Ball from a plastic bottle with hands. Christmas crafts from plastic bottles: do-it-yourself Christmas balls. Do-it-yourself disco ball for a street Christmas tree - video

In this article, we will show you how to do Christmas decorations with your own hands on a street Christmas tree using available items. Everything ordinary can be turned into something beautiful and magical.
Decorations for the New Year's beauty are not made from anything: polystyrene, cardboard, cones, pieces of wood and even bottles with light bulbs are used. And every piece is unique in its own way. Look at the photo. These balls are handmade from styrofoam.

It is important to know one important detail. Under New Year the weather is not always good, it rains often. Therefore, your crafts should not have something that is washed off or soaked. When the tree is in the house, use whatever you want there.

styrofoam crafts

The material is easy to process and by itself. It will not split, break or hit anyone if it suddenly falls off a branch. Do-it-yourself Christmas toys made of polystyrene foam can be made in any form and in many ways.

Getting ready for work

We need materials and tools:

  • Styrofoam;
  • soldering iron;
  • paints;
  • sequins;
  • needle and thread;
  • glue;
  • sandpaper.

Don't forget that you are making jewelry for street tree Therefore, glue with paints must be resistant to water and frost.

With a knife, we will process a foam blank. The knife should have a thin, sharp blade because the cut should not be too rough. The same applies to the emery skin, choose "zero". Sandpaper will be needed for final processing: we will remove irregularities (burrs, extra tubercles) with it. With the help of paints, we will color our craft, and then lightly cover it with sparkles. We will make a hole with a needle, and send a thread from which a loop will turn out.

Choose strong threads, as a strong wind can easily rip off the decoration!

With a soldering iron, if desired, you can apply recesses in the form of patterns. Glue will be needed if you want to attach, for example, a beautiful ribbon bow to the toy.

Observe safety precautions when working with a soldering iron! When processing foam with this device, poisonous smoke will be released that can cause cancer. Keep this in mind, work in a well ventilated area. It is advisable to use a mask or respirator to protect the respiratory system.

Making beautiful balls

It is best to make Christmas decorations from foam balls with your own hands. They are very common in craft stores. This option is offered because you can’t make a ball out of ordinary foam wrappers. We need balls big size, since we will hang them on a street tree. How more tree, the bigger and brighter the toy!

So, take a clean foam ball and prepare a flat foam pad. We paint it in any color with resistant indelible paint. In order not to get your hands dirty and not to smear the paint from the ball with your fingers, use two toothpicks and stick them into the ball, as shown in the photo. You can paint with a brush or spray can. We stick toothpicks with a ball into the stand and wait for it to dry.

After the ball is dry, you can paint patterns with other paint or glue something beautiful on it. You can apply patterns with the tip of a soldering iron tip, for example, in the form of snakes. Here, play out your imagination. Then take a needle with a thread in the eye and pierce the part of the ball that you think is the top.
The figure shows exactly how to pierce the toy.

Many people use paper clips as a suspension, simply sticking them into the ball, and then tying the thread. In our case, this option will not work: a strong wind will calmly tear the ball off the suspension. The simpler the design, the more reliable it is!

We tie both ends of the thread into a knot, and hide the knot itself. The finished craft will look like a store-bought plastic Christmas tree ball.

Styrofoam figurines

Styrofoam Christmas decorations can also be made flat, in the form of various figures. You will need foam boards. First, with a pen or felt-tip pen, we make a drawing on the foam. Then carefully start cutting. Rough surfaces need to be sanded with sandpaper, otherwise the craft will not look so beautiful.

For example, we want to do beautiful snowflake. We draw it on the foam, then we begin to cut out the internal places.

Always start by cutting out the interior. This is much more convenient, and the risk of breakage of the toy is significantly reduced.

Now we start cutting out the snowflake itself from the foam sheet. It will look beautiful and without painting. It is better, of course, to paint it in silver, gold or metallic blue. A hole must be made from the upper ends so that the snowflake on the Christmas tree is turned with its front part to the viewer. If you pierce directly on the plane, then the snowflake in limbo will turn to us with an edge.

