Coat pattern for girls in three sizes. The pattern can be received instantly by e-mail

It is necessary to develop good taste and sense of style in children, and even more so in girls, from early childhood. Any mother can sew a coat for a baby, in such a thing the child will feel warm and comfortable.

Coat patterns for girls different ages can be downloaded and used at work. Depending on the chosen model, age differences and cut features, patterns may have certain differences, but, in general, a standard pattern consists of the main parts: back, front, sleeves, collar. A hood or patch pockets are also available.

Coat patterns for girls under 10 years old

For a little girl, a mantle coat is perfect, which you can sew with your own hands, focusing on patterns. For work you will need the main and lining fabric, insulation, original decorations. The calculation of the fabric should be done in accordance with the size of the child, who is 2 years old. All children are different, so even an already developed pattern should be adjusted according to individual sizes.

To date, there are various coat models that you can sew on your own for a girl who is 3 years old. When searching suitable model it is important to remember that a child at this age is very active, so the coat should be sewn in such a way as not to hinder the child's movements. Whatever model is chosen, the main thing is to focus on the developed pattern in the work. The pattern of any coat model consists of the following parts: back, front, upper and lower halves of the sleeve and collar.

Patterns of an autumn coat for a girl under 10 years old

The model of an autumn coat for a child who is 5 years old, first of all, should be practical, comfortable and, not least, warm to protect the child from strong winds.

The construction of a coat pattern for a girl should begin with the fact that you need to take all the necessary measurements, namely the length of the back to the waist, measure the estimated length of the coat, find out the length of the shoulder, the half-girth of the neck and the half-girth of the chest, as well as the length of the sleeve.

The pattern of a children's coat for a girl, after taking measurements, is transferred to paper. First of all, you need to draw a rectangle. The length of the lines of the rectangle should be equal to the intended length of the coat, and the width should be equal to the distance equal to the half-girth of the chest indicated in the measurements, plus 8 cm. You should also measure the depth of the armhole, mark the waist line and back width, then outline the width of the armhole and the line of the sides. The pattern consists of several parts: a back, in front, a patch pocket is outlined with dotted lines.

For schoolgirls irreplaceable thing can become a demi-season coat. For children who are 9 years old, it is important that the coat is rich in colors, perhaps an unusual cut with an interesting decor, but at the same time comfortable and warm.

What parents do not want their child to have all the best, from toys to clothes. Especially if a little princess grows up in the family, because in the female nature from birth there is a desire to dress beautifully. Therefore, today we will look at how to sew a beautiful, bright coat for your fashionista. Of course, such clothes are not very suitable for spring walks in puddles or digging in the sand, but they look great while walking in the park or attending various social events. The pattern for creating a stylish coat for a girl can be completely different - try to dream up!

Tailoring of almost any clothing, including coats, begins with basic pattern. Let's take a step-by-step look at how to build a base pattern for a children's coat.

Learning to build a base pattern for a coat for a girl

1. Coat length.
2. Back width.
3. Chest girth.
4. Neck girth.
5. The length of the sleeve.
6. Arm circumference.
7. Fist circumference.

On the left side of the sheet we build a right angle with the apex at point A. Down from point A, along a vertical straight line, we set aside a value equal to the length of the coat by measure + 1 cm. We put point B, and from it we draw a horizontal line to the right. Then again from point A we lay down a segment equal to 1/3 of the neck girth + 2cm, set point C and draw a horizontal line from it to the right - this straight line is the back width line.

From point G, we set aside 2 cm upward along the side cut and put a point, we smoothly connect this point with point B.

We continue line B to the left by 3 - 5 cm and set point B1, connect point B1 with the neckline cutout point on line AB, we get the line of the middle of the back. When constructing a pattern of a coat with a straight cut, the line of the middle remains a straight line AB.

Horizontal B and the line of the neckline continue to the right by 5 - 7 cm, we connect the resulting points with a vertical line indicating the side cut. Then, to the left of the side cut along the neckline, set aside a segment equal to 1 cm and set the H point, smoothly connect the H point with the side cut line. Thus, we get a coat model with a straight or round collar.

This is how, without much difficulty, you can dress your princess in a new stylish coat or model products of any other style (for example, the same as mom's). As an example, look at some photos of coats for girls of different ages:

We create a stylish coat for a girl for 2-3 years with our own hands

This amazingly cute coat for a girl for autumn is not only very practical, but also very warm, because it is tightly fastened up to the collar! In this coat your girl will not be afraid of any winds.

1. Back length to waist………………………..28 cm
2. Coat length……………………………………..55 cm
3. Shoulder length……………………………………….10cm
4. Half neck…………………………………14 cm
5. Semi bust………………………………32 cm
6. Sleeve length……………………………………..40 cm

Building a pattern grid

Fig.1. Coat pattern for a girl

Draw a rectangle ABCD.

