Airplanes made of paper. How to make a paper airplane that flies for a long time. Airplane with a paper propeller

There are probably no people who have never made even the simplest paper airplane. The older generation remembers that it used to be difficult to get functional and interesting toys, so they showed their imagination and creativity to make them with their own hands.

Experts note that making various crafts yourself allows you to develop your child’s fingers, improve concentration and teach him to use his imagination.

Another advantage is that a paper plane is absolutely safe. This toy can captivate children for a long time. Many parents cannot afford to give their child a modern toy, so the best solution is to make it yourself and involve your child in this activity.

It’s not difficult to make a simple airplane, but there are several options for making a craft that will fly at a relatively long distances. Let's look at several manufacturing methods.

There are many options for an airplane that can fly longer than its conventional counterpart. Today we will make a super airplane, but to achieve results, you need to know a few secrets:

• If you fold the tail section incorrectly, then there is no need to talk about any long flight.
• Maintain symmetry.
• Fold your wings correctly.

We will need to prepare a regular A4 sheet of paper. The whole process takes no more than 3 minutes.

• Place a sheet of paper on a flat surface, bend it lengthwise, exactly in half, and then straighten it out. To maintain symmetry, we will be guided along the fold line. After this, on one side you need to carefully bend the corners along the line, as shown in the image below. This is how we will form the nose of the future aircraft.

• At the next stage, you need to turn the sheet over and fold it in half. If it is not clear, then we are guided by the images.

• Now the folded corners of the spout need to be straightened along the line.

• Turn the workpiece over. Now you need to fold the future airplane along the lines. You should get the same result as in the picture.

• Now you need to fold the workpiece in half. To shape a paper airplane, you need to bend it along the lines indicated in the image.

In order for the airplane to glide for as long as possible, it must be launched softly.

If you don't succeed the first time, try again. You can also watch a video on how to create a paper airplane.

How to make an airplane out of paper that flies far up to 100 meters?

Everyone wants to make an airplane that will fly at least 100 meters. But an ordinary craft cannot overcome this level. According to Guinness Records, such a plane was able to cover a distance of 69 meters. Of course, if you launch it from the 10th floor, it can fly 300 meters.

Creating crafts is a fun process, so it is recommended to involve your child in this activity.

Manufacturing process

To make this craft, you only need a piece of A4 paper.

First you need to form a corner; to do this, you need to bend the right side of the sheet to the left edge. It is very important to avoid distortions, otherwise nothing will work. Therefore, all actions must be done carefully.

Similarly, form the left corner. As a result, you will get bend lines along which we will continue to make the airplane.

The next stage is very important. You need to bend the right corner to the middle of the left line, as shown in the image. Make sure that your red lines match, only then finally bend the sheet.

The edges must match, so follow the lines as a guide. As a result of the last step, you should get the following:

In the same way you need to bend the corner on the left side. Fold both sides over so you have the same look as the image below.

Now you need to bend the top part. Pay attention to the drawing, all lines must match.

At the next stage, you need to bend both corners again to the very center.

We bend the workpiece crosswise, before smoothing the line, you need to make sure that the corners match exactly.

Now let's start forming the wings. You need to carefully bend them on each side; pay attention to the drawing of how the nose of the craft should look.

At the final stage, you should end up with a neat paper airplane like this.

The entire cooking process takes no more than five minutes. If you followed all the techniques correctly, then such a plane will fly up to 100 meters in length. Now you can test it in action in your nearest park.

How to make a paper airplane that flies 1000 meters? Airplane diagram

Of course, no paper airplane can fly a distance of 1 km. The duration and range of the flight depends on many factors: the model of the craft, the symmetry of the folds, weather, terrain, paper quality and others.

Let's consider a simple model that can fly high and far. This is a supersonic plane. To do this, you need to do the following:

1. A sheet of paper needs to be folded in half, only along, and not across, as in other cases.
2. Then unfold it and bend both corners of the sheet to the line to make the nose sharp.
3. Now the nose part needs to be bent towards the tail.
4. You need to step back about 1.5 cm from the last fold and bend the nose, as indicated in the diagram.
5. At the next stage, the workpiece needs to be bent in half lengthwise and wings formed.

To improve aerodynamic properties, it is recommended to bend the edges of the wings so that they point upward.

There is another version of the model, which was developed at the end of the last century by Can Blackburn. Thanks to his design, the aircraft's flight duration was 30 seconds.

