Chef's hat for a child. DIY chef's hat: pattern and simple instructions. Product care

You can take incredibly beautiful photographs in themed costumes. For example, in a chef's costume. Let's get inspired by little cooks together and figure out how to sew a costume - a hat (cap) and an apron with your own hands.

A master class on how to make it is given below. And also topics and ideas about costumes here:

Chef hats, photo gallery

Cap pattern

So, for the suit we need measurements:

OG - head circumference

OT - waist circumference

B - height of the chest part of the apron

B - hem length

G - width of the chest part of the apron

Let's start sewing with a chef's hat. It consists of 2 parts. The length of the base strip is equal to the circumference of the head + an allowance of 1 cm and a couple of cm for fit, the height is 2 times the height of the cap, and the diameter of the round blank depends on how voluminous you need the top. Depending on this, we multiply the OG by 2 or 3. We add 1 cm to the seam. So that you can make a beautiful voluminous top by squeezing the edge of the bottom when connecting to the crown. For the cap to stand, you need to take more thick fabric or glue with non-woven fabric.

For example, in Fig. a, the little cook's hat has a very large bottom diameter, about 3 times larger than the diameter of the head.

In Fig.b, the diameter of the bottom is approximately 2 times larger than the diameter of the head.

Fold the rectangle in half and stitch on the side. Then we bend it along the fold line. This is done to make the edge of the cap look neater and to avoid bending along the contour. As a result, we get a double ring of fabric, on one side of which there is a fold, and on the other there are 2 raw layers.

How to sew a chef's hat and apron? Often parents are faced with the question of sewing a suit for their child for a matinee in kindergarten or for school. Sometimes at holidays you need to play the role of a cook.

To do this, you will need to sew at least two elements of the costume: a chef's hat and an apron. To complete such a task, you do not need to be a professional seamstress or have a sewing machine. This article describes in detail how to sew a chef's hat with your own hands for a child. Believe me, you will do great.

Taking measurements

Before you start sewing any clothes, you need to take your measurements correctly. When creating a chef's hat, you need to measure the circumference of the child's head. Before sewing a chef's hat, you also need to think about the clasp at the back in advance. It can be Velcro, buttons, elastic, ties. If the rectangle of the cap will be closed, then you need to add a few centimeters to the head circumference for Velcro. The same goes for button closures. To sew on a wide elastic band, you can make the strap 5 cm shorter by sewing it on the back of the product. If you decide to tie the strap at the back with strings, then fabric the size of your head circumference will be enough. The plank can be sealed using an additional lining: inserts made of dense material of the same color.

To understand how you need to carefully look at the patterns. For the cap itself, you need to take a circle, the diameter of which will be equal to twice the length of the rim. This will turn out to be a folded cap. If it is smooth and cylindrical in shape, then you can take the same measurements. It is better if the folds are still present, forming a small beret on top. It can be beautifully laid on the side of the head.

How to sew a chef's hat for a child using a pattern?

It is best to first transfer the measurements onto thick paper, drawing a drawing of both the rim and the circle. It is better to make a double rim. This way it will be denser, and it will be easier to sew the parts together. Once the drawings are ready, they can be transferred to the material. Don't forget to leave 1 cm of fabric at the hems. To ensure that the top is sewn beautifully with even distribution of folds, you need to take the next step.

You should stretch a thread around the circumference of the circle, stitching the fabric along the edge with basting stitches. It is better to take a thick cotton thread so that it does not break when pulled together. When the thread is threaded around the entire circumference, you need to tighten it to the size of the rim. To make the fold even, you need to straighten it with your hand, spreading it along the entire edge.

Before you need to baste the rim around the circle, apply the resulting beret with the wrong side. In this case, the seam will be internal. All that remains is to fold the rectangle of the headband in half and carefully sew the second part of it so that the seam is not visible. If the owner has sewing machine, then the process is accelerated and facilitated. Then the seams can be on the front side. If the machine is not at home, then it is better to hide the seams on the wrong side for an aesthetic appearance products. All that remains is to sew on the fasteners and try the product on the child’s head. Such a detailed explanation of how to sew a chef's hat for a child using a pattern will help you easily cope with sewing.

Chef's apron

To sew a chef's costume, you not only need to know how to sew a chef's hat for a child using a pattern, but an apron is also necessary. Let's look carefully at the drawing of the presented apron pattern. You will need very little material and a piping that will be sewn around the perimeter of the apron. First you need to draw a drawing on thick paper according to these measurements. They can be adjusted depending on the child's height. The notch for the arm can be drawn by eye using patterns or a protractor. Then everything is transferred to the fabric and cut along the contour with sharp scissors. A piping is sewn around the perimeter of the apron. You can choose any length of the apron; the presence of a pocket is also a personal matter for everyone.

You can also vary the colors. The apron and the circle of the cap can be made of bright material of any color, and it is better to make the rim white. You can do the opposite: the apron and apron are made of white fabric, and the piping and upper circle of the cap are sewn from colored fabric.

If you want your baby to feel comfortable at the party, then don’t be afraid to pick up a thread and a needle. In fact, absolutely anyone can learn to sew; there is nothing difficult about it. In one evening, you can sew according to the advice in this article. All that remains is to starch and iron all the details well, then the cook will look just great.

Oksana Stepanova

The master– the class will tell you how to sew apron and cap for the duty area.

For this you will need:

Pattern paper;

Satin 80cm with a width of 1.5m;

Satin braid 4m;

Fabric yardage is given for 2 aprons and 2 caps. If you need to sew one set, then the fabric consumption should be reduced by half.

I'll make the pattern made on regular newspaper.

The cap is made from a circle D=30cm. and rim, length =

head circumference (54cm.)+ 2cm for seams and +1cm for loose fit=57cm.

