Do-it-yourself five-pointed paper star step by step. Craft star - the best ideas and recommendations on how to make a star with your own hands (90 photos). with smooth edges

As a rule, the older a person becomes, the more nostalgically he begins to remember his childhood years. For many adults today, this time is permeated with Soviet symbols, among which red stars can be noted.

In this master class, I will show several options for how to make a paper star with your own hands with step by step photos. Such a five-pointed symbol may be relevant now. For example, a red star is perfect as a decoration or as a decoration. New Year's interior. It is not difficult to make it out of paper, focusing on the proposed master classes.

How to make a paper star with step by step photos

01. Do-it-yourself voluminous paper star

To create a three-dimensional star, we need to prepare:

• red paper;
• scissors;
• pencil;
• ruler;
• PVA glue.

First, cut out 5 squares of the same size from red paper.

Our blanks have a side of 9 cm.

After that, you can begin to add each square. First, make a diagonal fold.

Then we unfold the square blank. Bend the right side to the middle.

A similar fold must be done on the left side.

Now we need to make folds in the upper part of our workpiece. First we fold the right side.

After that, make a fold on the left side. Our workpiece has acquired the shape of a rhombus.

Fold it in half.

The top layer needs to be bent to the side.

In this case, it is worth paying attention to the fact that on the reverse side the top of the triangle coincides with the fold line.

Slightly unfold the workpiece.

Smooth out the fold lines.

Now we begin to straighten one of the rays of the future star.

Gently straighten its inner layer.

Now we give the workpiece next view. We have an element consisting of one whole beam and a half.

We need to make 4 more such blanks.

You can start assembling the star, and this will require glue. We apply it to one half of the beam.

After that, we insert one element into another.

So we connected 2 modules.

We glue the remaining elements in a similar way. Our volumetric paper star is ready.

02. How to make a star using the modular origami technique

Technique modular origami allows you to create three-dimensional figures using the same elements. Our master class presents the phased production of a star from several modules.

To work, you need 10 square sheets of paper. We took sheets of paper in red.

We start by making one module. For him, we need two sheets. First, bend them along two diagonals. Now these same sheets of paper should be folded into transverse directions but in the other direction.

From one we fold the workpiece in the form of a double square.

From another sheet of paper with pre-planned folds, we fold the blank in the form of a double triangle.

Now insert the triangle inside the square.

We bend the protruding tips from the square inward. First, we do this from two opposite sides.

Then we unfold the module blank and bend the protruding corners again. So we got one of the modules.

We need to make 4 more such modules for the future star. Let's start connecting the modules. They will be attached to each other due to the corners protruding on the sides.

Two corners of one workpiece should be inserted under the folds of the other from the inside.

We introduce the corners of another module from the outside under the folds of the neighboring one.

So we continue to connect the individual modules.

We close all 5 elements in a ring.

To decorate the interior space or celebratory event, often used toy and decorative stars. There are a lot of variations on the theme of creating stars, as well as materials. These are materials, and paper, and foil, and similar improvised things.

Let's talk today about the most common formats for creating stars for the holiday and just for interior decoration. Photo crafts on the theme of a star, schemes, as well as master classes will facilitate this task.

How to make a small paper star

Stars of this type come out small, but in variety they look beautiful and spectacular. To make them, you need glossy or multi-colored paper, as well as scissors.

Initially, special blanks are made: using scissors, cut paper strips of the required size. Their length and width are selected in accordance with the dimensions of the product being created.

A loop is made from the strip, while the short end should be bent. So, it turns out a figure with five corners, which needs to be pressed a little. It is necessary to turn the product over, performing actions with a longer end.

Using a strip, we make a canvas, wrapping the figure in stages, pressing it to a minimum. There should be about 10 such wraps. The edge must be folded down.

The next stage: we make a star shape from a pentagon. We create rays.

Stars look great in interior design: they are good for filling small containers such as cans or vases. If you do this activity with kids, it will help in training their hand motor skills.

Creating a three-dimensional paper star

A master class on how to make a star with your own hands will allow you to create original crafts, decorating the interior at your own discretion. So, we offer several options.

Option one

• From multi-colored paper it is necessary to cut out two squares of the same parameters. Fold one shape on one side, then the second.
• After that, fold the square diagonally in half twice.
• Make 4 cuts from the edge directly to the middle of the resulting folds. The folds should be marked with a pencil.
• Bend all the edges of the figure.
• Apply glue to the edges of the resulting beams and glue. Half of the craft is ready.
• Follow the previous steps to make the other half.
• Apply glue to the inside of the rays, aligning the shapes. The original paper star is ready.

