Crochet a blouse for a 2 year old girl. Crochet for girls. Crochet children's blouses with description

p-tasha - beauty needlewoman

I changed and added a little)) It’s not ready yet, there’s a lot of material, please wait)))
1. Mom's sunshine
Girls, I don’t have descriptions or diagrams for the “Mom’s Sunshine” set. I started knitting with a yoke. To do this, I collected a chain of VP and knitted several rows in a circle. knitted with “Ticks” - 1CH 1VP 1CH. Then I divided the knitting and knitted the front and back separately, knitting the armholes. When the yoke was ready, she began to knit a skirt down from it. I have a few closer photos of the drawing, it might be useful:
At the end I tied the sleeves. knitted like this:
1. I knitted a sleeve with the main pattern, a little more than needed.
2. I sewed it, gathering it, into the armhole.
3. knitted a ruffle. attaching it at the beginning and at the end of the row to the armhole.
4. I knitted an elastic band from the inside out.
The lining is made of knitted mesh. I sewed it in the studio.
what I found:

*
2. Top "Buttons"
Yarn:
ANNA 100% cotton (100 gr. / 530 m.), hook No. 1
Size:
104 -110 cm.
Description:
Step 1. We knit a strip of dc 15 dc wide and 102 rows long.
Step 2. We close the resulting strip into a ring and knit arches from 7 VP according to pattern 1.
Step 3. We knit the pattern according to pattern 2.
Step 4. Along the wrong side, using half-columns, we move to the beginning of the last row and knit 2 rows of arches from 7 VP. I marked the places where the arches were attached with red paste. on the arches we knit a pattern according to pattern 2.
Step 5. Repeat step 4 2 more times.
Step 6. We knit the straps - width 11 dc, length 48 rows.
Step 7. We tie the armholes of the sleeve and neck with 2 rows of sc.
Step 8. Decorate with buttons.
Step 9. Top is ready!


3. Top "Bead" yarn "Anna", hook No. 1
Size: 104 -110 cm.
Materials: ANNA yarn 100% cotton (100 gr./530 m.), hook No. 1
Cast on a chain of VP (74 ticks), close it in a ring and knit in a circle
3 rows (diagram 1).
Divide the knitting in half: 37 ticks on the front, 37
tick on the back. then we knit the back and front separately.
Before (diagram 2)

Back (diagram 3)
Having knitted according to the pattern, we knit the straps: width 4 ticks, length 17 rows.
We sew the straps. The coquette is ready. We knit an openwork pattern down from the yoke
according to scheme 4.
Having knitted the pattern according to the diagram, we move along the wrong side with half-columns
to the penultimate row (row of ticks) and knit 3 rows of ticks and again an openwork pattern
according to scheme 4. repeat this step 1 more time.
Next we knit 4 rows of checkmarks (first go to the purl
side with half-columns to the penultimate row) and drawing according to scheme 5.
on the small ruffles obtained on the top (there are 3 of them), we knit arches from 5 VP,
attaching them to the picot. on the arches we knit a pattern according to pattern 6.
Sleeve (knit 2 parts).
We collect a chain from VP and knit 33 ticks on it. Next in each row
decrease 1 tick on both sides until there are 11 left in the work
tick. The sleeve is gathered and sewn into the armhole. Then we knit, attaching to
at the beginning and end of the row, sleeve to armhole, pattern according to diagram 7.
Having knitted the pattern according to pattern 7, we knit the pattern again according to pattern 5.
some working photos:
There is no last photo of the finished sleeve with a knitted elastic band. I knit 1 row of bobbin elastic from the inside out.
We tie the neck of the top according to pattern 8.
We steam the finished top and decorate it as desired.

