The best single-phase gel polishes. How to apply single phase gel polish? Means single phase gel polish

Gel nail polish is very popular. But many representatives of the fair sex refuse this type of manicure due to some complexity of its implementation, and also due to the fact that such a procedure takes a lot of time. But now that there is a special single-phase gel polish on sale, you can safely forget about these shortcomings.

What it is

As a rule, a manicure using gel polish takes place in three stages, but using a single-phase coating, you can perform a manicure much easier and faster. This means that a single-phase gel polish combines the functions of a base, a fixer and the color coating itself. Now it is enough just to apply one or maximum two layers of this product on the nails and the manicure is considered complete. In addition, such a coating for nails is safer.

Single phase gel polish has unique composition and formula. It combines several components at once, which are included in the usual basis for gel polish, its fixative, as well as color pigment. That is why its use allows you to immediately replace three familiar means for creating a manicure using gel polish or shellac.

Performing a manicure using this particular coating, you can not only get a chic nail design, but also significantly reduce the time for its implementation, as well as save on the procedure itself.

But besides ease of use, this tool has other obvious advantages.

Advantages

If we talk about the merits of this new gel manicure tool, there are a lot of them. The most basic are the following:

Acceleration of manicure and its simplification. Now, instead of three jars with the necessary funds, only one should be used.
On the surface of the nails, such a coating will lie in a thin layer, which means that the nails will be able to breathe. In addition, a manicure made using such a single-phase varnish will look more natural.
You can save a lot. The cost of a single-phase gel polish is several times less than the total cost of the three conventional products that it replaces.
Such a coating for nails, despite the smaller thickness of the layer, can stay on the nails longer than the usual gel polish. On average, the durability of such a manicure can last up to 4 weeks. But it will be correct to remove the single-phase gel polish from the surface of the nail bed after 15 days, since the nails will grow during this time, and their regrown edge will not make the best impression.
You can dry this product not only in an ultraviolet lamp, but also in an LED lamp. And this method of polymerization is not suitable for all conventional gel polishes.
You can cover with such a tool not only your own natural nails, but also extended.
And one more indisputable advantage this tool is saving working space during manicure. There is no need to set several bubbles on the table, one will replace them all. This is especially true for manicure masters, whose working surface is always significantly crowded anyway.
All varieties of such single-phase funds sold today can be used by combining with each other. For example, you can paint a nail with one color, and create various patterns on its surface with any other.

Since its first appearance on the shelves, this nail coating has immediately fallen in love with many women. Therefore, manufacturers hastened to please them with a wide range.

Varieties

Today on sale there are single-phase gel polishes from various manufacturers. But the entire range of this tool can be divided into two large groups:

Colored gel polishes. They are the most popular, as they allow you to create a bright, beautiful manicure for every taste.
Transparent gel polish. It is used as a base coat before drawing, and some prefer to use it as a hardener for the nail plates, as well as to create a simple and discreet manicure.

Such a 3 in 1 tool is ideal for absolutely all women, without exception. A wide color palette, as well as the ability to create a transparent manicure, allow you to create nail art for every taste and every occasion. In addition, regardless of the variety, all single-phase gel polishes are simple, convenient and economical to use.

After it became clear that this novelty in manicure was in demand, many manufacturers hurried to provide their products to customers.

Firms

In order to fully appreciate the advantages of this single-phase gel polish on your nails, you need to purchase products from reliable manufacturers. Therefore, first of all, it is necessary to carefully study the products of such companies as:

