Kanzashi heart from satin ribbon. DIY heart from satin ribbons Heart from ribbons

January is already coming to an end and soon the beloved holiday of lovers “Valentine's Day” will come to us all. One of the symbols of this holiday is, of course, the heart. On this occasion, I present to you a master class of hanging hearts from satin ribbons do it yourself, which can be presented to the second half. And it can also be used as a decoration for the home and thereby create a romantic atmosphere.

To create a heart from satin ribbons, we need the following materials:

  • thick cardboard;
  • pencil;
  • scissors;
  • stationery knife;
  • pink satin ribbon 2 cm wide;
  • thin pink satin ribbon 0.6 cm wide;
  • flowers are white;
  • pink roses;
  • halves of beads are mother-of-pearl white;
  • lighter;
  • glue gun;
  • thread with a needle.

How to make a heart from satin ribbons with your own hands?

On a sheet of cardboard, draw a heart with a pencil. To make it clearer what size you should get it, we enclose it in a square whose sides are 12 cm.

Cut out the heart with a utility knife. We must put the cardboard on some kind of substrate (for example, a wooden board) in order not to damage the surface of the table.

We take a pink satin ribbon 2 cm wide and glue one edge of the ribbon to the cut out heart with a glue gun. We wrap it completely with tape, then cut off the edge and fix it with glue.

Attach white flowers on top. In this case, they are on a wire with which you can fix them on the heart. If you have other flowers, then glue them with glue.

We divide a thin satin ribbon into five segments, 16 cm long. Next, cut off another piece of ribbon 25 cm long, fold it in half and tie it so that we get a loop. We process all edges with a lighter.

First, we tie a loop to the top of the heart in the middle, tie the edges to a bow. We also tie the remaining ribbons into bows, distributing them throughout the heart (the distance between the ribbons is about 2.5 cm).

We divide a pink satin ribbon 2 cm wide into segments 10 cm long. For work, you will need 12 such segments. We process the edges with a lighter so that the fabric does not crumble.

We turn the segment in half in width and sew along the edge with a basting seam.

We tighten the tape with an accordion so that it takes the shape of a flower

and sew the free edges together.

Glue the resulting flowers from the ribbon onto the heart.

Alternating glue roses on top of the flowers

and half beads.

So the handicraft heart made of satin ribbons with your own hands is ready !!!

In conclusion, I want to wish everyone love and happiness!!!

Lena Novikova

Master class on the topic:

"Heart for loved ones".

So, for us to work would need:

1. Red cardboard, a sheet of white paper,

2. Scissors, glue gun, wire cutters,

3. Artificial flowers, beads, hearts,

4. Copper wire 2pcs 50cm.

5. Satin ribbons white and red.

First, cut out a template from white paper, transfer it to red cardboard 3 times.

Cut out three heart.


Add up hearts in half, red side inward.

We fold the wire together and bend in half. We twist the middle of the wire, leaving a loop for ribbons.


The result was a workpiece similar to umbrella: on top there is a loop and four "antennae" - ribs.


We wrap three antennae of wire with white satin ribbon, and glue at the end so that they do not bloom.


hearts we glue together like a trihedral flashlight, passing a bare wire in the center. Mustache wrapped tape, direct between the red edges heart. We twist all the wires together into one bundle. We bite off the excess wire with wire cutters, and on one, we string a bead and fix it.


Glue on the ribs heart beads or hearts.

(Note: If not winding the wire tendrils tape, you can string beads on them.)


We decorate the crown heart artificial flowers ribbons, beads.

If you think that the kanzashi technique is very complicated and beyond your control, you are mistaken! After reviewing, you will understand that there is nothing complicated in this technique!

To create such a gift you will need:

  • light pink satin ribbon with a width of at least 50 mm;
  • lilac felt;
  • scissors;
  • glue gun;
  • lighter;
  • rhinestones in two sizes: 3 and 6 mm.

How to make a kanzashi heart from a satin ribbon with your own hands

To get started, you need to make squares with sides 5x5 from the tape. In total, 19 pieces of such parts will be required.

Now you need to take the squares one by one and make petals out of them for the future Valentine.


The square should be bent in half, guided by two corners of opposite sides. The result is a triangle.

The side with the fold should be left untouched, and the two edges from the cut should be folded into small folds.


The cuts turned out to be slightly uneven, so they need to be leveled by cutting with scissors. The resulting edge must be immediately treated with fire in order to melt and solder the folds of the tape together and the petal does not crumble.


It remains to straighten the petal a little and it is ready.


Repeating the entire sequence of making this petal, you need to make the same details from the remaining 18 squares.