********
4. “pink cloud” skirt
description
age 3-4 years
VITA COCO yarn 100% cotton 50g/240m, hook 1.25. It took me exactly 2 skeins of yarn to make the skirt.
1. cast on a chain of VP and knit according to the pattern 1 strip with a width of 18 CH and a length of 80 rows.
2. connect the resulting strip and knit five rows of mesh according to pattern 2.
3. add 10 dc evenly. We make additions according to pattern 3 in every 8 dc. + 4 more rows of mesh.
4. Add another 10 dc evenly. we make additions at every 9 dc. + 4 more rows of mesh.
5. evenly add another 10 dc. we make additions to every 10 dc. + 4 more rows of mesh
6. knit a ruffle according to pattern 4. break the thread.
7. attach the thread to the beginning of the first row and knit a ruffle according to pattern 4. break the thread.
8. attach the thread to the fifth row and knit another ruffle according to pattern 4. break the thread.
9. attach the thread to the tenth row and knit a ruffle according to pattern 5. break the thread.
10. Attach the thread to the 18th row and knit a ruffle according to pattern 6.
11. We sew the belt of the skirt, hide all the tails. On the left side we knit 3 rows of bobbin elastic.
12. Steam the skirt and decorate it with flowers.
description of the flower: close the chain of 5 VPs into a ring. 1r. We knit 10 sc into a ring. 2 rub. we knit arches *3 VP RLS* - 5 times. 3 rub. in each arch we knit a petal *2СН 1С2Н 2СН half-column* - 5 times. Sew a bead into the center of the flower.
13. sew a petticoat
14 The skirt is ready.

*****
5. Tunic
And this top is based on christening dress from online http://club.osinka.ru/topic-56766?start=0 I have already knitted for my daughter. Now I repeated it to order.
Yarn ANNA 100% cotton (100 gr. / 530 m.), hook No. 1
I took a few photos along the way. I will be glad if this information is useful
The yoke consists of two parts sewn together. I started knitting from an acute angle, gradually making increases to the desired height. I tried to draw a diagram (though by hand), this is what I got
According to this pattern, I knitted two parts, then sewed them together. In front, the triangles were overlapped. I did the straps like this (I apologize for the quality of the photo, I took the photo late at night).
1. From the top of the yoke, I collected a chain of air loops of the required length. I attached it to the back. Around the resulting armhole I knitted several rows in a circle with single crochets.
2. I knitted several rows of single crochets around the neckline: I knitted from the beginning of one triangle to the other. Then in the opposite direction.
3.I tied it around the neck with an openwork pattern according to this pattern
All

******
6. Panama hat
white yarn MAXI 100% cotton (100 g/565 m), green VANESSA FILATTI GOLD 100% cotton (50 g/300 m) hook No. 1

******************************************
7. I will marry like this!
For this blouse I only have this:
Getting started: cast a chain of VP of the required length, close it in a ring and knit several rows in a circular pattern with a “tick” (1 CH 1 VP 1CH). We divide the knitting in half and then knit the front and back separately. You can refer to these diagrams:
Before. scheme 1

Back. scheme 2
Having knitted according to the pattern, we knit the straps of the required length.
We sew the straps. The yoke is ready. We knit down from the yoke alternating rows loin mesh(1 CH 2 VP 1CH) and openwork pattern: 1st row: arches
from 6 VP. 2nd row: in each arch 2 CH 3 CH 2 CH. 3rd row: arches of 6 VP. At the end, on the rows of the fillet mesh, we knit a ruffle: 1st row: arches from 6 VP. 2nd row: we knit 7 dc in each arch. 3rd row: 5 dc through 1 ch. 4th row: *1 RLS 3 VP*.
We knit the sleeve from the armhole, attaching it to it at the beginning and end of the row. When the armhole is full, knit a few more rows in the round and ruffle as described above. WITH wrong side knit 1 row of bobbin elastic.
We tie the neckline (1st row: arches of 5 VP. 2nd row: in each arch we knit *1 RLS 3 VP* - 3 times).
We steam the blouse and decorate it.
*********************
8. Panama hat 2
beginning of the panama hat diagram 1, fields from the second diagram

There is no description for the hat. I started knitting it according to this pattern. I changed the diagram a little, adjusting it to the desired size
The fields are linked by this. in the fields, in the last row, regilin is tied.

*************************
9. Hat

********************************
10. bandages
description
dial 5 VP + 3 VP for lifting. we knit 1 strip according to the pattern, longer than the circumference of the child’s head
We close the resulting strip into a ring and sew it together. We lay an elastic band on both sides, tying it with one row of sc. knit according to the pattern 2 ruffles
the bandage is ready. All that remains is to decorate it.