1. The edges of the A4 sheet should be folded towards the middle, but the corners should not touch each other. There should be about 3 cm between them.
2. After this, fold 2 cm of the top edge.
3. Carefully smooth out and repeat the process, only in this case, you need to increase the distance between the corners. Look carefully at the diagram.
4. This procedure must be repeated approximately 10 times.
5. Bend the workpiece in half.
6. Leave 3 cm for the body and bend the wings.
7. Bend the ends of the wings upward.

Of course, successful models are not always obtained, so practice and experiment.

How to make a paper airplane that flies 10000000000000 meters. Step-by-step diagram with a motor

If you want your paper airplane to fly long distances, then you need to install a motor on it. You can make it yourself if you have similar experience or buy a small motor in a store. They are usually sold with detailed instructions, but if there are none, then we’ll look at how this can be done.

First you need to make a very ordinary paper airplane.

Now you need to determine the center of gravity where the board will be installed. To do this we will use a needle and with a simple pencil. The image shows that you need to hang the craft in three places and draw a continuation of the line from the thread.

Now you need to install the motor on the model. To do this, secure the board in the center of gravity, and also cut out a place for the propeller.

To make such a model, some experience is required, so it is better to buy a motor and install it on a paper airplane according to the instructions.

How to properly make (fold) a paper airplane so that it flies well?

In order for a paper airplane to glide well, you need to follow the manufacturing technique. Therefore, any model can fly smoothly. Let's consider another version of the model, which is capable of gliding in the air for a long time.

To do this, you need to prepare a blank A4 sheet and a ruler for straight folds.

Preparation method

You need to fold the sheet in half lengthwise and unfold it. Then bend it across. Iron everything well and bend one corner, as shown in the image below. We bend the second corner in the same way.

Then the corners need to be bent again, strictly along the line, and ironed well again. See picture.

Now you need to carefully open the sides and then bend them inward.

Fold the top of each side outward.

Now you need to bend it in the other direction.

After this, open the formed parts only strictly along the contour.

Do the same actions on the other side. As a result, you should have a blank as shown below.

At the next stage, we bend the future model in half.

Approximately 2.5 cm from the base of the model, you need to draw a line on each side

Then carefully fold each wing and iron it thoroughly.

Draw a line on the wings as shown in the image.

Now we bend the corners along the drawn line.

The end result should look like this:

If everything is done correctly, the plane will fly well and for a long time.

Video lesson. A simple paper airplane folding scheme

Even the simplest model will fly high and for a long time if it is made according to all the rules. Try following the instructions in the video below and you will see for yourself.

How long have you been making paper airplanes? I've been here for a long time and have already tried several options. To be honest, I had a fun time.

The children's game of airplanes is no less popular than launching boats on the water. Making a regular airplane is easy; any child can do it. But how to make a paper airplane that flies far and for a long time - we need to figure this out.

Contrary to prohibitions

At the competition, the Guinness Book of Records banned the paper airplane model for its flight duration and range. However, the model has not disappeared anywhere, despite the fact that the author is unknown. Here is a diagram by which you can easily make such an airplane:

For better aerodynamics, it is necessary to maintain symmetry of the bends, especially in the tail of the aircraft. With the wing tips bent upward, flight performance improves by an order of magnitude. Based on the principle of this model, a fighter aircraft is built, soaring high in the sky.

Fighter assembly diagrams:

Its design is quite complex, and it does not fly particularly far. There are several more options to choose from:

This airplane is fast, but cannot fly far due to its narrow wings.

This model can glide for a long time, especially if it gets into an updraft of air. The fins on the wings help distribute pressure under the plane, keeping it in flight.

Many passenger airliners are built on the principle of this model. He flies quickly and is stable in the air.

You shouldn't expect great speed from this design, but it can fly far.

Cargo carriers are very similar to this airplane. They do not exhibit high speeds or flight duration, but they fly beautifully.

On this aircraft, the flaps are lowered, which, together with the large wing area, provides it with a smooth, even flight.

This fighter must fly longer and faster than all the others.

One of these handmade airplanes is sure to fly far. However, it should be borne in mind that the record for the flight duration of a paper airplane is only 28 seconds.

F-117 fighter

We offer you step-by-step instructions.

Step 1. Place the A4 sheet in front of you with the wide side facing you.

Step 2. Bend it to the side, making a fold exactly in the middle. Iron the fold well and unbend the sheet to its original position.

