Interesting slippers with 2 knitting needles with a description. How to knit slippers? Knitted slippers with patterns and descriptions for beginners. Simple knitted slippers with felt soles

Slippers knitted using a wide variety of patterns (including two knitting needles) are an excellent alternative to indoor shoes for children and adults, as well as a touching, sincere, warm hand-made gift for loved ones.

Even the most inexperienced craftswomen, familiar only with the basics of knitting, can make this useful element of their home wardrobe; to do this, they just need to choose a suitable model with a description of the work and strictly follow the recommendations.

Knitted slippers must be not only beautiful and warm, but also comfortable to wear, otherwise they will not be able to fully please their owner.

The comfort of a knitted product largely depends on the yarn, so when choosing it you need to take into account some important nuances:

1. To make the product as warm as possible, it is important to pay attention to yarn composition. Experienced knitters recommend choosing natural wool and wool blend threads for socks and slippers. Products made from them are very warm, breathable, and also the most durable.
2. The second important parameter is yarn thickness. If you choose a thin thread, the slippers will not be warm; if the yarn is too thick, the product may not be very comfortable to wear. The best option is threads of medium thickness: 200-300 m / 100 g. You can also take thinner yarn, but in this case knit the product in 2-3 folds of thread.
3. If slippers are going to be knitted for a child, you should give preference to a special one. children's yarn, because it is hypoallergenic, has a safe composition and is very pleasant to the touch.
4. Choice product colors always remains up to the craftswoman, but if the slippers will be knitted from various leftover yarns, it is very important that they not only match in color, but also be approximately the same thickness and texture. If this simple rule is not followed, the knitted fabric may turn out uneven and sloppy.

What sole to choose (make) for slippers

The soles of slippers can be made of various materials. The simplest and most common option is a sole knitted from the same or denser yarn as the slippers.

For strength, many needlewomen add another thread to the main thread when knitting it.

If a more wear-resistant option is required, the sole can be made of felt or thick leather. Its shape is easiest to cut out using a suitable insole. The sole can be made separately and then tied or sewn to the finished product.

Knitting needles

To knit socks and slippers, craftswomen use special stocking needles, which are sold in the form of a set of 5 pieces. They differ in the material of manufacture (metal, wood, plastic) and diameter (marked with numbers).

The material from which the knitting needles are made is not fundamentally important, it is a matter of personal preference.

The number of knitting needles is selected depending on the nature of the product and the thickness of the selected threads. For knitting slippers and socks, it is recommended that the diameter of the knitting needles approximately coincides with the thickness of the thread; in this case, knitting will be as comfortable as possible, and the fabric will be dense, even and beautiful. For example, for yarn 250-300 m/100 g, knitting needles No. 2.5-3 are optimal.

Additional accessories for knitting slippers

In addition to yarn and knitting needles, when creating knitted shoes you may need:

• knitting markers (special plastic hooks used to highlight stitches during calculations);
• hook (with its help it is convenient to hide the “tails” of cut threads, as well as to tie the edges of finished products);
• thick needle with a wide eye (for sewing products).

All of these knitting supplies can be purchased at craft stores along with yarn and knitting needles. Women's and children's slippers, knitted by hand, can be complemented with accessories that will make the item more interesting, beautiful and unique in its own way.

For this purpose use:

• decorative buttons;
• beads;
• crocheted flowers;
• bows and ribbons;
• pompoms, etc.

Common abbreviations

Knitting (slippers on two needles): patterns, descriptions of work presented below contain generally accepted abbreviations:

• Loops - p.;
• front loop - l. p.;
• purl loop - i. p.;
• edge loops - edge;
• row - r.

Simple slippers on two knitting needles

This simple model of slippers can be knitted on two knitting needles in literally a couple of hours; the proposed pattern is an ideal option for beginning needlewomen: it will help you “teach” your hand and will delight you with its original appearance. Calculations are given for foot size 38-39.