One more bandage
yarn YarnArt VIOLET (100% cotton, 50 gr. / 282 m.), hook No. 1
this time I knitted the bandage like this: I folded the elastic band (I knit the spandex rubber band) in half, tied the ends and tied the resulting ring with 2 rows of sc and ruffles according to the pattern
repeated the same rows on the other side. I decorated the finished headband with roses.
I knitted roses according to this pattern. for large flowers I dialed 30 VP, for small flowers 15 VP

*******************************
11. Sundress, the description is in my sun and in the bead


*********************************
12. Dress
Girls, thank you all very much for the reviews and for the leaves!!! I knitted the dress without description. I knitted and re-knitted it several times.
I took a few more photos of the dress
And I tried to describe it a little. I started working with a strip of motifs. Here is his diagram 1
I knitted each motif separately, connecting them as I worked. Then I knitted the top of the dress. To do this, I knitted a series of arches from 5 air loops, and then knitted with the main pattern, knitting the armholes and neckline. Scheme of the main figure Scheme 2
I did the sleeve like this: I knitted 1 motif and attached it to the armhole. The space between the armhole and the motif was filled with arches of 5 air loops. Then 3 rows of sc and ruffle. I knitted the skirt using the main pattern, followed by pattern 3
In the pattern I drew only one row of sc, I knitted 3 of them. Then I made a small ruffle in this place. I finished the sundress with 2 ruffles, in the diagram I drew 1. If you have any questions, ask. I try to help.

And I knit headbands without description. But the principle is this: first I knit a strip of CH, a little longer than the circumference of the head. I close it. I knit ruffles on both sides. At the end I insert a rubber band.

I'll find the rest and write it down
*******************************
13. Snowflake headband

*********************************
14. Sundress
My new sundress
yarn 100% cotton PELICAN (50 gr. / 330 m.), hook No. 1
I took only the first rows in it and repeated them with gradual expansion.
and several photos of the details of the sundress. The last photo shows the wrong side.

***********************************
15. SOSO yarn 100% cotton (50 g/240 m), hook No. 1.25

Scarf
yarn YARNART MERINO DE LUXE (50% wool, 50% acrylic)

*****************************************
16. Cotton bolero
yarn MAXI 100% cotton (100 g/565 m), hook No. 1
Bolero knitted without description. I didn’t make a pattern, I just applied it to a blouse of a suitable size while working. First, I knitted the back and both fronts simultaneously with the main pattern (slingshots from CH 1 VP CH). Having knitted several rows (rows 2-3) I began to knit the armholes. I knitted the neckline from the first row of work, cutting one slingshot on each side for this purpose. Then I started knitting a sleeve: first, several rows with the main pattern exactly (2-3 rows), then decreased. I sewed in the sleeve. Having done this part of the work, then I simply tied the bolero with openwork patterns to the desired size. On the sleeves I used this pattern from Schatz
The bolero is fastened with buttons at the front (hidden under a flower)

bolero yoke pattern

***********************************
17. Top "Colors of Summer"

**********************************
18. Sundress


*************************************
19. Top
Yarn MAXI 100% cotton, hook number 1

****************************************
20. Dress

***********************************
21. Skirt. was planned as a beach one. but, in my opinion, it looks interesting with jeans
Yarn MAXI 100% cotton (100 g/565 m), hook 1. Based on this pattern:

**************************************
22. flower. MK
Step 1. We collect a chain of 5 VPs and close them into a ring
Step 2. 1 VP for lifting + 9 RLS.
Step 3. We knit 5 arches from 3 VPs
Step 4. We knit a petal into each arch * 2CH 1C2H 2CH half-column * - 5 times
Step 5. We tie each petal with another row: * 1CH 2CH 3C2H 2CH 1CH half-column * - 5 times
Step 6. We tie each petal with arches of 3 VP. *There are 8 arches on one leaf, a half-column at the end of the petal* - 5 times.
Step 7. Turn the flower over. Using half-columns along the wrong side, we get to the first row and knit arches of 5 VPs on it (5 arches in total)
Step 8. We knit a petal into each arch: *3CH 1C2H 3CH half-column* - 5 times
Step 9. We tie each petal with another row: *1CH 1CH 2CH 3C2H 2CH 1CH 1CH half-column* - 5 times
Step 10. We tie each petal with arches of 3 VP. *There are 10 arches on one leaf. At the end of the petal, a half-column * - 5 times.
The flower is ready. All that remains is to tie the bead and sew it into the center of the flower
Ready

***********************************
23. cap "Assorted Fruits"
yarn BEGONIA (YarnArt) 100% cotton, hook number 2.
I used this pattern as the basis for the hat
the hat was decorated with flowers (12 VP close into a ring. We knit into a ring * 5 VP 3S4N 5VP RLS * - repeat 5 times. Tie petals with RLS), beads, decorative buttons, satin ribbon.