Step 3. We bend both upper corners to the middle line, make clear folds and unfold them back.

Step 4. We bend the same corners again, but now we focus on the folds we just made, and we wrap further, to the middle of the sheet.

Step 5. Bend the top of the triangle down along line 3.

Step 6. Both edges of the upper corners need to be bent inward by about 1 cm and sealed with tape.

Step 7. Fold the sheet in half and bend the future wings, making a fold from the top of the triangle to the middle of the bottom edge of the figure.

Step 8. Make three more folds in the tail of the plane, as shown in the picture.

Step 9. We push the side part of the triangle inside the model, then straighten it out along the nearest fold line, forming the fuselage and tail. We spread our wings.

Step 10. Raise the flaps so that it flies well. To do this, bend the corners of the wings upward, ensuring symmetry. We secure the fuselage with tape.

Hi guys! In this material we will talk about how to make paper airplane for 100 meters flight . Generally speaking, almost any aircraft can fly quite far - it all depends on the altitude from which it was launched. The design features of paper airplanes affect their ability to glide. So an airplane that can glide for a long time will fly for a very long time and far from a height, for example, the 16th floor. The wind will additionally help speed up and prolong the flight of such a paper craft. Let's start our rating of the farthest flying aircraft.

5th place - the simplest paper airplane models

Everyone settled down at this place simple models airplanes that even a child can assemble and which we all assembled in class and let the girls and teachers see. For such tasks, ordinary blunt-nosed airplanes and gliders are quite suitable. Here are 10 of the best easy-to-assemble paper airplanes.

This is the simplest and most popular paper airplane - almost all people know it because they have been collecting it since childhood.

The following aircraft model has a fast and smooth flight. Due to the front supporting wings, the nose does not collapse, providing stabilization, lift and long flight.

The next one will be a blunt-nosed aircraft with increased collision resistance.

The fifth will be assembling a modified plane with a blunt nose. The circuit is simple, but requires careful assembly.

Now I propose to assemble a good airplane from paper with nose wings and vertical rear stabilizers. The shape of the wing of such a glider allows you to fly longer in a straight line.

The next plane has a sharp nose and flies rapidly forward. The fins on the wings stabilize and prolong the flight of such a paper fighter.

The following design has good piercing abilities - the craft looks like a space fighter. It seems that it was created to exterminate enemy personnel.

The largest wings are those of a glider, which has a rather ridiculous appearance. But this does not prevent him from flying very long and far.

The amazing design of this airplane makes it look like a space shuttle or a Boeing. He flies not far, but effectively.

4th place - paper plane "Albatross"

We bend a sheet of A4 paper in half and draw it with our fingernail so that the fold is perfect.

We bend the edges of the paper inward towards the central axis.

After this, we bend the edges at an obtuse angle again towards the center. The edges of the paper should lie symmetrically on the central axis of our craft.

Then we bend the nose of the paper airplane towards the tail and align the centers of symmetry.

Add corner folds so that the left side is parallel to the right side.

We bend it back and bend the sharp nose of the plane back along the flight path. We iron all the seams with our nails.

We bend the wings so that a large area of ​​the wings remains load-bearing. We do everything extremely symmetrically so that the plane can fly further.

At the end we form the tail. In principle, the bend of the tail can be done as in the photo of any size.

We straighten the resulting bends upward so that it ends up in the space between the wings.

We bend the vertical stabilizers upward parallel to the main axis of symmetry of the paper airplane. This is the plane we have - try to fly it quickly.

If you still have any questions about assembling this aircraft, then watch the detailed video with comments.

3rd place - diagram of an airplane made from paper “Hawk”

Now we will assemble another complex aircraft.

First step. Fold the sheet in half exactly in the middle. The quality of the flight will depend on the evenness of the folds. All stages of the aircraft are done in a mirror manner - left and right.

Second step. We bend the left and right sides towards the center.

The third step is to once again take the left and right edges of the paper and bend them towards the central axis of the plane.

The fourth step is to bend the sharp end of the workpiece towards the tail. In this case, the bend line of the sheet should pass through the point of intersection of the edges in the middle of the paper craft. Centering is checked by matching the central bend along the long side of the sheet.

Fifth step. We bend the edges of the paper on the left and right again towards the center, as in the photo. It is important here that the inner layer of paper does not bend or form wrinkles.

Sixth step. We grab the outer fold and open it, and then wrap it inward as shown in the photo. We do the same from the other side of the plane. We take the formed pockets and bend them inside out.