Do not limit yourself to flat figures. cut out voluminous crafts in the form of bells, birds, Christmas trees and so on.
By the way, such Christmas toys can be made from foam balls. For example, a snowman.
Need balls different sizes. One is big, another is smaller, and the third is even smaller. Glue them together carefully with strong glue. You don’t need to paint such a craft, because the snowman should be white anyway. Use indelible markers to draw his mouth, eyes, nose and buttons. You can make him a little hat.

Amazing snowflake - video

From plastic bottles

There are a lot of options, both simple and complex. Plastic Christmas decorations are perfect for a street New Year's beauty. They also do not get wet, have a small mass and are easy to manufacture.

Only large bottles, 1.5 or 2 liters, will do. Toys from small bottles will be poorly visible on a street tree.

Let's make a Christmas tree toy from a plastic bottle with our own hands, which will serve as a bird feeder. We will need supplies:

  • 2 liter plastic bottle;
  • scissors and awl;
  • paints;
  • strong nylon thread;
  • tinsel, ribbons, etc.

In this option, it is a large bottle that is suitable so that the birds have room to eat in it.

We take a bottle and start painting it in any bright color, along with a lid. Spray painting doesn't take long. We are waiting for the paint to dry. We decorate the bottle with ribbons, for example, we knit a bow and fasten it with glue. You can also use stickers. Then we cut out a small round window (diameter 8 cm) in the wall of the bottle so that it is as close as possible to the bottom. The photo shows interesting options bottle feeders, where the upper parts are made in the form of a roof.

First you need to paint the bottle, wait for it to dry, and only then cut out a window for the bird. The paint should not get where the food will lie. An animal can inadvertently swallow a piece of dry paint and get poisoned.

Now unscrew the cork and punch a small hole in it. Take a thread and make a loop. It is better to make the knot large (tie several times). We put the end of the loop so that the knot rests on the bottom of the lid. A simple and useful feeder toy is ready. We hang it on the Christmas tree, pour food and admire the birds.

Flashlight bottle and delicate bells

A very simple option, familiar to everyone since childhood. Such Christmas decorations from plastic bottles are also easy to manufacture and process. We will need everything the same as for the feeder. Only now we will cut vertical stripes on the walls.

For this procedure, a sharp thin knife or scalpel is perfect. It is better not to use a razor blade, as they can easily get hurt.

We cut the strips, the gap between them should be approximately 5 mm. The length of each strip is 15-20 cm, depending on the size of the bottle. Now we need to squeeze the bottle so that all the strips bend in different directions. Let's start painting and decorating. Something bright and shiny can be put into the inner cavity of our flashlight.

A plastic bottle and disposable teaspoons will make a wonderful Santa Claus.

A white bottle will make a unique snowflake.

Green bottles will be the basis for the Christmas wreath.

A little patience and more bottles will turn into a big snowman after a while.

Do-it-yourself disco ball for a street Christmas tree - video

Zoya Reasonable

Christmas toy "Ball from a plastic bottle" - master class

Dear friends and guests of my page, good time of day. Not far off the new year.

We will decorate the Christmas tree. I think many will agree with me that handmade toys bring joy.

Christmas tree toy plastic bottle ball in my opinion, original and very easy to manufacture.

Basic materials and tools for making a ball

Plastic bottle

glue gun

Scissors

spray paint

Ribbons

Decorative snowflakes.

Cut off the bottom of the plastic bottle.


Cut into rings (5-6 pieces). Then we put the ring on the ring and glue it with a glue gun.



We paint the resulting ball with spray paint. I dyed it silver.

Glue decorative snowflakes, beautifully tie a ribbon and also glue it.

Our ball is ready.



Dear friends, thank you for your attention!

Related publications:

Master class on making toys "Clown" from waste material For manufacturing you will need: an empty plastic bottle (2-3 liters, a few.

Every year our garden hosts a traditional safety contest. traffic"The road through the eyes of children." Knowledge of the rules of safety.

In my group, I often use non-standard physical education equipment. I make with my parents. This is what we decided to do now.

The Dymkovo theme captured me and does not let go, so after the paper ladies I wanted to do something more fundamental. Why.

For work we need: A transparent bottle of an interesting shape. Fine salt "Extra". Gouache (various.