The length of the coat for girls. Rectangle lines AD=BC=55 cm (length of the coat to measure).

The width of the coat for the girl according to the measure. The lines of the rectangle AB and DC are equal to 40 cm (half circumference of the chest according to the measurements plus 8 cm for all sizes): 32 + 8 = 40 cm.

The depth of the armhole coat for girls. Set aside 16.7 cm from point A down - point G (1/3 of the half-girth of the chest according to the measurement plus 6 cm for all sizes): 32/3 + 6 \u003d 16.7 cm. Draw a straight line from point G to the right until it intersects with the line BC - point of intersection Г1.

Coat waist line for girls. From point A, lay down 28 cm (the length of the back to the waist according to the measurements) - point T. From point T to the right, draw a straight line until it intersects with the BC line, the intersection point is T1.

The width of the back of the coat for girls. Set aside 14.7 cm from point G to the right - put point G2 (1/3 of the half-girth of the chest according to the measurement plus 4 cm for all sizes): 32/3 + 4 = 14.7 cm. Draw a straight line upwards from point G2 to the intersection with line AB - letter P.

The width of the armhole dress for girls. Set aside 10 cm from point G2 to the right - point G3 (1/4 of the semicircle of the chest by measure plus 2 cm for all sizes): 32: 4 + 2 \u003d 10 cm. Draw a straight line upwards from point G3 to the intersection with line AB - point P1 .

Raising the shelf of a coat for a girl. From points B and P1, extend the lines up by 2 cm, put points W and P2. Connect points W and P2.

Side line of a coat for a girl. Divide the width of the armhole G2G3 in half - point G4. Draw a perpendicular down from the G4 division point to the DC line - point H. Designate the intersection point with the TT1 line as T2. Auxiliary lines of a shoulder and armholes of a coat for the girl. Divide lines PG2 and P1G3 into 3 equal parts.

Patterns of a coat for a girl - building a back

Neckline coat for girls. Set aside 5.2 cm from point A to the right (1/3 of the half-girth of the neck according to the measurements plus 0.5 cm for all sizes): 14/3 + 0.5 = 5.2 cm. Set aside 1.5 cm from point 5.2 up Connect points A and 1.5 with a concave line.

Shoulder slope coat for girls. Set aside 1.5 cm from point P down. From point 1.5 (neck) through point 1.5 (shoulder slope) draw a shoulder line 11 cm long (shoulder length according to measurement plus 1 cm for all sizes): 10 + 1 = 11 cm.

Coat armhole line for girls. From point G2, dividing the angle in half, set aside 2.5 cm. Draw the armhole line from point 11 through the upper point of dividing the line PG2, point 2.5, to point G4.

Side seam coat for girls. Set aside 2 cm from point T2 to the right. Draw a side seam line from point G4, 2, to the intersection with the DC line, set aside 1 cm upwards - point H1.

The bottom line of a coat for a girl. Divide the distance DH in half and connect the division point to the point H1.

Finished coat pattern for girls school age for height 122-128-134cm.

The pattern is sent instantly by e-mail. See how to get a pattern without downloading.

Children's coat for a little fashionista of a semi-adjacent silhouette, extended downwards, with vertical reliefs and pockets with a leaflet. Collar - turn-down with rounded ends, fastener with loops and buttons. The pattern is suitable for sewing a children's coat or raincoat.

Suitable for tailoring different fabric, depending on the season, i.e. from the appointment of the coat. Suitable as coat fabrics: drape, tweed, boucle, and tight jersey, corduroy, denim, quilted raincoat fabric, etc.

The pattern of a children's coat is given for a height of 122-128-134 cm WITHOUT ALLOWANCES FOR THE SEAMS.

The pattern can be received instantly by e-mail.

Click the button GET A PATTERN- a few simple manipulations and the pattern appears in your email box. It is this method of obtaining a pattern that is the most optimal for today - quickly, inexpensively, without advertising and without problems.

When filling out an application, be careful when writing the recipient's e-mail address, because the system will automatically send a letter with a pattern file to the address you specified.

Even in exceptional cases, if you have any questions upon receipt of the pattern, we will not leave you and will bring the matter to its logical conclusion.

Open a letter with a pattern (a PDF file with a pattern will be in the attachment), print it on a regular printer, glue it, cut it out to the desired size and the patterns for cutting are ready.

Note: first print one sheet with a 10x10 cm control square. Check that its sides correspond to exactly 10 cm. Achieve this using your printer settings. Now you can print all the pattern sheets and assemble them into one puzzle, according to the pattern, using narrow adhesive tape or a glue stick.

Before cutting out the pattern pieces, take a tape measure and compare your measurements with the pattern dimensions. Check all girths, length of the product. Determine the optimal size for yourself and cut out the details of the pattern.