Seventh step. The pointed nose needs to be bent in the opposite direction about 1 cm deeper than the logical fold line. Pockets are formed there, which we bend inside the nose from approximately the middle.

Step eight. We also wrap the tip opposite the sharp nose.

Ninth step. We bend the paper airplane wings parallel to the keel. If the wings of your paper craft match, then the base of the airplane is assembled symmetrically.

Tenth step. We bend the edges of the wings parallel to the main axis of symmetry to form flaps. The plane is ready.

A detailed video on how to assemble such an airplane with your own hands from paper is given below.

2nd place - diagram of an airplane made from paper “Thunderstorm”

We will continue to assemble a paper airplane that will fly for a long time according to a highly complex assembly scheme. We will need, as always, a sheet of A4 paper. This can be plain white or colored paper. You can also take sheets from magazines with medium paper thickness.

The first step is to bend the sheet in half. We remind you that depending on how smoothly and symmetrically your plane is assembled, it will fly in exactly the same way. After bending the sheet in half, unbend it and then move on to the second step.

The second step is to bend the corners to the center - on one side and the other. It turns out to be such a preparation.

Third step. The edges of the paper that formed an obtuse angle on the left are correctly bent again along the line of the nose of the aircraft to the right corners of the paper blank. See how it looks in the photo. Straighten the folds of the paper near the nose especially carefully so that everything is symmetrical.

Fourth step. We see a point at the intersection of the bends of the left and right edges of the workpiece. Along the line through this point you need to fold the airplane in half, as shown in the photo. You can check yourself by matching the lines of the central fold. After bending, unbend, turn over and bend in the opposite direction.

Fifth step. Turn the plane over again and fold the sides on the left and right towards the edge of the inner sheet. See photos and videos for more details.

After this, turn the plane over again and bend the nose forward again.

We turn it over again and turn the strip of folded paper towards the tail of the aircraft blank.

Sixth step. We bend the plane along the central longitudinal axis. It is convenient to bend the stabilizers on the wings in this position parallel to one and the other side.

Seventh step. We bend the wings to the base. Here you can bend it in different ways and experiment, but it is considered optimal to bend it from the nose to the fender liner.

Everything should fit together smoothly and be symmetrical. Then the paper plane will fly exactly 100 meters or more and not lean left or right.

If the plane is going to fly downwards, then you need to bend the back of the wings slightly upward. Thus, the flow of oncoming air will lower the tail of the aircraft and raise the nose up.

1st place - paper airplane diagram “Falcon”

This is probably one of the most beautiful paper airplanes that you can make with your own hands, because it is very similar to the real thing. To fold such a long-flying airplane with your own hands, follow detailed instructions with photos and video at the end.

1 – take a sheet of medium-weight A4 paper and fold the sheet in half to make a paper airplane.

2 - fold a sheet of paper in half for the longest-flying paper airplane.

3 - fold the paper along the edges to make a cool airplane with your own hands.

4 - we also bend the second side of an airplane made from a sheet of paper.

5 - iron the resulting corners of the paper airplane in half again.

6 - open each wing of the plane and turn them around.

In order to make a paper airplane, you will need a rectangular paper sheet, which can be either white or colored. If desired, you can use notebook, photocopier, newspaper or any other paper that is available.

It is better to choose the density of the base for the future aircraft closer to medium, so that it flies far and at the same time it is not too difficult to fold (on paper that is too thick, it is usually difficult to fix the folds and they turn out uneven).

Folding the simplest airplane figurine

Beginning origami lovers should start with the simplest airplane model, familiar to everyone from childhood:

For those who were unable to fold the plane according to the instructions, here is a video master class:

If you got tired of this option back in school and you want to expand your paper airplane making skills, we’ll tell you how to step by step complete two simple variations of the previous model.

Long-haul aircraft

Step-by-step photo instructions

1. Fold a rectangular sheet of paper in half along the larger side. We bend the two upper corners to the middle of the sheet. We turn the resulting corner “valley”, that is, towards ourselves.

1. We bend the corners of the resulting rectangle towards the middle so that a small triangle looks out in the middle of the sheet.