Another idea on how to make a three-dimensional star according to the instructions:

• Draw rays on paper, print, and then transfer to the required sheet.
• Bend, following the lines, glue directly along the edge.
• After that, five templates prepared in advance should be glued together to make a star.
• The size of the product can be created at your discretion, reducing or increasing the template.

star paper origami

Using templates, schemes for making this type of star, as well as being guided by our recommendations, you will make a great product for interior decoration.

The square sheet must be folded in half, then, bending one of the tops of the triangle. A similar action should be done with the second top of the rectangle.

Another corner of the rectangle must be attached to the intersection of the existing folds. After that, you need to bend the existing rays along the drawn lines. Cut off the remaining tail of the shape. With proper creation of folds, a pentagon will turn out on the side of the turn.

The last stage is considered one of the most difficult. To form a star, you should carefully bend and wrap the existing template along certain lines.

foil star

If you want to know what else you can make a star with your own hands, which is good to decorate Christmas tree, then it is, of course, foil.

Note!

To work, you will need wire, light tinsel, wide and narrow blue tinsel, five blue toys, a ring (3 centimeters in diameter) made of wood, aluminum foil, candy foil, glue, thin wire.

We create a frame from a thick wire, on which it is necessary to wind light tinsel, and thin blue on top. Then the workpiece should be set aside and the main decoration should be made. For these purposes, you need a ring made of plastic or solid, as well as foil wire.

It is necessary to bend the wire in half, and then wind it around the ring. In this case, the ends should be threaded through the loop, tightening. In order to completely braid the ring, 25 wires are needed. After that, the wires placed nearby are twisted and cut so as to align the edges.

Cut out a circle from cardboard and glue the decor to one side. From blue foil, you need to roll 8 pieces of balls that are glued inside the created ring. Turn over and on the reverse side you need to stick a circle of foil on the cardboard blue tint. Decorate it with light foil balls.

On the outer, as well as the inner edges of the created circle, you need to glue blue tinsel. We decorate the central part with wire in the form of a spiral.

Note!

Similar spirals are attached with glue to the balls. of blue color. Glue blue tinsel in the central part. Using a thin wire, we attach the balls to the star, we fasten the decor in the central part.

We cut out stars from their white packaging material and attach them to a huge star with glue. In the middle of all the miserable stars we glue balls made of foil. At the end, using wire, we fix the decor placed in the central part. The ends of the wires need to be twisted a little. The loop should be tied for easy hanging of the toy.

DIY star photo

Note!

Sometimes there are times when you need a three-dimensional paper star. Whether New Year or Defender of the Fatherland Day. Or maybe you just want to add details to the interior.

Christmas tree star

It can be made from plain colored paper or use one that has a suitable pattern. Then you get the most unusual voluminous star made of paper. You can search for a template for it on the net or draw it yourself. If the second method is chosen, then you will need a simple pencil and a ruler with a protractor.

On a thick sheet of paper, you need to draw two intersecting lines. They must be perpendicular. From the intersection point you need to build a circle. Its size corresponds to what the finished three-dimensional paper star should be.

Then the circle needs to be divided into sectors of 36º. There should be ten beams. Every second is supposed to be divided in half. The long ones will be the rays, and the short ones will be the hollows of the star.

The ends of the short rays must be connected to the long ones. The star is already visible. It remains to draw strips for gluing on the side of each beam. And the template can be cut.

On it, cut out two parts from the prepared paper. Then bend the star along the rays and depressions. The rays are on the front side, and the depressions are on the wrong side. The strips for gluing will need to be bent inward. It remains to glue the two halves and carefully and slowly inflate the star from the inside. Naturally, after the glue has dried.

Star from individual rays

In this case, it will also turn out to be five-pointed. And it will stick together not from two halves, but from five rays.

In order to get a three-dimensional paper star, the scheme should be like this. For each ray, you need to draw 6 rays, with 21º angles between them. The angle between the axis of the cavity and the segment to the end of the beam should be 120º. On the inside and on one side of the workpiece, you need to draw tongues for gluing.

The workpiece must be folded and glued along the side. Then also make 4 more beams. At the final stage, it remains only to connect all 5 parts together. And the five-pointed three-dimensional star made of paper is ready.

Eight pointed star for Christmas

It will require two square sheets of thick colored paper. To get a three-dimensional paper star, you need to fold each of them 4 times. Two diagonally and two from the middle of the sides. All folds must go through the center of the square.

