Satin ribbon monkey. Ribbon monkey: how to create. Monkey Pillows

A ribbon monkey is a super cool souvenir and a gift for the New Year. Good afternoon, dear friends and visitors to our online magazine, today we will consider a master class on tape monkeys. Soon, very soon, winter will begin, and with it our favorite New Year holiday. According to the eastern calendar, this will be the year of the monkey. As you probably noticed, the masters have already begun to prepare for the long-awaited holiday and prepare all sorts of interesting souvenirs for the New Year. On our website, you can already find cute, cute monkeys that can become a wonderful gift for your beloved family and friends. Go to the section and there you will find a lot interesting ideas for the New Year. And now we will learn how to make a cute monkey from a satin ribbon, the author of this master class is Tatyana Pustovalova. The master class on monkeys turned out to be very informative and interesting.

To make a monkey you will need:
* Satin ribbon 0.6 mm. pink and Brown color.
* Satin ribbon 5 cm x 5 cm red, brown and Pink colour.
* Satin ribbon 4 cm by 4 cm brown.
* Felt color optional.
* Scissors.
* Adhesive optional.

How to make a monkey:
First we need to prepare individual parts and then we will connect them with you. The photo under the numbers is well written and shows what parts to do and why. For the manufacture of legs and arms, we use a satin ribbon of brown and pink, 0.6 mm wide. and 35 cm long. We collect it with an accordion and tighten it up to 4 cm. We string a pink blank on top. Thus, we make all the blanks that are described in the picture. To make a muzzle, we make round blanks with you. But when making a round petal, there is one little secret. After you have made round petals for the muzzle, cut off the tip again and “spread” the ends in different directions. Press with tweezers and singe - then the tip will be flat and wide))). And we cut off the pink petal harder - from the tip somewhere 5 mm. we retreat so that he does not speak strongly with us.
We also need to cut out a blank of a monkey from felt, and we will attach our parts to it.

Handles can be distributed in different directions.

We glue the finished ears in the right place. We roll the pink accordion in our hands into a spiral and glue it to the center of the tummy. And around the pink we glue a brown accordion.

We take a pink round petal and glue it on the glue as the author showed. We spread glue on the very tip, and leave the bottom free.

Around rose petal glue the brown accordion.

Raise the pink petal and glue a red double round petal a little under it. Glue is also applied to the very tip of the petal.

We glue the finished eyes to the place we need.

If it seems to you that the monkey is not so fluffy, then you can make another brown accordion 15 cm. We drag it up to 1.5 cm and glue it to the place we need. Everything, the satin ribbon monkey is ready.

Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and an active link to the site. 2019 All rights reserved.

Well, our dear needlewomen, are we starting to prepare for the New Year?)) Time, as usual, will fly by unnoticed, but there is still sooo much to do! Preparing New Year's souvenirs with the symbols of the coming year is already a real tradition! For those who are not yet in the know, the Fire Monkey is the symbol of 2016, so this huge Cross Stitch article will be devoted to creating monkeys with your own hands using a wide variety of needlework techniques!

This time I decided to deviate a little from the usual presentation of the material, namely detailed description the manufacturing process of each monkey. I have prepared for you a kind Guide to master classes posted online. Believe me, there are a lot of them! But there are already many times fewer good, interesting and high-quality ones. Having gone through literally everything, I personally chose, in my opinion, the most worthy, the best of the best!!! I present them to your attention)

In addition, here you will find links to the purchase of master classes, as well as ready-made monkeys handmade! This information is also very relevant on the eve of the New Year!

So, let's start with simple ones and gradually move on to more complex and interesting workshops by monkeys.