ATTENTION! The pattern is given without SEAM ALLOWANCES!(When cutting, you must add them).

Recommended seam allowances: seam allowances 1-1.5 cm, overturned seams 0.7 cm, hemming seams 2-4 cm (depending on the processing method).Provide additional allowances in those places where clarifications after fitting are possible.

Allowances for the cut (slots) are indicated on the patterns, but when cutting, we leave these allowances only From the left side.

The pattern is designed for a conditionally typical figure. If necessary, make changes to the patterns before cutting.

OPEN COAT

When cutting, do not forget to allow for seam allowances!

CUT DETAILS

• The middle part of the shelf 2 parts
• Side shelf 2 parts
• Middle back 1 piece
• Side back 2 parts
• Upper part of the sleeve 2 parts
• Lower part of the sleeve 2 parts
• Collar 2 parts (top and bottom)
• Leaf pocket 2 parts
• Pocket valance 2 parts
• Selection 2 parts
• Turning the neck of the back 1 piece
• The lining is cut according to the main details: the details of the shelf, back and sleeves. At the same time, the lining of the shelf is cut without taking into account the selection, and the back lining - without taking into account the facing of the back.

SEWING A SKIRT

NOTE:

After each machine operation (grinding, turning, attaching, adjusting, etc.), it is mandatory to wet heat treatment(ironing, ironing, etc.). Upon completion of tailoring, the final wet-heat treatment of the entire product also follows.

• Duplicate with a glue pad the collar, the facing of the neck of the back, the leaflet, the lower collar, the allowances for the hem of the bottom of the product and the allowances for the hem of the sleeves.
• Process the pockets on the side of the shelves.
• Sew reliefs on the shelf and on the back.
• Stitch side and shoulder sections.
• Finish the collar.
• Sweep the collar into the neck.
• Stitch the shoulder sections of the facings and ribs.
• Process the sides and neck, while sewing in a pre-set collar.
• Process the sleeves. Stitch front and elbow sections.
• Stitch the sleeves, having previously swept them into the armholes of the product.
• Sweep allowances at the bottom of the coat and the bottom of the sleeves.
• Stitch all lining pieces.
• Connect the lining to the main product.
• Hem the bottom of the product.
• Overcast loops, sew on buttons.

All parents want their child to have all the best - this applies to toys, household items, food, of course, and clothing. This is especially true for little princesses, because women have a desire to dress fashionably, beautifully, stylishly from birth. Therefore, in this article we will look at how to sew a coat for a girl with our own hands. We will also build patterns ourselves in order to facilitate the work process as much as possible.

How to make a pattern yourself?

The manufacture of any clothing begins with the construction of a basic pattern, which means that it is necessary to start with this. To sew a coat for a girl with your own hands, for beginners, you should first take the following measurements:

• Length of the product.
• Chest girth.
• Back width.
• The length of the sleeve.
• Neck girth.
• Arm circumference.
• Fist circumference.

back detail

The construction of the drawing of the back part occurs according to the following scheme:

1. Making a back piece. Take a sheet of paper, build a right angle on its left side, mark its top with point A. Then, down from it in a straight vertical line, set aside the value corresponding to the length of the coat with an increase of 1 cm. Mark B, draw a horizontal line to the right of it. Then again, from it, lay down a segment equal to a third of the girth of the neck and plus 2 cm, mark point C, draw a horizontal line from it to the right. So we got the back width line.
2. Neckline design. Down from top A, set aside 1 cm and mark it, to the right, a segment, the length of which will be a sixth of the neck circumference and plus 0.5 cm, mark it. Using a pattern, connect all these marks to get a neckline.
3. Shoulder shaping. To the right of vertex C, measure a segment equal to half the width of the back, add 1 cm and mark point D. From it, build a perpendicular upward with a dotted line to the point of intersection with the horizontal of point A. Measure down horizontally with a dotted line 3 cm, mark point E. Connect it with an inclined line with a neckline located on the horizontal line A, continue beyond point E by 1 cm, mark point E1.
4. Side cut design. To the right in a straight line from mark C, set aside a segment equal to a quarter of the circumference of the chest, add 1 cm, designate it as D1. Draw a perpendicular down from it with a dotted line until it intersects with horizontal B. On a perpendicular down from D, set aside a segment equal to the sixth part of the neck circumference, put a point F, which will indicate the depth of the armhole. To the right, continue horizontal B beyond the dotted line by 6 cm and put a point G. Connect G and F, as a result, we will get the necessary line.
5. The design of the armhole line. Connect F and E1 with a smooth line through the top of D using a pattern.
6. Bottom decoration. On the side cut, set aside 2 cm upwards from point G, make a mark, connect it smoothly with vertex B. Continue line B by 3 cm, mark B1, connect it to the neckline along segment AB, we get a line indicating the middle of the back.