Required materials

Scroll:

• Yarn (300m/100g) – 1 skein.
• Knitting needles No. 3.
• Knitting markers.
• Needle for stitching.
• Additional accessories.

Sequence of work

Execution:

Slippers with two knitting needles made of rectangle

This original model of slippers is reminiscent of oriental shoes in appearance, and it is very easy to knit it on two knitting needles, because while working you don’t even need to make any increases or decreases according to the pattern. The base is a rectangle knitted in garter stitch (all rows are performed only with knit stitches).

Such tracks made from sectionally dyed yarn look most impressive., but you can knit them from plain threads and from multi-colored leftovers.

To work you will need:

• Yarn (250 m/100g) – 1 skein.
• Knitting needles No. 3.
• Needle.
• Hook.

Sequence of work

Execution:

1. First of all, they perform calculations so as not to make a mistake with the size of the slippers. Measure the length of the foot, multiply by 2 - this is the required width of the rectangle. From the yarn you like, knit a test sample of 10 stitches, measure it and calculate the required number of loops for the resulting width.
2. Based on the resulting calculations, cast on the loops on the knitting needles, make a rectangle 12 cm high with garter stitch. Close the loops, use a hook to process the top in any convenient way - columns, picots or “shells”.
3. Fold the rectangle in half, form a toe by folding the edges of the product into a cone shape. Sew along the sole line.

Men's knitted moccasin slippers

Men's slippers, reminiscent of moccasins, are knitted on two needles according to the given pattern quite easily and quickly, but at the same time they look very original. The calculations given correspond to sizes 40-41. The entire product is made in simple garter stitch, that is, in all rows the loops are always knitted only with knit stitches.

To make them you will need:

• Medium thickness yarn – 80 g.
• Knitting needles No. 3.
• Hook for decorative processing.

Sequence of work

Execution:

Slippers with two knitting needles without seam

The most comfortable for adults and children are socks and slippers knitted on two knitting needles using a seamless pattern: they fit snugly to the foot without causing discomfort when worn. Seamless slippers are also beneficial because they can be worn not only at home, but also worn under shoes in cold weather.

The master class presents calculations for foot sizes 36-38.

Prepare materials:

• Yarn (250 m/100g) – 1 skein of main color, 50 g of finishing yarn in contrasting color;
• Knitting needles No. 3.

Sequence of work

Execution:

• The main yarn is cast on 47 sts on knitting needles. Rows 1-6 are performed with a standard elastic band (chrome, 1 sp, 1 st).
• Find and mark the center (24th stitch) with a knitting marker. Continue working with the finishing thread: chrome, *1 sp, 1 lp, 1 sp, 1 st transferred to a knitting needle (do not knit, thread at work) * - then repeat from * to * to the center. A yarn over is made in front of the marked loop, the central one is removed, another yarn over is made, and the row is completed by analogy with the first half. The wrong side must be knitted the way the pattern looks, the removed loops are also transferred (not knitted), the thread is left before work. Yarn overs are also made before and after the central loop, while the yarn overs from the previous knit row are knitted with a crossed knit stitch.
• Switch to the main yarn again: chrome, * 1 i.p., 1 l.p. move (thread at work), 1 and. p., 1 l. p. * - repeat from * to * to the center. The central loop is knitted, and yarn overs are also made before and after it. Knit to the end of the row according to the same pattern. The purl row is performed in the same way as the previous one.
• According to the described principle, 14 subsequent rows are repeated, alternating the main and finishing threads.
• Proceed to knitting the sole: count off the middle 15 stitches and mark with markers. Knit the main yarn with an elastic band according to the pattern up to the central 15 stitches. They are also knitted with an elastic band, the outermost loop and the first of the side row are knitted at the same time. The work is unfolding. Knit 14 stitches according to the pattern, the outermost loop is knitted simultaneously with the first from the side row, then the work needs to be unfolded again. Continue knitting according to this principle, in the end only 15 stitches should remain on the knitting needles.
• Heel. On both sides of the central 15 sts, 16 sts are picked up from the edge stitches. The heel is formed according to the same principle as the sole, i.e. you need to knit two loops at the same time from each edge until only 15 stitches remain on the knitting needles again. Close the loops. Using a hook, hide the tails of the cut threads, decorate as desired.