************************************
24. Skirt

I really love these flowers both in life and in knitting. Very easy to make and beautiful.
yarn - YarnArt Begonia 169m/50g;
hook - No. 2.5.
The size of the rose directly depends on the chosen yarn, hook and the initially selected number of chain stitches. in a chain. I never type them by sight, because... I often tie the same hats and “a little more - a little less” doesn’t suit me. But the first time, of course, you need to go through experience.
We take this diagram as a basis.
We collect a chain of 69 vp.
1r. - we knit a dc into the 5th loop of the chain. Then through one loop into the next ch. we tie the chains with 2 dcs separated by 1 ch. We knit that way. to the end of the row.
2 rub. - knit 3 ch. lifting and turning the work. In the first arch we knit another 1 dc, 3 ch. and 2 dc. Then, to the end of the row, we knit 2 dc, 3 ch, 2 dc in each arch.
3 rub. - we knit 9 dc into each arch of the previous row. We start the first petal with 3 ch. We roll up the rosette, and that’s it. It really takes a long time to knit the 3rd row, but it’s worth it.

*******************************
28. Shrug
For length - the length of one sleeve + the width of the back + the length of the second sleeve. You can remove it from any clothing or ask the child to spread his arms to the sides and quickly try it on. You need to subtract the length of the frill from the result obtained. It is possible (and even desirable) to knit one ruffle stitch in width and height. You can estimate it by eye, I think 10 cm.
For the width - since the width remains the same along the entire length of the shrug (i.e. our pattern is a rectangle), then for the width, measure along the back from the neck and not reaching the waist... Hmmm, it’s hard to explain(((. I'll try differently. So I took a magazine and found a bolero pattern for a 6-year-old girl. The width of the sleeve at the bottom (I liked the sleeve - it's straight, without extensions, as we need) is 18 cm. I added another 2 cm = 20 cm for my 7 years old. The width of the frill will be 4-5 cm. This means that the length of the shrug along the back will be 20 + 5 = 25 cm (the upper frill will lie on the neck). I look at the measurements of the children in the magazine - the length of the back to the waist (for my age) is 29 cm. Judging According to the photo of Natasha's shrug, it does not reach the waist. And my measurement is 25 cm less than 29 calculated from the magazine. So, I took the width correctly.

The described blouse is very warm and beautiful. In order to knit such a blouse, you will need four hundred and twenty grams of 100% cotton yarn, and you can add silk fuchsia thread. A hook for work will require number three. A diagram of the blouse will be shown below the description. So let's make a blouse together using a crochet hook, which is easy to create for a girl if you follow the diagrams!

We crochet a blouse with patterns and descriptions for a little girl

First you need to cast on a chain of seventy-six chain stitches, adding two more lifting loops and continue knitting with the pattern shown in the diagram. Having reached a height of twenty-seven centimeters for the armholes, close the knitting on both sides with a connecting column of six loops. And the knitting can be closed to a height of forty-three centimeters. Thus, the back is ready.

The front part of the product is knitted in the same way as the back. Having reached a height of twenty-nine centimeters, all knitting must be divided into two parts. And at a height of thirty-eight centimeters, it is necessary to make a neckline, which is shown in diagram 2 after the description of the work. Finish knitting when you reach a height of forty-three centimeters.

In order to make sleeves, you need to cast on a hook a chain of forty-two loops, adding two more air loops, and continue knitting according to the pattern, and then perform an increase according to pattern 3. Finish the work, reaching a width of thirty-two centimeters and a height of thirty-four centimeter

To make a hood, you need to cast on a chain of air loops in the amount of eighty-seven pieces, add two more lifting air loops, and continue knitting the pattern according to the attached pattern. Having reached a height of eighteen centimeters in the middle, you need to reduce one rapport in every second row. Already at a height of twenty-seven centimeters the work can be completed.

Before assembling the product, all parts need to be slightly moistened and allowed to dry thoroughly. Next, you can sew the seams and sew in the sleeves. All cuffs and the bottom edge of the product are tied with two rows of single crochets. And each side of the cut must be tied with three single crochets. The hood is folded in half and the narrower side is sewn together. Then it needs to be sewn to the neck, while tying it with four single crochets. The entire finished trim needs to be slightly tucked and hemmed from the inside out, making it look like a drawstring. You can thread a previously prepared lace into this drawstring. Below are diagrams and patterns that show how to crochet a blouse for a little girl:

Let's try to create an openwork children's model with our own hands

The openwork children's blouse described below is intended for the age of thirteen years. In order to knit it, you will need one hundred and fifty grams of acrylic yarn of two different shades. The crochet hook you need is number two and a half. For decoration you will need small beads, about five grams.