Iris. This brand is engaged in the production of high-quality gel polishes of two series: "GelLack 3v" and "Gel Polish One Step". Both coatings are evenly applied to the nails, dry quickly, do not stick and have high resistance. Single-phase products from the first series are presented in 60 shades and are sold in a volume of 18 ml. The coating from the second series has only 20 different shades, and is sold in 6 ml vials.
Masura presents its customers with the opportunity to purchase high-quality single-phase gel polish. The main palette consists of red and pink tones. The products of this company differ from analogues not only in their colors and durability, but also in their very low cost. It is the gel polishes of this brand that are the most budgetary.
Giorgio Capachini makes it possible to appreciate the high quality of its products in the form of 60 different colors of gel polish. Despite the small volume of the tube - only 6 ml, it is enough for at least 20 manicure procedures. Distinctive feature single-phase gel polishes of this brand is the drying time. On average, it is 4 minutes. "One Step" is highly durable. In an unchanged form, gel polish can remain on the nails for three weeks.
Bluesky. This brand has the widest range of single phase gel polishes on the market. It includes 4 series of products, in total they contain more than 120 shades of coverage, including acid color, which is key feature this product. Absolutely all gel polishes are characterized by high quality, low price, and most importantly, the absence of harmful chemical components.
Yoko. The absence of a sticky layer, ease and cost-effectiveness in use, a wide color palette and high durability - this is exactly what characterizes the products of this company.
Joy Brand allows its customers to purchase high-quality single-phase gel polish, which has not only a bright, rich and deep color, but also a high level of durability. In addition to a wide palette of shades, this manufacturer also boasts that the gel polishes of its production actively strengthen the nail plate, eliminate its fragility, and also eliminate delamination.
High-quality single-phase varnishes at an affordable price are also produced by the brand Koto. Among the product range of this company, you can find both a matte finish and with a pearlescent sheen or large sequins of various colors.
Milv. This brand is engaged in the production of high-quality coatings for nails. The products of this company are one of the most popular. And all thanks to a wide range of shades and economical consumption of funds.

This is far from full list reliable manufacturers of single-phase gel polishes. It is also worth paying attention to brands such as Just Gel IBD, GelColor OPI, Harmony Gelish and Jessica. Their products are distinguished not only by high quality, safe composition, durability, a wide palette of shades, but also by a rather high cost. In addition, the range of shades of gel polishes from these manufacturers is constantly updated.

But sometimes it's not enough just to buy gel polish good manufacturer, it is also necessary to apply it correctly.

How to apply

In order for the result of using a single-phase gel polish not to bring disappointment, you need to learn how to use it correctly. The step-by-step technique for using single-phase gel polish is as follows:

Preparing the fingertips and nail plate. First of all, it is necessary to remove the cuticle or move it as far as possible, if selected. unedged manicure. Then, with the help of a file, the desired shape and length of the nail itself is formed.
Be sure to polish the entire surface of the nails. To do this, you need to use a special tool - a buff. It is a thick soft file.
If the use of a degreaser when using a three-phase gel polish is an optional item, then using a single-phase coating, its use is mandatory.
Then be sure to cover the entire nail plate with a primer. it special remedy, which provides a dense and reliable bonding of the gel to the surface of the marigold. In addition, the use of this product helps to avoid the appearance of such defects as cracking and peeling of the gel polish from the surface of the nail plate in the future.
Now you need to apply the single-phase agent itself to the nails. It should be remembered that such a gel polish is applied in a very thin layer on the surface. Press the brush firmly against the nail. The product is applied to each nail in turn, with obligatory drying in an ultraviolet lamp for 2 minutes or in an LED lamp for 30 seconds.
If necessary, after drying, another thin layer of coating can be applied to the surface of the nails. This is done to get a more saturated deep color. If the desired shade has not been obtained, it is not recommended to apply a third layer. The nails will not be able to get the right dose of oxygen, and the coating itself will begin to peel off from their surface faster.

For information on how to properly apply and remove single-phase gel polish, see the following video.

When drying a single-phase gel polish in a lamp, be sure to read the manufacturer's recommendations on the time for this procedure. Depending on the brand chosen, the drying time can vary significantly. And non-compliance with the recommendations can lead to the appearance of various flaws.

But no matter how durable and high-quality the nail coating using a single-phase product is, sooner or later it will need to be removed. But this must be done, also following some recommendations.

How to remove the cover

In order not to damage the structure of the nails, as well as to remove single-phase gel polish from their surface as quickly and simply as possible, the following steps must be performed:

It is necessary to stock up on food foil, wooden manicure sticks, ordinary cotton wool. You will also need a cleanser, it can be purchased immediately complete with the selected single-phase gel polish, or you can buy it separately. If it is impossible to choose a product designed to remove exactly gel polish, then a regular nail polish remover made on the basis of acetone is quite suitable.
Cotton swabs are abundantly soaked in solution and pressed tightly against the nails. There is a small nuance here: the shorter their length, the easier it is to remove the coating from them. Therefore, if necessary and possible, it is first necessary to shorten the nails with nail scissors.
Then the swab attached to the nail is tightly wrapped on top with ordinary foil. If it is not at hand, then ordinary cling film is quite suitable.
In this position, the hands are left for 10 or 15 minutes, then the compress is removed from the fingertips.
With the help of an orange stick, the coating is lifted up at the base of the nail, if it is easily amenable to this procedure, and with the help of a stick it is shifted at the top. Then completely clean off the nail. If after the expiration of time the gel polish has not softened, then a compress is applied to the nails again and left for another 15 minutes.
After completely removing the coating, the nails should be thoroughly rinsed in warm water and applied to them. nutritious cream or special oil.
Even though a single-phase gel polish may not cause much damage to the nails, they need to be given a break. That's why before performing the next manicure using this tool, at least a day must pass.