1. We bend the small triangle upward - it will fix the wings of the future aircraft.

1. We fold the figure along the axis of symmetry, taking into account that the small triangle should remain outside.

1. We bend the wings on both sides to the base.

1. We set both wings of the plane at an angle of 90 degrees so that it can fly far.

1. Thus, without spending a lot of time, we get a long-flying airplane!

Folding pattern

1. Fold a rectangular paper sheet in half along its larger side.

1. We bend the two upper corners to the middle of the sheet.

1. We wrap the corners with a “valley” along the dotted line. In the origami technique, a “valley” is the process of bending a section of a sheet along a certain line in the “toward” direction.

1. Fold the resulting figure along the axis of symmetry so that the corners are on the outside. Be sure to make sure that the contours of both halves of the future airplane coincide. How it will fly in the future depends on this.

1. We bend the wings on both sides of the plane, as shown in the figure.

1. Make sure the angle between the airplane's wing and its fuselage is 90 degrees.

1. The result is such a fast airplane!

How to make an airplane fly far?

Do you want to learn how to properly launch a paper airplane that you just made with your own hands? Then carefully read the rules of its management:

If all the rules are followed, but the model still does not fly as you would like, try improving it as follows:

1. If the plane constantly strives to soar upward, and then, making a dead loop, sharply goes down, crashing its nose into the ground, it needs an upgrade in the form of increasing the density (weight) of the nose. This can be done by bending the nose of the paper model slightly inward, as shown in the picture, or by attaching a paper clip to the bottom.
2. If during flight the model does not fly straight as it should, but to the side, equip it with a rudder by bending part of the wing along the line shown in the figure.
3. If an airplane goes into a tailspin, it urgently needs a tail. Armed with scissors, give it a quick and functional upgrade.
4. But if the model falls to one side during testing, most likely the reason for the failure is the lack of stabilizers. To add them to the structure, just bend the wings of the aircraft along the edges along the dotted lines indicated.

We also offer you video instructions for manufacturing and testing. interesting model an aircraft that can not only fly far, but also fly incredibly long:

Now that you are confident in your abilities and have already gotten your hands on folding and launching simple airplanes, we offer instructions that will tell you how to make a paper airplane of a more complex model.

Stealth aircraft F-117 ("Nighthawk")

Bomb carrier

Execution diagram

1. Take a rectangular piece of paper. Fold the top part of the rectangle double triangle: to do this, bend the upper right corner of the rectangle so that its top side coincides with the left side.
2. Then, by analogy, we bend the left corner, aligning the upper part of the rectangle with its right side.
3. We make a fold through the intersection point of the resulting lines, which ultimately should be parallel to the smaller side of the rectangle.
4. Along this line, fold the resulting side triangles inward. You should get the figure shown in Figure 2. Draw a line in the middle of the sheet at the bottom, similar to Figure 1.

1. We designate a line parallel to the base of the triangle.

1. We turn the figure over to the reverse side and bend the corner towards ourselves. You should get the following paper design:

1. Again we shift the figure to the other side and bend two corners up, having first bent the upper part in half.

1. Turn the figure over and bend the corner up.

1. We fold the left and right corners, circled in the figure, in accordance with picture 7. This scheme will allow you to achieve the correct bending of the corner.

1. We bend the corner away from ourselves and fold the figure along the middle line.

1. We bring the edges inward, again fold the figure in half, and then on itself.

1. In the end, you will end up with something like this paper toy- bomb carrier plane!

Bomber SU-35

Razorback Hawk Fighter

Step-by-step execution scheme

1. Take a piece of rectangular paper, bend it in half along the larger side and mark the middle.

1. We bend two corners of the rectangle towards ourselves.

1. Bend the corners of the figure along the dotted line.

1. Fold the figure crosswise so that the acute angle is in the middle of the opposite side.

1. We turn the resulting figure over to the reverse side and form two folds, as shown in the figure. It is very important that the folds are not folded towards the midline, but at a slight angle to it.

1. We bend the resulting corner towards ourselves and at the same time turn forward the corner, which after all the manipulations will be on the back side of the layout. You should end up with a shape as shown in the figure below.

1. We bend the figure in half away from ourselves.

1. We lower the wings of the airplane along the dotted line.

1. We bend the ends of the wings a little to obtain the so-called winglets. Then we straighten the wings so that they form a right angle with the fuselage.

The paper fighter is ready!

Gliding Hawk Fighter

Manufacturing instructions:

1. Take a rectangular piece of paper and mark the middle by folding it in half along the larger side.

1. We bend the two upper corners of the rectangle inward towards the middle.

1. We turn the sheet over to the reverse side and fold the folds towards ourselves towards the center line. It is very important that the upper corners do not bend. You should get a figure like this.