The main pattern is knitted according to pattern 1. All patterns are located after the description of the work.

To make an oblique mesh, a chain of six air loops is cast. The chess pattern is knitted according to pattern 2.

All knitting should be started from the neck down. To do this, you need to cast on a chain of one hundred and twenty air loops, so that it becomes forty-eight centimeters along the entire length of the neck. Next, continue knitting the product in one piece. Knit according to pattern 1, starting from the first and ending with the tenth rows. Thus, there should be twenty-four rapports.

The entire width of the yoke should be twelve centimeters. All ready-made elements of the yoke pattern need to be distributed. For the back and front of the product you need seven repeats, and for the sleeves - five repeats. After distribution, the front part of the product and the back are connected. Continue knitting with a bias net in a spiral. The product is knitted in this way up to the waist.

Before moving on to the frill at the bottom of the product, you need to knit checkerboard pattern four centimeters. After this, knit one row of double crochets and continue knitting another twenty-two repeats of the pattern, starting from the fifth row and ending with the tenth row.

In order to knit the sleeves, you need to make four rows first with an oblique mesh, then two rows with a checkerboard pattern, and finish with one row of double crochets.

The product can be assembled. First you need to tie the collar with a dark thread using three single crochets. The second row is already knitted with a double crochet, while you still need to evenly distribute the beads. The lower part of the blouse is tied with single crochet stitches, and you need to alternate three stitches and a “ring” of air loops in the amount of three pieces. Thus, the openwork blouse for the girl is ready. Below are the diagrams and pattern according to which you need to knit the patterns:

Video on the topic of the article for beginners

Below you can watch some video tutorials that you will definitely like:

Openwork and airy, a crocheted blouse for a girl will be an excellent addition to the image of a little fashionista. The children's models proposed in our master class are simple and universal, and detailed diagrams and descriptions for them will help even beginning craftswomen quickly knit an original item.

Delicate knitted summer blouse for girls

We will need:

  • thin yarn (100% acrylic) pale yellow – 200 grams;
  • cr. No. 4;
  • 4 buttons.

Size for ages 6-9 months.

Scheme

To create a fantasy pattern, we stick to cx. 1-3, finishing is carried out according to cx. 4.

Description

We knit with yarn folded into two threads.

Back and shelves

The children's blouse is knitted as one piece.

We dial a chain of 98 v. p. and follow the knot. according to cx. 1. Having reached high. 7 cm, we begin to work on the knot. according to cx. 2, adding 1 p. = 99 p. in the first row.

Having knitted another 10 cm, we move on to a new knot. (see diagram 3).

At the same time, at a height of 18 cm, use a contrasting thread to mark 24 stitches for the shelves and 51 stitches in the center for the back.

We continue knitting 24 stitches on the right side, after 6 cm from the armhole we close 4 stitches for the neckline and in every second row twice 2 stitches = 16 stitches. We finish the work at a height of 29 cm. Left floor. knits symmetrically to the right.

Now let's start knitting the back (set aside 51 stitches). At high product 29 cm, making 16 stitches on the shoulders and 19 stitches at the neckline, finishing.

Sleeves

We crochet a chain of 30 v. n. and by knot. according to cx. 1. At a height of 7 cm, we work according to diagram 2, decreasing 1 p. = 29 p. in the first row, and then adding 1 p. = 39 p. on both sides in every second row 5 times.

We end on high. 18 cm.

Assembly

We make seams, tie the product along the bottom (Fig. 4), floor. and the neck - using one row of s. without n., at the same time using this row to make buttonholes on the left side (1 st. without n., 3 v. p., skip 2 p.). We knit the first row of trim (diagram 4) and sew on the buttons. Children's summer knitted sweater ready for beginners!

A simple version of knitting a blouse for beginners: video mk

Openwork summer white blouse for beginners

We will need:

  • yarn (100% mercerized cotton, 200 grams per 663 meters);
  • cr. No. 2.5.

Dimensions

Height: 86 (98, 110/112, 134) cm.

Chest: 56 (62, 70, 76) cm.

Length: 27 (30, 36, 40) cm.

Sleeves: 11 (12, 16, 18) cm.