Children's slippers with two spokes

In winter and autumn, it is especially important to ensure that children’s feet are always warm – both at home and outside. Foot slippers will ideally cope with this task, and besides, they can be knitted according to the given pattern on two knitting needles literally in one evening. Calculations are given for slippers for a child up to one year.

For knitting you will need:

• Children's wool or acrylic yarn - 60 g of the main color, 30 g of another color for finishing.
• Knitting needles No. 3.
• Hook.

Sequence of work

Execution:

You can take any of the above patterns for knitting slippers on two knitting needles as the basis for your work, and vary the size depending on your needs, adding or subtracting the number of loops and rows.

The same can be said about the design of knitted slippers: color solutions, variations on patterns and decor have no restrictions. Knitting is a creative process that brings not only practical benefits, but also pleasure.

Video: knitting, slippers on two needles patterns

How to knit slippers without seams, video tutorial:

Traces on two knitting needles, watch in the video clip:

Slippers on two knitting needles are knitted quickly and easily, and they turn out very soft, warm and beautiful. When it’s cold, you really want to warm up and knit something cozy and warm. What if the whole process takes no more than one evening in front of the TV? We want to please you with clear, simple and cute options for slippers - socks that will perfectly warm your feet and can be a wonderful gift.

Slippers with two spokes description:

Slippers are knitted on two needles, starting from the sole. The slippers are knitted using knitting needles No. 4.

Slipper size 23 cm in length.

Knitting density: 20 loops per 20 rows - sample 10*10 cm.

Sole:

Cast on 26 stitches

Row 1: knit all stitches, add one stitch at the beginning and end (28 stitches)

Row 2: all knit stitches

Rows 3 - 16: repeat row. 1 and 2 (42 loops)

Row 17: knit, knit 2 stitches at the beginning and end of the row. knit together (40 stitches)

Row 18: all knit stitches

Rows 19 - 32: repeat row. 17 and 18 (26 loops)

Top:

Row 33: cast on 8 stitches (heel stitches) and knit. (34 loops)

Row 34: all knit stitches. at the end add 1 loop (35 loops)

Row 35: knit stitches

Rows 36-48: repeat row. 34 and 35 (42 loops)

Row 49: cast off 24 stitches, complete knit row (18 stitches)

Row 50: knit stitches

Row 51: purl. loops

Rows 52-56: repeat row. 50 and 51 (18 loops)

Row 57: cast on 24 stitches and knit. (42 loops)

Row 58: knit stitches, at the end knit 2 knits together. (41 loops)

Row 59: knits. loops

Rows 60-73: repeat row. 58 and 59 (34 loops)

Cast off all loops, leaving some length. thread.

Sew and decorate to your liking!

Slippers on two knitting needles - step-by-step photos of the knitting process:

Before you start working on slippers, select the material and tools.

Yarn. What do you need to know?

Varieties of yarn

1. Natural

• cotton

Pros: yarn, easy to work with; wide range of colors
Cons: long drying time after washing; If the washing temperature is incorrect, the product may “shrink”

Pros: yarn, easy to work with; quick drying after washing
Cons: the color range is limited to natural shades; If the washing temperature is incorrect, the product may “shrink”

• wool

Pros: the yarn is warm; large selection of colors and types
Disadvantages: the yarn is very finicky in subsequent care; if the washing temperature is incorrect, the product may “shrink”; if dried/ironed incorrectly, it may stretch; often irritates the skin and can cause allergic reactions (especially in children); wears out quickly with active wear

1. Mixed

Combines the best properties of natural and artificial materials

1. Artificial

• polyester
• acrylic

Pros: good selection of colors; the yarn is easy to work with; good heat capacity (especially acrylic)
Cons: yarn can become electrified; characterized by poor hygroscopicity; during wear, so-called “coils” may appear on the product; some note the characteristic “creaking” of the yarn

Knitting needles and crochet hook. How to choose the tool number?