1. Fold the top of the square diagonally towards you.

1. Fold the resulting figure in half.

1. We outline the fold as shown in the figure.

1. We fill the rectangular part of the fuselage of the future airplane inside.

1. Bend the wings down along the dotted line at a right angle.

1. The result is a paper airplane! It remains to see how it flies.

F-15 Eagle fighter

Airplane "Concorde"

Following the given photo and video instructions, you can make a paper airplane with your own hands in a few minutes, playing with which will be a pleasant and entertaining pastime for you and your children!

In this article you will be presented with several popular aircraft designs that differ from each other not only appearance, but also flying properties. To create origami you only need a sheet of paper 20x30 cm or A4. All models can easily be assembled by a 5-year-old child with his own hands without the help of an adult. Waiting at the end of the article detailed description a paper airplane very similar to a modern fighter.

How to make a flying airplane out of paper popular diagrams.

1. Airplanes made according to the first and second schemes are the most common. This kind of origami can be assembled with your own hands quite quickly, despite this the plane flies far enough due to its design.

2. As mentioned above, this paper airplane is the basic model. Almost all children and adults know it.

3. The peculiarity of this aircraft model is its wide wings, similar to a paraglider. This design allows it to float high in the air. When rolled correctly, evenly such a paraglider can fly for a long time, far and most importantly beautifully. Don't expect super speeds from it.

4. This model was obtained as a result of modernization of the first and second schemes. Distinctive feature model of an airplane is its fast and uniform flight. Due to the front supporting wings, the nose does not collapse, ensuring a long flight.

5. Also a very interesting design of a paper airplane. It is very quick and easy to assemble with your own hands. In terms of speed, it is certainly inferior to some previous schemes. But it will give your child a good, stable, long flight.

6 . The model looks like a large passenger plane. It cannot boast of a flight range, but it flies quite beautifully from a great height.

7. A very unusual fighter made of paper. It is easy to assemble, flies quickly and for a long time due to its balanced design.

8 . The blunt-nosed design and wide fenders will delight you long, swift flight.

9. The plane looks very unusual, it looks like a fighter jet. Don't expect any super abilities from him. It will delight you with its unusualness and complex DIY assembly process.

10 . The diagram is very similar to diagram number 8. However, the nose of this model is very steep and folds much neater. Does not affect flight properties in any way.

11. In shape and design it resembles model number 9. It is only a little easier to assemble and flies a little further, due to the ribs on the wings.

12. One of the varieties of fighter aircraft with wing flaps down. Anyone who flies such a plane will really enjoy the stable, fast flight.

How to make a long-flying fighter plane out of paper.

Above, step-by-step diagrams of airplanes were provided. Finally we get to the best part. Now you have to get acquainted with the step-by-step photo instructions for origami, assembling the farthest flying fighter. The plane not only has good flying properties, it also looks great and will give you a lot of positive emotions.

Detailed, step-by-step photo instructions for wonderful origami.

1 . We will need an A4 sheet of paper, it is advisable to take thin paper, so a plane made with your own hands will fly even further. You can choose the color at your discretion. Fold and unfold the sheet in half along the short side.

2 . Fold the sheet in half along the long side.

3 . We bend and iron one corner as shown in the picture.

4 . With the second corner we do the same as in step No. 3. It should look like in the photo.

5 . We fold the resulting corners in half again and iron them well with our own hands.

6 . Open each side and fold inward.

7 . It should look like this.

8 .

9 . We bend the top part of the paper airplane on both sides.

10 . We turn the craft over and do the same on the other side.

11 . Open both parts along the fold line. Look carefully as shown in the photo.

12 . On the other side, do the same, you should get an isosceles triangle.

13 . Along the fold line, fold the shape in half. We get it as shown in the picture.

14 . We mark a line on both sides approximately 2.5 cm from the base of the plane. Along this line we will bend our future wing.

15 . Carefully bend and iron one wing from the beginning.

16 . Folding the second wing

17 . Draw another parallel line. We will need it to accurately bend the stability wings.

18 .

19 . On the second side, in the same way, draw a line and bend a corner along it.

20. You can make small flaps at your discretion; if you make them carefully and bend them a little, your fighter will fly a little further. Also, these fender liners will keep the wings stable at a right angle.

Congratulations, you have just learned how to make a paper airplane. If necessary, you can glue the base of a far-flying airplane with your own hands.