Monkeys made of paper and on paper

Drawing postcards with children

Children should definitely be involved in the preparation of New Year's souvenirs - let them do it with their own hands at least simple crafts with monkeys, for example, postcards. They will surely like the process, because in the course of work they will literally have to carry in the paint with their hands and feet)

To make a postcard with a monkey hanging on a vine, all you need is a sheet of paper and watercolors. Help your child paint 4 fingers and a hand with brown paint, and then let him leave a print of his pen on paper! The head and tail of the monkey can also be painted with paints.

And you can cut them out of colored paper:

From such simple elements you can add a cute muzzle of a monkey)

Option three

If there is no time to sew a monkey with arms and legs), then sew only the head, it is perfect as a keychain.

Option four

Such a monkey can be cut out of thick felt by gluing all the details together. It will be faster, and it will look just as worthy.

Option five

But you can sew such a monkey toy with your own hands if you purchase a pattern from its author (tilda4kids).

coffee monkeys

Do you already understand where I'm going? Of course, in addition to the fact that in a similar way you can make coffee monkeys that will fill the house with a wonderful aroma, and everyone who gets it will be in a great mood!

These are the mischievous coffee monkeys you can buy

Monkey Pillows

Another good idea is sew a pillow in the form of a monkey. There are many options, as they say, choose to your taste. With us - ideas for inspiration!

.

Buy a master class on knitted potholders"Baby Monkeys" is offered by Svetlana Zabelina.

Hot stand

A hot stand is also in the form of a monkey muzzle) Description of knitting.

Mitten

The pot holder can be used simply as a kitchen decoration or for its intended purpose. It knits like this.

Amigurumi toys are always in great demand. Therefore, choose a master class, knit, and then give hand-made monkeys to your beloved friends and family.

You can see how this monkey looks “live” in the video from Marusya Prokopenko:

Option six

Button & Company shares a master class on knitting such funny monkeys)

To make a beautiful do-it-yourself monkey hairpin we need:

  • 1 cm wide grosgrain ribbon in brown, gray and yellow
  • crocodile hairpin base
  • plastic eyes
  • thermal gun
  • scissors

Do-it-yourself monkey hairpin for the new year - a master class with a photo:

We cut off from the yellow ribbon a segment according to the size of the base for the hairpin + allowances for bends on both sides.


We glue the tape to the base with hot glue, first on one side.


Next, apply glue to the top of the base and apply the tape, pressing firmly with your fingers.


Apply hot glue to the inside of the base.


We tuck the tape and glue it on hot glue. Thus, we paste over the entire upper part of the base.


As a result, you should get such a blank for a hairpin - already beautiful and bright.


The next stage is the manufacture of the monkey itself. In the work we will use brown and gray rep ribbon.
Take a brown ribbon and roll it into a small circle, fix the end of the ribbon with hot glue.


Next, we fold another circle, but already in a smaller size - we get a figure in the form of the number eight.


Now take a gray tape and roll it into a circle of small diameter and fix the end of the tape with glue.


After that, around a small circle, we make another turn, but already a little larger in size and also fix it with hot glue.


Next, we make the third turn a little larger than the second and the last fourth turn, after which we cut off the excess tape and fix the end with hot glue.


We place the finished blank from the circles in the large lower circle of the "eight" and fix it on hot glue, firmly pressing it with our fingers so that the parts are well fastened together.


For the upper circle of the “eight”, we create only one circle of a smaller diameter from a gray tape and also glue it inside it with glue.


From a brown ribbon, cut two strips of 15 cm each for the monkey's eyelids.


We twist both strips into tight rolls, fix the ends with hot glue.


For the ears, we cut two brown strips 7 cm long each and two gray strips 5.5 cm long each.


Roll into circles and glue together.


We place the gray circles in brown ones and fasten them together with hot glue.


We place the eyelids in the upper circle, gluing them to the base with hot glue.


Glue the ears on the sides, giving the head a monkey shape.


Glue plastic eyes on the lower part of the eyelids.


From a thin satin ribbon we tie a small bow and glue it near the monkey's ear.


Well, all the basic hairpins are ready, it remains to connect them together.