1. For threads less than 4 mm thick, the needle thickness should be 1 mm larger. For example, the thickness of the yarn in the figure is 1 mm, the knitting needles are 2 mm
2. For threads with a thickness of more than 4 mm, the thickness of the knitting needles should be 1.5-2 mm larger. For 3mm thick yarn, the best working needles are 6mm needles.

1. If you are going to knit a voluminous pattern with braids (plaits), the size of the knitting needles should be another 0.5 mm larger
2. An openwork pattern or a pattern with dropped loops requires knitting needles 0.5 mm smaller than expected based on the thickness of the yarn

A small reminder on choosing the thickness of yarn and knitting needles is presented in the infographic below

The hook is selected by analogy with knitting needles

Important: the tool number corresponds to its thickness. For example, No. 2.5 means that the thickness of the knitting needles/hook is 2.5 mm

Basic knitting techniques for knitting needles

1. The simplest set of knitting stitches

Advice. If you are working with thin yarn, it is better to make a cast on 2 knitting needles, so the edge will be more elastic

• To calculate the length of the free end of the thread for a set of loops in centimeters, multiply the number of loops in the description by 2
• Make a loop in any way convenient for you and put it on knitting needles folded together. Tighten the loop a little
• Thread the threads around the thumb and index fingers of your left hand. The free end of the thread should be on the thumb, the thread from the ball should be on the index finger. Secure the threads by pressing them against your palm with your free fingers.
• Hold the loop on the knitting needles with the index finger of your right hand

1. Hook the thread lying around your thumb with a knitting needle (movement 1 with the red dotted line in the diagram)
2. Guide the knitting needle with the thread hooked on the left side of the index finger (movement 2 by the dotted line in the diagram)
3. Make a knitting movement from top to bottom → from right to left → under the thread on the left of your thumb. Then slip the yarn off your thumb, forming a loop on the needle (movement 3 with the dotted line in the diagram). Cast on the required number of stitches

1. How to knit a knit stitch

1. How to knit a purl loop

1. How to knit a yarn over

1. How to knit two stitches together with a knit stitch slanted to the right

1. How to knit two stitches together with a knit stitch slanting to the left

1. How to close loops

Basic crochet techniques

The first loop of the air chain

1. First loop and air chain

1. Single crochet, half double crochet, double crochet

1. Elastic band made of posts, ring, connecting post

The basics are covered, let's start knitting

Beautiful knitted slippers, description

Trendy patchwork style slippers will definitely please and warm the people you love. The knitting technique is very simple and even beginner knitters can do it.

In addition, the pattern “Squares knitted diagonally” is suitable not only for knitting slippers, but also for making blankets or decorative pillows

A short introduction before work

1. Determine your foot length. The photo below will tell you how to do this correctly.

1. The diagonal of the base square should be equal to ½ the length of the foot. For example, for a foot with shoe size 37 and a foot length of 22.6-23.3 cm, you will need a square with a diagonal of 11.3-11.7 cm and a side of 8-8.5 cm

Advice. Before you start working directly on the slippers, knit a test square from the selected yarn and calculate the loops taking into account the performance characteristics of the yarn, the knitting needles you have chosen, and your knitting style

1. The description below assumes the finished product will fit a women's average size (37-38 or M)

1. Required materials and tools:

• yarn of your choice (for women's and men's slippers - 300-400 g, for children's slippers - 150-200 g)
• knitting needles 2.25 (correspond to yarn characteristics)