Now you can glue the petals in the heart. First, two petals should be glued together, applying glue to the sides.


The third petal must be attached, slightly overlapping the previous ones, covering the place of their gluing. As a result, a workpiece in the shape of a triangle was obtained from the parts.

In the third row, you need to attach three parts, placing them in a straight line. The place of soldering of each petal must be glued to the underside of the parts of the previous row.


In the fourth row, you need to attach 4 petals, making them a smooth edge on the entire workpiece.


In the fifth row, 5 parts should be fixed, increasing the size of the workpiece with them.


It turned out a large triangular blank, now from the remaining 4 petals it is necessary to give it the shape of a heart. To do this, you need to take two petals and attach them on one side of the triangle, and fix the remaining two parts on the other side of the workpiece, the middle will remain unfilled. The result is a neat heart.


According to the size of the resulting blank, it is necessary to cut out a heart from lilac felt.


The resulting piece of felt should be carefully greased with glue and attached to the wrong side of the heart of rose petals.

It remains to decorate the resulting heart. This will require rhinestones of two sizes. Rhinestones should be glued along the edge of the heart, always alternating large and small.


The result is beautiful valentine, made in the technique of kanzashi, which will surely please loved ones!

Valentine's Day is a great occasion to say nice words love among the winter blizzard and cold. A bright gift can be a big one with delicate flowers from a satin ribbon. You can make it with your own hands, because with detailed instructions from the site "KnowKak.ru" it will be very simple.

Scroll necessary materials:

  • foam heart figure;
  • red satin ribbon;
  • needle with red thread, iron;
  • glue gun, scissors.

Master class on making a scarlet heart:

Step 1. You will need a 7 cm wide satin ribbon. If you don’t have one, then you can replace it with a red fabric. In this case, cut it into strips 7 cm wide.

Cut the ribbon 40 cm long. The satin ribbon, like the material, has a front and wrong side. Fold the strip along. In this case, the front part of the tape should be on top (it is more shiny). To keep the workpiece in shape, iron the fold line with an iron.

Step 2 Sew the loose sides of the ribbon seam first. As you sew, tighten the material. If this is not done, then the petals of the flower will not be voluminous. You will get such a preparation.

Step 3 The stitched strip must be folded into a bud. Try to twist the lower part (the one that is sewn) as tightly as possible, and straighten the upper part of the workpiece (along the fold line) in the form of petals. To prevent the bud from opening, fix the tapes every 2-3 cm with hot glue.

Sew the bottom of the flower and pull off the thread. So the bud will open even more.

Step 4 In a similar way, make all the flowers from the ribbon. You can use not only red for buds, but also “dilute” it with pink or burgundy. The number of blanks will depend on the size of the foam base.

Step 5 Glue the finished flowers to the foam. First place the blanks in the center of the heart, then glue on the sides. Try to place the buds close to each other so that the base is not visible.

If you don't have styrofoam, you can use cardboard. But on top of the cardboard heart, you need to make semicircular sides 4 cm high. Glue them from plain paper and leave to dry.

Step 6 On the reverse side, fasten the tape in the form of an eyelet.

You don't need a reason or a means to express your feelings. However, often you really want to please your loved ones with some kind of gift. An easy-to-make, delicate, airy heart made of satin ribbons can become a wonderful handmade valentine. I was inspired to create it by a heart of fresh roses.

Materials and tools used to make a heart:

  • hot pink satin ribbon (5 cm wide, 4.10 m long)
  • pale pink satin ribbon (5 cm wide, 3 m long)
  • pale pink satin ribbon for decor (1 cm wide, 0.5 m long)
  • pearl-like beads
  • threads in tone
  • scissors

Cut hot pink and pale pink ribbons into 15 cm long pieces. Each piece of ribbon will be a separate flower.

To form a flower, you need to fold the pieces of ribbon in half along the long side, sweep one side seam and the ends of the ribbon, then pull it off.

Then you should slightly correct the resulting flower, give the petals an openness and fix it with a thread and a needle.

After the required number of flowers has been made (28 hot pink and 20 pale pink), we sew them in pairs. Get bows. Of these, we will collect a heart-valentine.

We form a heart from bows. Pale pink bows are neatly placed in the middle, and hot pink - on the sides. We sew the bows together through the middle and fix with threads.

We decorate the sides of the heart with a narrow pale pink ribbon.

From the remnants of the ribbon, we sew a loop so that the heart can be hung.

We decorate decorative tape pearl-like beads. Our beautiful heart is ready!

To share with friends:
Similar posts