Origami paper machines for kids. Origami car made of paper: interesting models for a kid. How to make a war machine out of paper

One of the most exciting leisure activities is doing crafts. A special type of needlework that both adults and children like is paper designs. Origami paper machine is the most popular variety, familiar in most cases to the male population of the planet.

There are many options for paper machines, ranging from the simplest configurations to 3D models. This will require a minimum set of necessary things. As a rule, this colored paper, cardboard, scissors and glue. In more complex designs, auxiliary elements are used in the form of toothpicks (axles for wheels), plastic bottle caps, and much more.

How to make simple origami paper cars?

All you need is an ordinary A4 sheet and a little time.

• Fold the sheet in half lengthwise. Then bend the resulting corners at an angle of 45 degrees. The corners are bent on both sides. You should get bends resembling arrows.
• Bend the side elongated sides to the middle. The edges of the previously obtained arrows should cover the curved sides.
• Then bend one of the sides together with the arrow to the other edge, and tuck one arrow into the other.

Now, following the diagram, it will be easy to assemble an origami race car out of paper. You can color it however you like.

Middle level

For more complex designs, a diagram and detailed instructions are provided. As a case, you can use a finished cardboard box. The size of the machine directly depends on the dimensions of the box.

1. Draw doors on the sides of the box and cut out window openings.
2. The doors are cut in such a way that there is some margin next to the hood.
3. Wheels are also made from cardboard by cutting out circles from it. For greater strength, you can prepare several circles at once and glue them together. Make holes in the center, into which the axles will then be inserted.
4. Holes are made in the lower part of the body, axles are inserted (skewers, toothpicks, and so on) and wheels are put on them.
5. For the windshield, you can use the usual plastic bottle. In the front of the structure, a hole is cut out for the windshield, and the plastic is fixed with adhesive tape.

Intermediate level - option number 2

How to make origami paper cars using improvised materials?

In the previous version, skewers, scotch tape and a plastic bottle were additionally used.

For a simple racing model configuration, you can use a cardboard base from under toilet paper. The same roll will serve as the basis for the wheels.

1. The surface of the roll is cleaned of glue.
2. Next, small holes are made in it for skewers, on which future wheels will be strung. They are cut separately.
3. The side holes in the roll are sealed with cardboard circles, sizes corresponding to the holes themselves.
4. The base is painted in a suitable color, and a hole is cut in the upper part for the driver's seat. It can be either oval or round.
5. The resulting cardboard cover can not be thrown away, but made into a seat by attaching it to the body with adhesive tape.
6. Attach wheels.

We made a retro model of a sports car.

Retro cars

In order to make a classic passenger car, we need:

• paper;
• scissors.
• The sheet must be square shape. It is folded in half on one side and in the same way on the other, so that folds are obtained on the unfolded sheet, dividing the sheet into four equal squares.
• Fold the bottom half in half so that the edge touches the center. On one side, bend the edges so that you get a triangle.
• Cover the resulting shape from above with the other side to the middle of the sheet, and bend the edges in the same way as the other half.

You can build a hatchback model.

• Take paper of any color square shape. Fold it in half.
• One third on both sides is bent to the inside of the sheet.
• Then all four corners are bent.
• A small section of the vertices of each resulting triangle is slightly wrapped inward. It will turn out a peculiar form of future wheels.
• Bend one of the remaining two corners inward.
• Make an incision on the other corner and also bend inward. From it the windshield and the front part of the passenger car (hood) are obtained.

That's all - the three-dimensional model of the hatchback is almost ready. It remains to decorate it as you wish, draw windows and doors.

How to build a Cadillac

You can assemble an origami car from paper of a popular model. Using paper material different colors, you can make a whole fleet of Cadillac models.

The execution technique is almost identical to one of the above schemes (hatchback).

• The sheet is folded in half.
• Then divide each side into three parts.
• Bend the resulting sashes in different directions.
• Turning the layout over, in the upper, main part, make bends on the sides, giving a peculiar shape to the car body.
• Bends are made on the sides for the wheels. For stability, the corners of the wheels are bent.
• In place of the proposed headlights, small bends are made. The transport is ready.

There is a diverse selection of car models that both adults and children can make out of paper.

For example, official cars are also popular.

The model of a fire engine is assembled from matchboxes glued together. There are enough of them four pieces, which are then pasted over with red paper.

• For the car tower, another box is taken and installed at the very top of the structure.
• A flasher can be built from plasticine, and matches are glued for the stairs.
• Doors and other attributes are made of colored paper.

Schemes for paper origami cars are attached.

Alternative design

AT recent times more and more attention is paid to the modular technique of origami.

The overall design consists of many paper modules small size. Depending on the design model, the modules are attached to each other either by friction or with glue.

If the intended design consists of ten or more rows, then glue is used, since the product will not withstand its own weight and will crumble into elements.

Papercraft technique

Despite the foreign name, this technique is familiar to many from childhood. This is a process when the future product is cut out from the finished template, bent along the specified lines and glued together.

The advantage of this technique is that there is no need to reinvent the wheel, and the finished models are completely reminiscent of the real ones.

The Internet offers a wide range of templates. Both lovers of modern cars and connoisseurs of retro models will find options for themselves here.

Origami is the fascinating art of folding different shapes out of paper. And in this master class, we will tell you how to make paper cars using the origami technique, and also show how to fold a three-dimensional 3D model of a car according to the scheme. This activity is sure to appeal to children, and adults will bring a lot of fun. Therefore, stock up on sheets of colored paper and cardboard and create with your kids a whole fleet of paper cars with your own hands.

Origami paper cars

Required Tools

In order to fold the cars you will need:

• a square sheet of colored paper;
• scissors.