1. Basic knitting - garter

Knit and purl rows are knitted with knit stitches

1. Knitting density: 46 loops = 10 cm

How to knit square 1 and square 2. Design of the toe/toe of the product

Cast on 37 stitches on the knitting needles
1st row and all odd numbers: knit stitches
2nd row: 1 edge loop, 16 knit stitches, 3 knit stitches together (slip 1st of the three loops without knitting, knit the 2nd and 3rd stitches together, put the removed loop on the knitted one), 16 knit stitches, 1 edge stitch . After knitting a row, there are 35 stitches left on the knitting needle.
3rd row: 1 edge stitch, 15 knit stitches, 3 knit stitches together, 15 knit stitches, 1 edge stitch. After knitting a row on a knitting needle - 33 loops
5th row: 1 edge stitch, 14 knit stitches, 3 knit stitches together, 14 knit stitches, 1 edge stitch. After knitting a row on a knitting needle - 31 loops
Knit, decreasing three loops in each even row until there are 9 loops left on the knitting needles



Take a control measurement of the connected element and make sure that the diagonal of the square is equal to ½ the length of the foot of the future owner of the slippers



You have 9 loops of square 1 left on your knitting needle. They will become the basis for square 2
1st row: 9 square stitches 1, knit, add 14 stitches along the edge row of the left side of the square. On the knitting needle: 23 loops
Row 2: Knit 14 stitches and extend the row with 14 stitches along the other edge of the square. You have 37 loops on your knitting needle



Knit by analogy with square 1
All odd rows: knit

When the last loop is closed, you will get a kind of “boat” that will form the toe of the future sneaker

How to knit square 3 and square 4. Design of the side parts of the product

Cast on 37 knit stitches along the edge row of one side of the sock
Continue knitting according to the pattern
All odd rows: knit
All even: knit 3 center stitches together



When square 3 is completed, knit symmetrical square 4

How to knit square 5 and square 6. Heel design

Continue working according to the established scheme
Cast on 37 knit stitches along edge sides of squares (3 and 4)
All odd rows: knit stitches
All even: knit 3 center stitches together
Continue knitting until there are 9 stitches left on the needle.
By analogy with the design of the toe of the product, design the last square of the heel



All that remains is to create an armhole for the ankle and the slippers are ready. The knitting algorithm for the second slipper is similar to the first
The armhole is designed in any way convenient for you

• using stocking needles
• hook

Knitted slippers for beginners

If the previous slippers seemed too complicated due to the elements that are tied to each other, try knitting the model below

All you need to do is knit 8 squares with a side of 9 cm and a diagonal of 12.7 (foot length 25 cm, size 39-40)
Basic knitting - garter
Once all the squares are ready, arrange them according to the diagram and sew them together



Wonderful and cozy house shoes are ready

Men's knitted slippers, diagram

This model is distinguished by its ease of execution, since there is no “toe” decrease in stitches typical for slippers, which scares off inexperienced knitters.
These slippers will warm both men's feet and little children's feet.

Materials and tools:

• Thick yarn with density (110 m/50 g) - 200 g
• Knitting needles (according to yarn) - #4.5

Knitting density: 16 loops = 10 cm
Algorithm for knitting slippers, size 43 (27 cm along the length of the foot)

Upper cuff

• Cast on 55 stitches on the knitting needles
• Work the first nine rows in garter stitch.
• 10th row: purl all stitches

Middle part

Select the central knitting loop (28th in a row). The loop can be highlighted with a pin, a special marker ring, or bright thread
11th row: edge loop, 26 knit stitches, yarn over, center loop knitted over, yarn over, 26 knit stitches, edge loop. There are 57 loops on the knitting needle
Row 12 and all subsequent even rows up to row 38: purl stitches
13th and all subsequent odd rows up to the 37th row: edge loop, knit stitch section, yarn over, central loop is knitted, yarn over, knit stitch section, edge loop
37th row: edge loop, 40 knit stitches, yo, center knit loop, yo, 40 knit stitches, edge loop. On knitting needles - 85 loops

Bottom edge

39th row: all front (edge, 83 loops, edge)
Row 40: knit all
Row 41: knit all
Row 42: knit all

Sole

43rd row: edge loop, 2 knit loops together with a slant to the left, 37 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 37 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 81 loops
Row 44 and all even rows: purl stitches
45th row: edge loop, 2 knit loops together with a slant to the left, 35 knit loops, 2 loops together with a slant to the right, center knit, 2 loops together with a slant to the right, 35 knit loops, 2 loops together with a slant to the left, edge loop. On the knitting needles - 77 loops
47th row: edge loop, 2 knit loops together with a slant to the left, 33 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 33 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 73 loops
Close the loops.