A beautiful manicure is loved by all women without exception. With cool nail art, the handles become even more attractive, feminine and well-groomed. Permanent coatings appeared on the market of nail products not so long ago, but immediately brought the beautiful half of humanity into indescribable delight. Shellac, gel polish, biogel - these compounds gave women a beautiful, bright and rich manicure that lasts up to three weeks on nails.

The first techniques were not available for home application, but manufacturers did not leave this issue unattended. Technique is constantly being simplified. Now a permanent manicure can be done not only in the salon with professionals, but also at home with all the necessary paraphernalia. Today we will tell you about single-phase gel polish, all its disadvantages and advantages, and also bring to your attention step by step instructions correct application.

What is the difference between single-phase gel polishes and three-phase ones?

The permanent coatings familiar to us, which are usually used in salons, are three-phase. The technique of their application is quite complicated. As the name implies, you need to apply the coating in three phases: base, base color and top. This is a rather lengthy procedure.

Single-phase gel polish is a novelty in the nail products market. According to the manufacturers, one bottle already has everything you need for a flawless manicure. They have a completely different, improved composition. That is, it is not required to apply a base and cover with a top coat. At the same time, the durability of the manicure and its brightness are no different from the three-phase counterpart.

Step-by-step application instructions

If you are tormented by doubts whether you can make yourself as neat, beautiful manicure as in the salon, then we suggest that you carefully study detailed instructions. We will tell you how to properly apply single-phase gel polishes, what you need for this.

Manicure starts with the usual procedures. Remove the old coating, give the nails the desired length and shape.
Treat your nails with a 800 grit manicure buff, carefully removing the top layer.
Moisten a cotton pad with a degreaser and wipe the nails thoroughly. If you do not use it, then the coating will lie unevenly and will not hold well.
Gently push back the cuticle with a pusher. You can use a plastic or metal tool.
Carefully painting over the nail plate and especially its tips, apply the first layer of gel polish. Try not to touch the cuticle and periungual roller.
Dry the varnish in a LED or UV lamp. In the first case - 1 minute, in the second - about two.
Push back the cuticles again before applying the second coat for a flawless manicure.
Just as carefully, paying attention to the tips, apply a second layer.
Use the lamp again.

A beautiful and durable permanent manicure is ready, it remains only to apply a special oil to the cuticle to soothe and soften it. As you can see, applying a single-phase coating is quite simple, which means that you will do an excellent job with this task. We encourage you to add to your knowledge. step by step video, where you will find a visual demonstration of the described technique for applying single-phase gel polish.

Advantages of single-phase gel polishes

It can be said without exaggeration that single-phase gel polish has become a real salvation for those who like to get a good result and not spend too much time on it. The technique of applying it is extremely simple, so you can do without visiting the salon. Other benefits include the following.

Saving time. According to the technology, it is required to apply only two layers of the main color, which reduces the time spent on manicure by half, compared with three-phase coatings.
Saving money. Instead of three funds, you need to purchase only one.
The three-phase coating is very dense, prevents the nail plate from breathing, dehydrates and dries it. Single-phase coating has a lower density, which has a positive effect on appearance nails.

Here you can add ease of application, perfectly even, durable coating and incredible richness of colors. Such a manicure will become a worthy decoration of the pens and eliminate the need to often apply the usual decorative varnish.

Disadvantages of single-phase coatings

However, despite the obvious advantages, there are also disadvantages that you should be aware of when purchasing a single-phase gel polish.

Design limitation. The system does not provide for the application of a top coat, so there will be no sticky layer. Accordingly, decorate such a manicure with an unusual and stylish design very problematic.
Less durability. Despite the low cost, most manufacturers assure that the durability of the manicure does not suffer from this at all. But it's not. The application technique does not provide for the presence of a base and top coat, so the manicure will last less - no more than two weeks. In addition, if the nails are too flexible and long, the gel polish may crack.