Density: rapport width = 3.5 cm, 12 r. = 10 cm.

Scheme

Description

We carry out the work starting from the shoulder and down.

Back

We crochet 76 (88, 100, 112) stitches. p. in a chain. We knit according to cx. 1 (6 (7, 8, 9)

rapportov skh.). Repeat 3-4 pp. cx. up to high 13 (14, 15, 16) cm, finish the 4th row..

We add one more rapport on both sides (see diagram 2).

Shelves

For the right one we crochet 28 v. p. in a chain. We knit 1-4 rr. according to cx. 1. Next we make approx. from the neck side along cx. 3, leave the fabric flat near the armholes.

Having knitted 13 (14, 15, 16) cm, add one repeat (see diagram 2).

We continue knitting with increases on the neck side for another 3 (2, 5, 4) cm, then an even fabric along cx. 1.

Having reached a height of 27 (30, 36, 40) cm, we finish the 4th row cx. and we finish.

Left floor knits symmetrically to the right.

Sleeve

We collect 88 (100, 100, 112) stitches in the chain. We work according to cx. 1 15 (16, 20, 22) cm, end with the 4th row. cx. and finish the job. The second sleeve is knitted similarly to the first.

Assembly

We sew the shoulders, shelves, sew in the sleeves, make the seams of the sleeves. We tie the shelves and neck with. without n. in 2 rows.

We knit 2 chains from... items 25 cm long and sew them to the edges of the shelves as a tie. Children's summer knitted blouse for beginners is ready!

Summer openwork jacket for girls with a round yoke: MK for beginners

We will need:

  • thin yarn (100% acrylic, 50 grams per 110 meters), about 80 grams of light green and 10 grams. white;
  • 5 buttons;
  • 1 meter of white satin ribbon;
  • cr. No. 2.5.

Size for ages 0-3 months.

Main pattern 1: knit with. s n., replacing the 1st s. s n. each r. three in. p.p..

Main pattern 2: the number of p. is a multiple of two. We knit according to the scheme, replacing the 1st s. s n. each r. at 3 in. p.p.. Repeat 1-2 pp..

Finish:*2 ss., 1 in. p. and 1 ss. from the 2nd ss., linked earlier*, from* to *.

Holes for tape: 3rd century p.p., 1st century. p., skip 1 p. of the lower row, * 1 s. from N., 1st century. p., skip 1 p.*, from* to *, 1 s. with n..

Button loops: 1 p. without n., 2nd century. p., skip 1 p. of the lower row, 1 s. without n..

Density (pattern 2): 20 p. x 14 p. = 10 cm x 10 cm.

Scheme

Description for beginners

We start by cutting out the neckline.

Children's yoke

Using a light green thread and crochet we cast on 69 v. p., main pattern 1. To give the yoke a round shape, we make increments.

1 p.: 3 v. p.p., *2 s. s n. from 1 p., 1 p. from n.*, from * to * = 103 p..

2 rubles: no increase.

3 p.: 3 v. p.p., add 1 p., *3 s. with n., add 1 p.*, from * to *, 1 s. s n. = 129 p..

4 rubles: no increase.

5 p.: 3 v. p.p., 3 p. with n., add 1 p., *9 s. with n., add 1 p.*, from * to *, 4 s. s n. = 142 p..

6 p.: 3 c. p.p., 2 p. with n., add 1 p., * 8 s. with n., add 1 p.*, from * to *, 3 s. s n. = 158 p..

7 rubles: no increase.

Back and front shelves

On the wrong side of the work, we crochet the front and back flaps together with the main pattern 2 as follows: 23 stitches left. p. sp., leave 34 p. for the sleeve, wire. 44 stitches for the front, leave 34 stitches for the sleeve and knit the remaining 23 stitches = 90 stitches. After 14 cm from the yoke, we finish the work, then 1 row with. with n..

Assembly

We crochet the neckline with a white thread, making holes for the ribbon, then the edges of the back shelves 3 p. With. without n., performing on the right p. sp. 5 p. for buttons.

We also tie the sleeves and the product along the bottom 1 r. With. without n. and 1 rub. finishing (see above).

Sew on the buttons and thread them through satin ribbon along the edge of the neckline. That's all - a children's summer knitted blouse for beginners is ready to delight its little owner!

Openwork children's blouse: detailed video MK

Have even stitches and enjoy your knitting!