Instruction - Option 1

Let's take a closer look at how to make a typewriter out of paper:

1. Fold a square sheet of paper into four parts, outlining the auxiliary lines, and unfold back.

2. Bend the bottom of the sheet in half again. Then bend the corners down, creating the wheels of the future machine.

3. Bend the top of the sheet along the middle line towards you.

4. Now bend the workpiece as shown in the figure.

5. Bend diagonally one of the corners of the upper part of the sheet, connecting the red dots indicated in the figure.

6. Turn the piece over. simple model cars are ready! (photo_6)

7. Instruction - Option 2
8. Now let's look at how to make a three-dimensional paper machine using the origami technique.
9. To get started, choose a sheet of paper in your favorite color, fold it in half and unfold it back.

10. Now we visually divide each of the formed halves of the sheet into three equal parts and bend one third from the top and one third from the bottom to the inside of the workpiece.
11. Bend the corners on four sides, as shown in the figure.

12. Fold in the small corners of the tops of the triangles to give a more rounded shape to the wheels of our paper car craft.
13. Bend the workpiece in half and lay it in front of you, placing the wheels down.

14. Bend one of the corners of the workpiece inward, along the dotted line shown in the figure.

15. Slightly cut the second corner and also bend inward. Thus, we got the windshield and hood of our car model.

16. The paper machine is ready! It remains only to draw glass, doors, headlights and other details on it as desired.

3D paper car

Necessary materials

In order to make a voluminous typewriter out of paper, you will need:

• Printer;
• sheet office paper;
• scissors;
• cardboard;
• glue;
• colored pencils, markers or paints.

Instruction

Consider step by step how to fold a typewriter out of paper:

Schemes of paper cars are also colored. In this case, you do not need to color anything. And to get a realistic miniature car model, you just need to print the scheme in good resolution on a color printer and fold it according to the instructions. But if the scheme of your typewriter is black and white or there is no color printer at hand, then the model can be painted with pencils, felt-tip pens or paints. Here you can let your imagination run wild and add an interesting pattern or make a car in an unusual color.

Origami is the real art of creating various figures using a regular sheet of paper. From this, it would seem simple material you can create whatever your heart desires, including cars. Moms of little boys can create a real collection of cars of the most different forms and sizes. Kids will appreciate such toys, and the process of their creation will captivate and interest them for a long time. Such crafts will bring a lot of joy to children and at the same time help to save a lot. family budget so that every time during a shopping trip the child does not ask new toy. An origami machine is made of paper according to the scheme quite quickly and simply, you only need a little desire and patience.

racing cars

If earlier various animals, birds and flowers were made of paper, today there are a large number of schemes for creating cars for every taste. These can be flat or three-dimensional figures, very accurate or simply schematic models.

Note. Cars are made from A4 paper, and the process takes only a few minutes.

A very easy-to-implement scheme of a racing car:

1. A sheet of A4 paper is taken and folded into two even parts lengthwise.

1. On one side of the sheet, it is necessary to make a bend at an angle of 45 degrees, walk along it well with your hand and unbend the paper back. The same must be done in the other direction and unfold the sheet in the same way so that the lines remain.

1. From the other edge of the paper, the same actions are taken so that the workpiece looks similar on both sides.

1. After that, one of the sides is taken and reduced to the center. To do this, take the edges of the paper in the middle between the folds and bend these two parts. On the other hand, do the same with paper.

Related article: The scheme of weaving beaded necklace "Andromeda"

1. The edges of the resulting arrows are slightly raised and the edges of the paper are bent towards the center, while dividing each side in half. First, one edge is bent, and then the second.

1. When the paper is folded on all sides, the paper is ironed well and then the arrows are lowered from both sides to make it look like it is shown in the photo.

1. The blank for the future machine is already ready and now it remains only to make a few final touches. The front part is formed from one side of the paper - one and the second part of the “arrow” is bent inward.

1. The resulting workpiece must be bent in the middle.

1. We bend the workpiece to the end and fill the arrow into the arrow.

1. The paper machine is almost ready to make it attractive, it is best to bend the back up to make a spoiler, and from the curved ends of the arrows we form the fenders of the car.

Such a beautiful and original racing car, any boy will definitely like it. It is very easy to make, and with the help of paints, felt-tip pens and pencils, you can decorate it the way the child wants it. By making several of these cars and painting them in different ways, the guys will be able to create a real and diverse collection.

You can understand the technology of creating paper cars with the help of a video where all the actions are clearly and step by step shown. How to create just such a racing car, you can see on the video:

The boys are interested not only in the race and everything connected with it, but also in other car models. Having mastered the most simple and complex techniques origami, you can create a real and quite diverse collection of cars.

From a sheet of paper, you can create another model like this:

Using this simple scheme, you can create various cars by simply adjusting its shape a little. Trucks and patrol cars, minibuses - all this is done quickly and easily, you just need a little imagination and desire.

Paper car is one of the most popular origami. In the Soviet past, many boys at school memorized the scheme for assembling cars from a sheet (most often a school notebook). But over time, the schemes themselves were forgotten, and the current generation has other fun and entertainment. Somehow, at our leisure, we tried to remember and do a few things together with our son. paper machines. We needed a pair of hands and a sheet of A4 paper. This craft can be successfully used for breathing exercises, and if the child is actively involved in the process of assembling a paper machine, then this will also be a good exercise for him to develop his fingers. So let's get started. Take a sheet of A4 paper.

Cars made in the technique of origami - fascinating and useful toy, which can be a good alternative to other machines. You can do such crafts every day, and the child will be delighted with the variety of techniques.

Video on the topic of the article

To better understand how more complex models are made, it is best to watch a selection of videos.