Shelf detail drawing

The pattern of this part is built as follows:

1. On the right side of our sheet, build a right angle, mark the top as A. From it, vertically and horizontally, draw straight lines, the so-called auxiliary ones. Lay down the length of the coat horizontally down, add 3 cm, mark B. Draw a horizontal line to the left of it. Down from mark A, set aside a vertical segment corresponding to a third of the circumference of the neck, add 3 cm, place C, draw a horizontal line to the left of it.
2. Neck shaping. According to the already known scheme, build the width of the neck. To build its depth, from top A, lay down a straight line equal to the sixth part of the neck circumference and add 2 cm. Put a mark indicating the depth and width of the neckline, smoothly connect them using a pattern.
3. Shoulder shaping. Draw an auxiliary line with a dotted line starting from the neckline of the front below line A by 4 cm. From the neckline mark located on line A, set aside along an inclined segment equal to the length of the shoulder minus 0.5 cm to the point of intersection with the dotted line, indicate vertex D .
4. The design of the side cuts. Set aside the value corresponding to one-fourth of the circumference of the chest plus 4 cm horizontally C, set the designation E. Draw from it perpendicularly down to the top of the straight line. On the same vertical line, lay down a segment from the top of E, equal to a sixth of the girth of the neck with an increase of 2 cm, put a mark F, indicating the depth of the armhole. To the left of the auxiliary perpendicular, continue line B by 8-10 cm, mark G, connect F and G with a straight line at an angle to get a side cut.
5. Armhole decoration. Lower the perpendicular from mark D to the point of intersection with line C, the segment. Set aside 1 cm to the right of the received mark, mark E1, indicating the width of the shelf. Connect smoothly using the pattern tops F, E1, D.
6. Registration rounded bottom. Set aside 2.5 cm upward along the side cut from the top of G, then connect this mark smoothly with mark B, the straight line AB will act as the middle of the shelf.

Building edge slices

To sew a coat for a girl, we will definitely have to build a pattern of these details. For this:

1. It is necessary to continue the neckline and horizontal B to the right by 5-7 cm.
2. Then connect the resulting marks with a vertical line indicating the side cut.
3. Further from it, a segment of 1 cm is laid to the left along the level of the neckline, the mark H is put.
4. It should be connected smoothly with the side cut.

As a result of such simple manipulations, you will get a coat model with a round or straight collar.

Round collar pattern:

1. Connect the details of the shelves and back along the shoulder sections, draw a contour on paper along the lines of the middle of the shelves and the neckline.
2. Remove the patterns of shelves and backs, build a collar within the resulting contour.
3. The cut of its rack can be formed by a contour along the neckline, which is located between the sign indicating the middle of the back (A) and the sign of the middle of the shelf (B).

Sleeve pattern

A sleeve pattern is built within the same grid, because it consists of two parts:

• the top, which is slightly larger in size;
• lower size.

Procedure:

1. First, you need to build a rectangle ABCD so that its length corresponds to the length of the sleeve, the width is equal to one third of the chest circumference and plus 2 cm.
2. Then the line AC is divided in half, this place is indicated by the letter E.
3. Then we descend along the perpendicular to the point of intersection with line B.
4. A segment equal to AE is laid down vertically from the top of A, puts
5. the mark F, then a horizontal line is drawn from it to the intersection with the segment CD. A segment corresponding to half of segment AF is laid down vertically from mark C, mark G is placed, then a horizontal line is drawn to the left of it until it intersects with line E.

As you can see, there are no difficulties in building a pattern, if you follow the instructions, step by step. Now, further on, we will look at how to sew a coat for a girl with our own hands in order to dress our beloved daughter in new, stylish, beautiful outfits, to model independently products of any style.

How to sew a children's coat on your own?

Do-it-yourself coat for a girl can be sewn according to the following scheme:

1. Start working from the back half. Divide the child's height in half. Align the end of the tuck with the division point.
2. Cut the back half from the stem to the end of the tuck, just short of the edge, about 3mm. Close the tuck. Shift the center line of the back from the fold by 7 cm. Increase the cutting element at the bottom in width by 15 mm due to the fold. Make a cut of two parts.
3. Open the two parts of the transmission, taking into account the allowances. Mark the locations of the pockets.
4. Cut out the sleeves.
5. Attach the center of the collar to the place of the fold, cut out two parts from the lining and base material.
6. Sew darts on the chest and shoulders, sew a one-sided fold.
7. At the entrance to the pocket to the front halves, make the equity strips of fabric. Finish the pockets.
8. Iron the product.
9. Finish the lining, sides, stitch the coat.
10. Process the sleeves, sew them into the armholes.
11. Finish the collar and sew into the neck.
12. Make loops, sew on buttons.
13. Finish the units and elements of the product.