Even those who are just starting to crochet can knit this crocheted blouse. You can knit a blouse from yarn of any color. In our case, acrylic yarn was used of blue color, but you can also use yarn to crochet this baby blouse Pink colour, and light green, and red - any!

Regarding the composition of the yarn, give preference to acrylic, since it does not cause allergies, and in terms of thermal properties it is in no way inferior to wool yarn. This blouse is suitable for both boys and girls, because there are no fundamental distinctive features in the clasp. Our description contains data that corresponds to a knitted blouse for a child aged from one year to one and a half to two years. If you want to knit a blouse bigger size, first calculate the loops in accordance with subsequent decreases in the armhole and neck area for the front and back parts and increases for the sleeve parts.

Children's knitted blouse for 12-18 months (1 year - 1.5 years)

Crochet baby blouses: materials for knitting

Take 150 grams of medium thickness acrylic yarn of any color

Select the hook number according to the thickness of the yarn. We have a hook with a diameter of 1.5 and 2 mm.

When knitting a blouse for a 1-year-old child, you need to be able to make the following types of loops:

  • Air loop and chain of air loops (you can find out how to perform a chain of air loops here)
  • Single crochet
  • Double crochet
  • Embossed double crochet (same as concave double crochet)
  • Embossed double crochet, purl (same as convex double crochet)

Using these types of loops, ordered in a certain way, you can get a knitting pattern for a relief elastic band (shown in diagram No. 1) and the main pattern for knitting our children's blouse (see diagram No. 2).

Knitting density of a children's blouse

Before starting knitting, knit test samples according to the indicated patterns. Count the number of loops per 10 cm in length. You should have 20 loops. If you get more, then take a hook of a slightly smaller number, if less, then a slightly larger one and knit the test samples again.

Crochet children's blouses with description

Crochet children's blouses: back detail

Take the thinner hook and use it to make a chain of 60 air. loops Knit these loops for 5 cm with a pattern according to the first pattern (this will be an elastic band consisting of relief columns). After this, we take a thicker hook and knit it with the main pattern, that is, according to the second pattern. We knit this way for 20 cm and in order to make recesses for the armholes we close 4 loops on each edge and continue to knit further as before. When the child's back detail knitted blouse will be equal to 37 cm from what was dialed at the very beginning air chain, then we finish and move on to knitting the front part of the blouse.

Crochet baby blouses: front detail

We crochet the front of the baby's blouse in the same way as the back. In the same way, upon reaching a height of 25 cm from the start of knitting, we close the loops to form recesses for the armholes and continue knitting further in exactly the same pattern. The difference in execution with the back will be the presence of a cut on the front. For this, at the same height as when forming the recesses for the armholes (that is, at a height of 25 cm from the beginning of crocheting the front of the children's blouse), close 4 loops in the center. As a result, our front part will be divided into two equal parts. We will knit these parts equally for another 10 cm. Upon reaching a height equal to 35 cm from the start of work on the front part, to form a neckline on each half from the side of the cut, cast off 2 times 5 stitches in each row. When the front part is equal to the height of the back part, that is, 37 cm, we finish knitting and move on to knitting the sleeves.

Crochet children's blouses: detail Sleeves

Again, we begin to knit with a thinner crochet, making a chain of 40 air loops and knitting it 4 cm with a relief pattern according to pattern No. 1. After this, we continue knitting with the main pattern according to pattern No. 2 with a thicker crochet hook. At the same time, we perform extensions, adding, starting from the 2nd row, in every 4th row 4 times 1 stitch. When the sleeve height of a knitted children's blouse reaches 25 cm from the start of knitting, we knit another 2 cm straight and upon reaching 27 cm from the start of knitting, we finish knitting the sleeve and proceed to knitting the second sleeve, which we will knit similarly to the first.

Sewing the details of a crocheted baby blouse

First we sew the front and back parts. After this, we sew seams on each sleeve and sew the sleeves into the armholes.

We knit a placket along the edge of the front cut

We take a thinner hook, insert it into the loops along the edge of the cut and, picking up all the loops, knit 2 cm with a relief pattern in accordance with diagram No. 1. We make strips along the edge of the cut on both sides. Sew the bottom edges of the strips, placing the right side strip over the left side strip.

Knitting a collar

Using a thinner hook, we pick up all the loops along the edge of the neckline (there should be 56 loops) and knit with a relief pattern according to pattern No. 1 until the height of the collar is 10 cm. We tie the fastener strips and the collar by making 1 row with single crochets.