The second half pair is knitted similarly. Sew along the edge and sole.

Video: How to crochet men's slippers?

Women's knitted slippers, diagram

Delicate and very elegant slippers, similar to elegant ballet shoes



Materials and tools:

• Yarn - 100-150 g
• Knitting needles (according to yarn) - #2.5

Basic knitting: knit (odd rows are knitted with knit stitches, even rows are knitted with purl stitches)
Additional knitting: garter stitch (all rows are knitted with knit stitches)

Knitting density: 20 loops = 10 cm

Algorithm for knitting slippers, size 37 (23 cm along the length of the foot)

Cast on 35 stitches on the knitting needles, continue working, focusing on the diagram

1st row: edge loop, 33 knit stitches, edge loop
2nd row: edge loop, 32 knit stitches, add one loop from the broach, 1 knit stitch, edge loop
3rd and all subsequent rows up to 17th: knit stitches
4th row: edge loop, 33 knit stitches, add one loop from the broach, 1 knit stitch, edge loop. There are 37 loops on the knitting needle
6th row: knit by analogy with the 4th.

Repeat adding stitches until there are 44 stitches on the needles.

Cast off 20 stitches on straight side B (see diagram), knit the remaining stitches in stockinette stitch (1 row)

On side B, cast on 20 stitches again. Knit 18 rows in garter stitch, removing 1 stitch from side A at the beginning of each knit row (knit 2 stitches 1 knit). Repeat decrease 9 times

From side B, cast off 8 loops. Proceed to design the sole of the half-pair (you can use a thread of a darker color)

The sole is knitted in garter stitch. In each even row, increase 1 knit stitch on both sides of the row. Repeat the addition 8 times. The number of loops will increase by 16.

Then decrease each even row by 1 stitch on each side of the row. Repeat decreasing 8 times until you return to the original number of stitches.

Close the loops. Sew the seams.

How to knit a rose:

• Cast on 50 stitches on knitting needles
• Knit 6 rows in stockinette stitch
• Close the loops
• Twist the knitted ribbon in the shape of a flower, secure with threads
• Sew a rosette to a slipper

You can decorate your slippers with decorative bows, buttons, sequins, etc.

The second half pair is knitted in mirror symmetry

Children's knitted slippers, diagram

By analogy with the previous pattern, you can knit wonderful children's slippers

And another great idea for simple children's slippers, knitted with your own hands

To make such slippers you will need two rectangles:

• one for the sole. Accordingly, the width of this element is equal to the width of the foot, and the length is equal to the length of the foot. Don't forget the seam allowances!
• the second is the top of the sneaker. The width should match the width of the rectangle-sole, the length should be 2 times the length of the first part

Sew the blank rectangles according to the pattern and decorate as you wish

Important: slippers are sewn in a mirror image!

Knitted slippers with felt soles, diagram

The proposed option will not require much time and effort, but will provide warmth and comfort.

All you need:

• felt sole
• yarn
• knitting needles and needle and threads for stitching

1. Knit a long piece of fabric into a scarf. The length and width of the fabric depend on the size of the insole

1. When the fabric is ready, sew it to the insole, following the diagram for children's slippers presented above and the photo below

Knitted slippers-socks, diagram

Sock slippers, known as Japanese knitted slippers, are very comfortable and, like everything Japanese, extremely easy to make.