Many people ask the question, is it possible to extend the life of a manicure by applying a top coat? You can answer it positively, as special top coats for single-phase gel polishes began to appear on sale. But if durability is so important to you, then it is better to give preference to a three-layer coating, which will definitely last longer.

For the sake of beauty, women are ready to make many sacrifices, but with modern cosmetics you won't need them. Now you can easily make a beautiful manicure that will last long enough without requiring frequent updates. You can use your usual three-phase gel polishes or purchase a new one-phase coating that costs less and takes less time. The choice is yours, experiment! As a conclusion, we invite you to look short video with an overview of RuNail single-phase gel polish.

The use of gel polishes in modern manicure has become a real breakthrough in the beauty industry. After all, this material not only allows you to create the perfect glossy shine on the nails, but is also able to withstand several weeks of wear. However, traditional gel polish involves the use of a base and top coat, which greatly complicates the procedure. That is why such a tool as a single-phase gel polish appeared on the market, the features of which you will learn in this article.

Single phase gel polish step technique drawing

What does single-phase gel polish mean?

Single-phase gel polish is a colored nail gel that does not require the use of additional adhesives - top and base. It contains photocells that allow the varnish to harden under the influence of a UV lamp. However, unlike the three-phase gel polish, which masters use in beauty salons, single-phase gel polish is much easier to apply at home. In addition, this tool no sticky layer, which means there is no need to use a clinser.

Despite the clear advantages of single-phase coating, it also has its drawbacks. So, for example, 3 in 1 gel polish is not suitable for leveling the nail plate and for use on thin and brittle nails. In this case, it is better to use a three-phase coating.

How to apply single phase gel polish

Step-by-step technique for applying single-phase gel polish

If you decide that a single-phase gel polish saves time and suits you completely, then carefully study the step-by-step instructions for applying it:

Make a hygienic manicure: remove the cuticle and glossy shine from the nail, give the nails the desired shape with a file.
For better adhesion of single-phase gel polish, treat the nail plate with a degreaser or alcohol. The primer in this case can not be used.
Apply the first coat of a single-phase coating on the nails and dry in a UV or LED lamp within 2 minutes. If the selected color does not have a high density, then a second and even a third layer will be required, each of which must be thoroughly dried.
Do not forget to seal the end and edges of the nail - this will contribute to a better preservation of the manicure for a long time.
Since single-phase gel polish does not have a sticky layer, the final step is to apply moisturizing oil to the cuticle.

To remove 3-in-1 gel polish, a special remover is used, which is also used when removing a three-phase coating. Before the procedure, do not forget to treat the nail plate with a soft buff, removing the glossy sheen.

What does single phase gel polish mean?

In order for a manicure with single-phase gel polish to please the eye for as long as possible, you should observe simple rules:

For the first 24 hours after application, refrain from going to the bathhouse and going to the sea;
Try to do all household chores with rubber gloves;
If the gel starts peeling off at the end of the nail, seal it with a top coat or regular clear polish.

To give preference to single-phase gel polish or not is a purely individual matter. In any case, every manicure lover should appreciate this interesting novelty!

Single phase gel polishesperfect for women who prefer to spend a minimum of time on personal care and at the same time remain beauties.

What is the difference between single-phase gel polish and three-phase

These coatings are a great alternative to three-phase shellacs . To make others admire your magnificent manicure, it is enough to cover your nails with one or two layers of the product and dry them in an ultraviolet or LED lamp. more economical, has a low operating temperature.

The absence of the need to use the base and finish allows you to reduce the time required for the procedure by half. In this case, the nails will not be painted in the color of the coating. great for creating a manicure at home.

Gel polish is removed as easily as its three-phase counterpart, but not at all like. To shellac managed to get wet, wrap your nails in sponges moistened with foil and leave for only 5-7 minutes.

Online store catalog FRENCHnails

Presented in directory single-phase coatings please:

high quality;
affordable price;
easy-to-apply consistency;
resilience;
hypoallergenicity.

In our online store you can cheap buy single phase gel polish TNL any colors. Palette includes delicate and vibrant shades, from feminine salmon, lavender pink and azure with mother-of-pearl to boldneon yellow and luxurious black with blue glitter.