To do this, apply hot glue to the crocodile hairpin and glue it to our monkey. We are waiting for the glue to dry, after which you can use a beautiful and bright hairpin for its intended purpose. hand made monkey New Year ready!


Let your little ones be the most charming and fashionable.

In this article, we will look at how a wicker monkey is created. It is not difficult to make a template for it, and further we will tell you how. Souvenir, embodied with your own hands, will become an ornament in New Year's interior. Creating such crafts will bring a lot of joy to children and mothers. A ribbon monkey is a great gift for family and friends. When creating this baby, invest positive emotions, and let her bring a lot of joy to the house.

materials

So, as a result, we should get a monkey. You cannot create a template without special materials. To make a monkey you will need: satin ribbon, felt, you can take the one that is available, its color is not important, scissors, glue, ruler.

Instruction

Let's move on to the practical part of solving the question of how a monkey is created from satin ribbons. Let's create separately blanks for each part of the monkey's body, it should turn out: two tummies of brown and pink color, tail, head, 2 arms, 2 palms, 2 legs, 2 feet, 2 ears, 3 parts of the muzzle. Thanks to these blanks, a ribbon monkey will soon be created.

Let's move on to the next step. To create the legs and handles, you need to prepare a brown ribbon. Its dimensions are: width - 6 cm, length - 35 cm. We collect the tape into an accordion and tighten it to a size of 4 cm. You get one leg or one handle, you need to make three more such blanks of the same size. The lower part of the pink color is attached to the resulting blanks. For its manufacture, a tape is taken with a width of 6 cm, a length of 13 cm. We tighten it with an accordion to make a blank 1.5 cm in size.

Union

Our ribbon monkey should be solid. We connect brown blanks for handles and legs with pink. We carry out the muzzle of a monkey from two parts. These two elements should take the form of round petals. To get the detail correct form, exactly the one that is needed to form the head, you need to cut off the small end from the brown petal and spread the tips in different directions. Singe the cut part so that it becomes flat and wide. Cut off the pink part ready product it should turn out to be 5 cm in size. We make the ears from a brown ribbon, in finished form their size is 4x4 cm. Our ribbon monkey has a felt base. We create it. All tape elements will be attached to it. Dimensions for the base: head diameter - 3 cm; the height of the pear-shaped body is 4 cm, the width of the lower semicircular part is 3 cm. The length of the legs and arms is 4 cm. The size of the tail is at your discretion.

Algorithm

All the details are prepared, we are assembling the New Year's souvenir. It is necessary to have two identical felt blanks. We attach the legs and tail to the first part, after attaching ready-made ribbons to them. We apply a thin adhesive material on their base and fasten brown ribbons, and pink ones for the foot. Then we connect exactly two bases, apply carefully so that their edges match. On the side that will serve as the front, we fasten the finished handles. They can be attached different ways, for example, so that they dangle below or stick out to the sides, calling for hugs. Glue the round ears to the felt head. For the tummy, we roll up a pink accordion tape in a spiral, apply glue to the felt in the center of the body and apply the pink part. We attach a brown ribbon around the resulting pink area.

The implementation of the muzzle must be taken responsibly, because this is a face, it should turn out pretty. We apply the pink part of the muzzle in the center of the head and attach only the upper part to the felt, leaving the lower part free. We attach a brown accordion around the pink petal. We apply a double red petal to the free side of the pink muzzle and fasten it so that we get a mouth. On the outside of the red petal, we apply and carefully glue the brown petal. Roth is ready. New Year's monkey left to mark the eyes. It is necessary to outline the place where you need to stick the eyes. They can be cut out of felt, but it will be more interesting when the eyes are “live”, this option can be bought in special stores. The monkey is ready, you can put it under the Christmas tree or attach it as Christmas decorations. By giving such an interesting souvenir to your loved ones, you can cheer up. Now you know how to weave an amazing animal from ribbons.