Width 10cm + 2cm. at seams=12cm.

Cut out the ties for tying at the waist:length 40-45cm;

3.5 cm wide.

ties, for tying on the neck:length 25-30cm; 3.5 cm wide.

You also need to cut out a pocket: width 15cm +2cm. at seams=17cm. ;

Length 20cm +2 seams=22cm.

The two small stripes in the photo are eyelets for cap and apron.

The two small squares are pocket enhancers.

Two pockets in the photo because I sew 2 apron and 2 caps.

The strip of fabric in the photo = the length of the pocket and the width of 5-6cm. - this is the top part

pocket, you can do without it.

Side cuts and bottom apron bend and hem.

Top cut from neckline and armhole apron bend and hem.

At the end of the line, insert a loop under the seam for apron.

From the front to the sides and bottom apron we sew the satin braid.

We process the pocket, stitch the braid on the front side, during stitching, after 2-3cm. make a fold.

We place the finished pocket on apron in the middle, from the wrong side we apply reinforcements to the upper parts of the pockets. We sew the pocket.

Sew the braid to the top apron and immediately sew on the ties, and also sew on the ties to tie at the waist.

Let's get started making a cap. Take a circle and sew a stitch along the edge of the circle without bartacks. We sew the edge sections along the width. We tighten the circle to the length of the rim. Putting the parts together front side to each other, connecting the slices. We grind.

We bend the second cut of the rim onto the inner side of the circle, bend and hem the rim, closing the cuts. We sew the braid to the finished cap.

Here you go aprons and caps for the duty area.

These are my students at work. I wish everyone good luck. Thank you for your attention.

Publications on the topic:

Step 1. Mixing the clay. Take a piece of clay and soak it in a small amount of water. Place a bowl of clay for 3-4 days. Then.

Summary of the master class for parents 1 junior group Goal: Develop collaboration skills. Introduce parents.

To work you will need: thin, durable wool threads, scissors, cardboard. 1. Body – cut (wrap it on cardboard, then cut it.

I present to you a master class on making a lapbook on traffic rules. Lapbook (lapbook, or as it is also called a thematic or interactive folder.

By the beginning of the school year, we decided to add the “Seasons” layout to our group’s developmental environment. First, I made the layout autumn forest. For.

I present to you a master class on making volumetric masks. They can be used not only in theatrical activities, but also in games. They fit.

Games with children are a fun pastime for all moms and dads. They often take place in the kitchen, where the baby is interested in literally everything. I especially like to sculpt something from dough, cut vegetables into cubes and much more. To make it even more interesting for your child to spend time in the kitchen, you can sew a chef’s hat and an apron for your little assistant. This will add a special holiday atmosphere and turn the game into a real, long-lasting event in a child’s life.

Materials and tools

First you need to decide on the style of the hat and its shape. The lower part can be wide or, conversely, narrow. It depends on the tastes and preferences of the seamstress mother, as well as on whether the baby will wear the hat at home or in the garden. The upper part can be gathered into gathers or placed in neat folds. When the main features of the future product are completely formed into a clear, precise picture, you can begin to work.

The kitchen is one of the most entertaining places in the house

Before you start making your own chef's hat, you should stock up on all the materials and tools necessary for the work. It is advisable to choose a simple fabric for the hat: cotton or linen. The latter holds its shape particularly well and also has excellent breathability. The product will not hover over your head and create discomfort in a hot kitchen, where the air temperature during cooking is already higher than in all other living spaces.

If you don't have a suitable piece of fabric, you can use a white or colored pillowcase. The cap itself will consist of two parts: upper and lower. They can be made the same or use fabrics different colors. If a children's chef's hat is sewn as part of carnival costume for a child in kindergarten, you can choose any material. For example, it will do rayon or other synthetic fabrics.

The bottom of the chef's hat should be tight. This can be achieved with the help of some auxiliary materials known to every seamstress. Duplication or compaction of fabric is carried out using non-woven fabric or dublerin. Non-woven fabric, a cheaper material, comes in different densities, adhesive and non-adhesive. Since the cap will be made of light-colored fabric, the interlining is needed to be the same. It is desirable that it be adhesive. It is easier to work with such material, and the appearance and shape of the product will be much neater and more stable.

The assembly can be done using a needle, laying two parallel rows of hand stitching, and then simultaneously pulling their ends to the required dimensions. Distribute the mixture evenly.

It will be easier and faster if you do this operation on a typewriter. It is necessary to loosen the upper thread, increase the stitch and in this mode lay two machine lines. Pull the ends of all threads at the same time. Stretch to the specified dimensions, gather evenly around the entire circumference.

Folds can be made by eye, placing them randomly and securing them manually or using a machine. But it’s better to calculate the number of folds and their location in advance and mark them on the fabric. To do this, you need to measure the lengths of two circles:

• bottom;
• band.

Subtract the smaller value from the larger value. Determine the desired depth of the folds (2-3 cm). Double the selected value - this is how much fabric will go deep into the fold. For example, 2×2 = 4 cm. Divide the difference between the two circles by 4 cm and you will get the number of folds that need to be made. Apply with a pencil to the fabric and make markings. Place folds, secure them with pins or stitching (machine, hand).

Attention! If the length of the bottom and the band do not match, you need to adjust (increase, decrease) the depth of the folds.

Product care

A chef's hat should be distinguished from other things by its snow-whiteness and impeccable shape. After washing with special bleaching agents, the headdress must be starched. This is the only way he can maintain the required shape.

Any mother, armed with everything necessary materials, tools and knowledge, will be able to sew a chef’s cap and delight your baby with new fun in the kitchen. Thanks to such games, over time, the little fidget will grow into a good helper for his parents.