Single-phase gel polish is one of the the best means for manicure, as it significantly reduces the application time and practically does not harm the health of nails.

How to use it correctly at home? What are the pros and cons of using a coating such as a single-phase gel polish?

Single-phase gel polish: what is this coating

Single-phase gel polish is a special gel with color pigment. It is applied in the same way as any other gel polish. To dry it properly UV required or LED lamp.

Single-phase varnish is simply applied in one or several layers.

Most often, two types of gel polishes are used today for manicure: single-phase and three-phase. Typically, a three-phase system is used in salons in the process of building. It includes three different means, each of which is used separately for a specific phase. This takes a lot of time. And also the cost of funds for three-phase application is quite high.

Professionals consider single-phase gel an excellent alternative to the standard three-phase system. What is the difference between a single-phase coating and a three-phase one? The use of a three-phase system usually requires a professional approach. Initially, a base is applied to the nail, then a layer of colored gel polish and, upon completion, a top coat.

About the pros and cons of 3-in-1 polishes

Benefits of Single Phase Coating

Disadvantages of 3-in-1 gel polishes

Such varnishes not suitable for all types of nails. For example, they are not suitable for weak, strongly bending nails.
When using this type of coating with stamping design or sliders and stickers will need apply an additional layer of top over stickers.

Application technology

Despite the fact that the coating is applied in one stage, special knowledge and skills are required. In addition to accuracy, a professional approach is also important here, which you can master by adopting a step-by-step application technology:

Before starting the procedure, arm yourself with a nail degreaser, directly with gel polish, a manicure set, an ultraviolet or LED lamp - depending on the marking of the varnish.
First fix natural nails: you need to give them the same shape, length, file, remove the cuticle, sand.
Before application degrease your nails with a special fluid.
Sometimes, for better adhesion of the gel polish to the nail plate, a special primer. This stage carries advisory nature, and you can skip it.
We cover the nail with a layer of gel polish.
Dry coating in an ultraviolet lamp follows for one and a half to two minutes. If you use an LED lamp, then drying will take less time. You can apply two coats if the gel polish is too transparent. Wherein do not forget to seal the sections of the nail plates using the same gel polish.
At the end it is necessary treat the cuticle oil specially designed for this.

Often there is advice: at the end of the manicure, apply a protective coating as a finish so that the single-phase gel polish holds well. In fact, these are just the tricks of manufacturers. A single-phase coating lasts perfectly for about two to three weeks without any protection.

Remove single phase gel polish very easy: enough remove the gloss with a buff and soak the coating in the remover.

You can learn how to apply and how to remove single-phase gel polishes by watching this video:

Overview of manufacturers of single-phase gel polishes

Bluesky is a product of the Chinese concern Guangzhou Bluesky Chemical Technology. Under this brand, the original Bluesky Shellac product is produced.

To work with this coating, you need an ultraviolet lamp with a power of 36 kW or an LED lamp. The manufacturer's description says that single-phase Bluesky lasts about 14 days.

CNI- products for nails from the corporation of the same name. The brand is distinguished by a variety of colors. These are durable and easy-to-use gel polishes that last up to 20 days. One coat of CNI is sufficient for dense coverage. It is an excellent protection against the harmful effects of the environment.

IRISK- gel polishes from a Russian company that sells everything you need for a nail service, as well as for eyelash extensions. Stay on nails for up to 14 days. The palette of single-phase gel polishes from IRISK is very diverse. In terms of properties and composition, it practically does not differ from the world famous Shellac..

Masura- single-phase coatings from the same name Russian brand, which manufactures products for the nail service, as well as for the care of the skin of the hands and feet. The collection of Masura tones is replenished almost every month. Traditionally, gel polish stays on nails for 14 days. When using varnishes of this manufacturer should previously apply the base of the same name under single-phase varnishes, since it is not easy to remove gel polish from the nail plate.

RuNail– gel polishes from a brand included in the top eight the best manufacturers. It has a low price, while it in no way affects the quality of the coating. Ideal for both salon and home use.

Giorgio Capachini- Single-phase coating that lasts up to two weeks with the possibility of adjustment during wear up to 4 times. It features an economical bottle, which is enough for 20 applications. For removal, it is better to use the liquid of the same manufacturer.

The application of single-phase gel polishes does not take much time. However, in order for the coating to last longer without chipping and cracking, it is necessary to strictly observe the application technology and the drying time in the lamp.