Hello, dear colleagues! In the summer you want something simpler, brighter and more fun. Here's a bee you can make from plastic.

For drawing, we need: a sheet of paper, a thin and thick brush, watercolor, water and a plastic card or something that can replace it.

Are you going to buy new Christmas balls for the Christmas tree? Wait! Balls from the store will not go anywhere, but do it yourself new Year decoration it will be much more interesting :) In addition, kids can be involved in this lesson. In this case, it will turn out not only a master class on making Christmas balls do it yourself, but also a lesson in environmental awareness :) After all, plastic bottles are practically indestructible garbage that accumulates exponentially. And so your bottle will serve you faithfully more than once :)

Christmas crafts from plastic bottles will cost you almost nothing, will be made with love, will not be stereotyped, but one of a kind. In addition, they are absolutely safe, which is important if the house has Small child. Make beautiful and original Christmas balls with your own hands from an unnecessary plastic bottle is very simple. Judge for yourself.

DIY Christmas balls from a plastic bottle

To make the simplest New Year's crafts from plastic bottles, we need:

  • - an empty plastic bottle, preferably made of transparent white plastic;
  • – acrylic paint(in this case red and white);
  • - glitter nail polish
  • - glue
  • - scissors

We take a bottle and cut off the neck and bottom from it.

Then we cut the middle part into rings 0.8-1 cm wide. At the same time, it is advisable not to crush the rings so that the ball turns out to be perfectly round, without “scars”.

The resulting rings are glued together. For plastic, it is better to take a transparent glue such as Moment-Crystal, or a special glue for needlework. We take one ring and apply a small amount of glue in two places - above and below. Then carefully push one ring into the other so that they are perpendicular to each other.

We hold the product a little with our hands so that the shape does not change, and let the ball blank dry. Then you need to glue two more rings in the same way to make a ball.

When the glue dries, we start painting our New Year's ball with paint.

The next step will be decorating our future Christmas ball. To do this, we apply an arbitrary pattern with white paint, and then, to give a New Year's mood, we cover the entire product with glitter nail polish.

So that the ball can be hung on a Christmas tree, carefully use a needle to thread the thread in the place where the rings were glued, right under one of the rings - the top one.

To do this, you can use the tape, but you will need to thread it in advance, even at the time of gluing the rings. But it will look more original.

That's all, christmas ball from a plastic bottle is ready. It remains to hang it on the Christmas tree :)

"New Year's crafts from plastic bottles: Christmas balls with your own hands" especially for the Eco-life website

svetlana nedilko

Very beautiful balls, can be made from handmade plastic bottles. With such balls, you can decorate the gazebo on the street, and even rain is not terrible for such balls, they will always be bright and beautiful.

For work we need:

1. Bottoms bottles(12 pcs.).

3. Scissors.

5. Foil or tinsel for decoration.

For one ball, we need to pick up plastic bottles one color and volume of 12 pieces. Cut out the bottom bottles that resemble flowers.

We take one bottom for the center, and we will attach the remaining five to it with a fishing line, having previously made two holes with an awl. In my work at the first stages, I decided to use a stapler. Happened.

Similarly, the first we make the second half of the ball.


Then we fasten them together with a stapler. And at the end

it is best and most convenient to fasten the petals together with a fishing line. To do this, we make two holes in the petals with an awl.

Before decorating our ball, we make a loop of fishing line or braid for it so that it can be hung.

In the middle of the ball, you can put the foil.

In my work, for decoration, I used small balls of tinsel.

That's it, such a ball is both light and beautiful.

I hope my master- the class will be not only interesting for you, but also useful.

I wish you all creative success. Thank you for your attention!

Related publications:

New Year - the fulfillment of the most cherished desires, all adults and children are waiting for magic! Even the smallest fake can be done together.

"New Year's ball" Dear teachers and parents! The long-awaited holiday is coming soon. New Year! Waiting for fairy tales and miracles! To create a festive

Everyone knows how useful it is to walk barefoot on the ground, grass. This achieves a foot massage, which is very useful, as it stimulates the flow.

Developing subject spatial environment- part of the educational environment, represented by a specially organized space (rooms,.