Video: Knitting Japanese slippers and socks with knitting needles

Crocheted slippers-boots, pattern

A detailed master class on crocheting slippers-boots is presented in the video below

Video: Master class on crocheting slippers-boots

Video “Knitted slippers without seams. Knitted slippers" will reveal the secrets of mastery

Video: Knitted slippers without seams. Knitted slippers

In our hectic life, sometimes we want to relax and unwind. Handicrafts give us this opportunity: sewing, knitting, embroidery. Whoever is closer to which type of activity enjoys it. For most women, knitting is simpler and closer, so now slippers knitted on two needles with patterns and descriptions are very popular. Many talented people who love to knit use these tips.

Any craftswoman must have a lot of multi-colored balls somewhere. Collect them all and create a unique gift with your own hands. The article will discuss how to knit slippers on two knitting needles for beginning needlewomen.

Cozy slippers with two spokes

Knitting these slippers is very simple. Nineteen rows of fifteen stitches - this should be approximately ten centimeters square. To increase, add two yarn overs on different sides. You need to start work from the end and from top to bottom. You need to knit forty knit stitches, and so on for eight rows. Find the center of the product, add a loop on the side and in the middle. Close with a loop over four rows. After knitting ten more rows, close again. When finished, simply fold and sew beautiful slippers. With such a slight movement of your hand you knitted slippers on 2 knitting needles.

Modern slippers

This job is not at all difficult. Prepare threads, knitting needles, scissors. Have all the necessary supplies at your fingertips. Select thread of the required color and thickness.

Take note! If the slippers are intended for the cold season, then take a thicker thread.

To get started, you need to cast on ten stitches and knit sixteen rows with knit stitches. This knitting is suitable for its density, it does not have the property of twisting, and it is called garter stitch. After completing the initial stage of work, you should end up with a six by six square. In further work, focus on these dimensions.

Related article: Cross stitch pattern: "hunters at rest" free download

Cast on nineteen stitches on the same needle.

Now you need to knit six centimeters or sixteen rows.

And on the reverse side, on the contrary, add nine pieces.

Now knit sixteen rows and bind off absolutely all the loops.

Prepare a symmetrical part, it will be needed for another slipper.

Such interesting slippers on 2 knitting needles are knitted without seams, but then they need to be fastened with a hook. Try to fold the product correctly, as shown in the picture.

Start tying with a different color of thread, but choose a fashionable color combination. Connect the edges of the slipper, starting with the toe.

Then bend the workpiece and tie the main part of the slipper.

The heel, tongue and back of the product need to be processed last.

Do the same manipulations for the second sneaker. And such beauty is already ready!

Footprints? Easily!

There is a huge variety of knitting patterns with two knitting needles. This is so interesting. Let's look at an example of knitting such interesting slippers. Work starts from the top of the product. Cast on approximately forty-three stitches the main thing is that the number is odd. Tie with a low elastic band or pattern. Knit in whatever pattern you want, but don’t forget to yarn over to the middle of the loop and after it. In the next row, such yarn overs should be knitted like regular loops. Work like this for fifteen to twenty rows. It all depends on the size of the foot of the person you are knitting these heels for.

Fashion trends and secrets of knitting footwear

Each work has its own highlights. So the creation of footprints has its own secrets.

If a novice needlewoman wants to gain experience in knitting leopards, then in the initial stages it is better to try working with a single-color thread. And when the skill has accumulated, you can make various colored patterns and combine several colors.

Footwear decorated with various ribbons, ties, and flowers are cool and fashionable. Nowadays it’s very stylish to dress up in ankle boots. They look very beautiful and elegant. It is especially popular to attach an elastic band on top.

Knitted products, flexible and comfortable, have been valued at all times, being, as they say today, in trend. That’s why there are so many people who want to learn how to create exclusive clothes and shoes. And if making cardigans, dresses and jumpers requires a very high level of skill, then in order to knit slippers you only need a little patience, as well as a minimum set of knowledge, tools and materials. Our publication is devoted to knitting the simplest models of cozy house shoes, which an inexperienced needlewoman can master.