaged places, and the toy will work as before.
Do not leave the transformer near open fire or in direct sunlight. Then it will last longer.

Having learned how to make such a transformer, you can proceed to more complex, voluminous ones. They are small, but fully functional and easily recognizable. For these models, you will need glue, colored markers and rubber bands to hold the individual parts together and make the transformer actually move. All you need to do is print out a template from one of the modeling sites, and then use your imagination and create.

Transformers are very practical and, provided they are carefully assembled and stored, will last a long time. You can delight children with them and teach them to do handicrafts, because such activities develop their imagination. It is quite possible that children will do this even better, since they have not yet learned the boundaries of the material world. Patience, creative thinking and skill with scissors are the main components necessary for a successful job.

You can make unique and unusual things from paper, today I will tell you and show you on video. how to make a transformer out of paper with your own hands. Those. a thing that will fold and unfold like a transformer.

To make a paper transformer with your own hands, we will definitely need thick paper or even cardboard, ordinary scissors and adhesive tape.

1. Cut out a piece of cardboard with a length equal to 24 centimeter and that the width must be 12 centimeters. Let's divide it into three sections. The width of the first section should be exactly 5 cm, then the second - 4 cm, and then the third - 3 cm. Then we need to line the same sheet crosswise again, as a result we should get 8 horizontal stripes. That is, in each column we will have 8 rectangles high 3 cm.

2. Then we will take scissors and very carefully cut our workpiece along horizontal lines into strips. As a result, we got 8 stripes, each of which has 3 rectangle. Now we slowly bend each cut strip along the lines so that the result is a figure similar to the letter “ P».

3. Immediately after this, we connect the edges of one of the figures so that it takes the shape of a triangle. The resulting figure must be secured with tape. In the same way we connect the edges of all the other strips, secure them with tape, as a result of which we get a set that consists of 8 volumetric modular triangles.

4. Now we need to carefully take 2 module and fold them so that they are on top of each other. Carefully glue the two modules into one using tape. We need to glue the rest of the shapes together in the same way so that the result is 4 double figures.

5. Repeat the previous operation again, that is, again carefully fold these same modules, 2 at a time, together using tape. As a result, we got 2 parts, each will consist of 4 modules.

6. Next, on one of the sides of the figure, in the very place where the lower and upper modules of each of the parts are connected, you need to glue a strip of tape, and we have 2 Quite flexible parts.

7. After this, we need to put them side by side so that on top there are squares whose side sizes are 3x3 cm, and at the bottom there are edges that form an angle. And again between 2 We glue a strip of tape with the top squares.

8. And now our magnificent transformer is ready.