Master class on making a tea set from plastic bottles. Educator: Ekaterina Serikovna Mansurova 1. We will need: one.

Rooster from plastic bottles. Master class Good evening, dear colleagues! This summer, during repairs at the preschool educational institution, I, as an additional teacher.

I bring to your attention a master class on the manufacture of "Hare". Material: 1. One five-liter bottle 2. One 1.5 bottle 3. Glue "Titanium".

With their help, you can decorate your home or garden, as well as make beautiful and original crafts which will please not only children, but also adults.

Most balloon crafts are pretty easy and can be done with the kids.

Here are a few interesting crafts that you can create using regular balloons:


1. Balloon decoration

Glue lots of colorful pompoms to the balloon.


2. Balloon crafts


Decorate small vases with balloons.

3. What can be made from a balloon: a holiday surprise


Make a surprise for your loved one. Inflate the balloons with helium, tie ribbons to them, and attach the ribbons to the bottom of the box with tape.



4. Refrigerator made of balls (photo)

Freeze the balloons with a little water to keep party drinks cool all the time.


5. How to make a drum out of a ball

You can use other containers, but not with a wide neck. You will also need a bag of rubber bands to secure the balloon to the jar.


6. How to make a holiday decoration from balloons and photos


Inflate the balloons with helium, tie a ribbon to them, and attach photos to the ribbon with tape. You can also stick photos with double-sided tape to sheets of white cardboard, make holes in each sheet with a hole punch and tie a ribbon.

7. DIY balloon idea


Fill the balloon with confetti.

Use a white or clear balloon to show the confetti. For making confetti, you can use any colored paper(plain, corrugated, glossy) and scissors, which cut small parts. You can also buy confetti at stationery stores and online.

8. DIY balloon gift

In addition to confetti, you can put money in a balloon and give it to a birthday person.


9. Luminous crafts from balls with your own hands


You can also put LED bulbs into the ball. Such bulbs can be found in small key chains, and they come immediately with a battery.

You can also do it yourself:

* Remove the core (the bulb itself) from the LED bulb, find a small round battery and lean the bulb contacts against the battery (1 on each side). Secure with tape.





10. DIY fruit balloon garland


You will need:

small balls different forms and flowers

colored paper

Scissors

Strong thread.


* Inflate the balloon.

* Cut out leaves from paper.

* Use adhesive tape to attach the leaves to the balls and the balls to the thread.

11. Do-it-yourself master class from balls: jumper for children.


You will need:

small round balls

Scissors.

* Pour some water into one balloon and tie off its tail. Cut off the end of the tail with scissors.

* Take another ball and cut off the tail.

* Slide the water balloon inside the second balloon.

* Take another ball and also cut off the tail and put the workpiece into it.


* Continue adding more balls until the craft is strong enough.

12. Water balloons.


For a holiday, you can fill a few balloons with water and hang them in the yard on a rope.

These balls can be used for different competitions. For example, try to burst water balloons in an unusual way.

13. Balloon Workshop: Decorate plain jars with balloons.


You will need:

colorful balls

jars

Scissors.



14. Balls of thread.


Using ordinary balls, jute thread and PVA glue, you can make such beautiful Christmas decorations. You can add Christmas lights to them.





15. Master class from balls: lollipops.


* Inflate the balloon.

* Wrap the balloon in cellophane.

* Tape the ball on a long stick (plywood). The stick can be painted white.


16. Balloon crafts: ice lamp.


You will need:

Screwdriver or knife

Freezer

Small candle or LED bulbs

Thread or elastic band (to tie the tail of the ball).


* Fill a balloon with water and then tie a tail. You can add dye to the water to color the future lamp in the desired color.


* Place a ball of water in a small bowl and put everything in the freezer for 12 hours.

* When the water in the balloon freezes, the balloon can be removed with any sharp object.


* Make a hole in the ice ball with a screwdriver or knife. Perhaps there will be unfrozen water inside it - it must be carefully poured out.


If there is no water, then making a small hole, you can insert a plastic tube or a small cylinder into it and pour hot water into it to expand the hole in the ice ball.

* Now you can put the ball on a candle or an LED light bulb and decorate your yard or summer house in this way in winter.

To share with friends:
Similar posts