Along the lines that go from the middle of the sides, make cuts to the middle of these rays. On the wrong side bend four beams. Lubricate one of the halves of each ray with glue and glue them together. The figure will gain volume. Similarly, actions are performed with the second square.

The two halves need to be glued together. An eight-pointed star will turn out if, when gluing, put the halves at an angle to each other, so that the neighboring rays are in the middle between the same ones in the second part.

Origami - eight-pointed star

No glue is required to create it. However, as with all origami products. From paper, a three-dimensional star is made on the basis of eight squares. All of them are formed according to the same principle.

First, the square must be folded diagonally and unfolded. Then from one corner make folds to the resulting fold. The following steps repeat the fold from the other end of the diagonal. The square now looks like a diamond.

Now the part that was folded first is bent and unfolded again. The angle coincides with the top of the rhombus, and the side follows the line formed from the edge of the square. And so on both sides. A pattern of two intersecting folds appears at the top of the rhombus.

Next, the product must be turned upside down and inside out. Bend along the right marked line and take your fingers at the point of their intersection. Now the entire upper part of the part is supposed to be folded in half. Bend the corner, which will turn out outside, to the side. You get something that looks like an open beak. You will need 8 such blanks.

It remains only to connect them. Insert the small pieces inside the larger ones. That is, one ray will remain from each part, and the second part will be slipped under the fold.

Another origami star

It is usually made small. For her, a landscape sheet of paper is divided into 4 parts. But you can cut each of them in half again.

Folding begins with the fact that you need to outline the middle, for this two folds are made in half. Then both corners on the left are connected to the middle. And first you need to bend the corners so that the bottom corner is on top, then unfold and fold again, but with the upper corner up. This is necessary to obtain symmetrical folds. Then also on the right.

Now everything on the left needs to be expanded and put the sheet up with this part. The lower part must be put inside. The fold is drawn along the transverse line, which was drawn at the beginning.

The left and right bottom edges of the workpiece must be folded symmetrically so that a straight horizontal line is obtained from the folds created earlier. Now the disassembled part needs to be assembled back along the previously created folds. It turns out a regular pentagon. Based on it, a three-dimensional paper star will be created.

On this figure, you need to fold and unfold the workpiece along all the vertices. You will get a picture resembling a star. It remains for her to give volume by concave inward what should be the cavity of the star.

It can already be used for decoration or decorated with ribbons.

Variant of the six-pointed star

It only takes 6 squares of colored paper to fold and a little patience. And then you get a star made of voluminous paper. The folding scheme assumes the following steps.

Fold the square in half twice. And expand. You will get a picture of four squares. All corners must be bent to the middle of the square. Then, this workpiece needs to be folded along the diagonal, but only so that they turn out on one side of the diagonal. Then they need to be unfolded and the corners bent from the middle along the formed folds outward. Do the same on the other side of the square.

Then the product is folded along the original line, so as not to fold along the one that is completely free.

The resulting triangle must be folded and unfolded. The folds are carried out so that the edge of the last fold coincides with the line from the turns that remained from the previous actions. In the middle of the triangle, the intersection of two segments will be obtained.

Now the part needs to be turned out a little along these folds. A depression will turn out in the middle, and the rays need to be sharpened by pressing them with your fingers. From six such parts, you need to assemble a star by tucking the tips into the folds of another part.

In this article, you will learn how you can special efforts make beautiful and volumetric star from paper with your own hands. A star can be not only the perfect decoration for your home on the eve of new year holidays but also great for kids. In this way, you will give the child the opportunity to understand what spatial thinking is in a good example, and besides, it will be useful for you to trace how creatively your child is developed. A white sheet of paper is an ideal place for creativity, and if it also has some thematic form, then it can be given a spectacular look with paints, pencils or felt-tip pens. Sleight of hand and a little imagination will help you and your baby create real masterpiece that will delight the eyes of your guests.

Everything you need to make a three-dimensional star with your own hands can be easily found in every home, which means that absolutely everyone can do it, so, everything that is needed:
1. A sheet of paper (you can take a plain white sheet or use colored paper).
2. Compass.
3. Ruler-protractor.
4. Stationery scissors.
5. Simple pencil
6. Paints, felt-tip pens, colored pencils (if you decide to color your masterpiece).

You need to start making a three-dimensional star by determining the base material, or rather the paper from which it will be made. There are a lot of paper options now, so you can take either the simplest landscape sheet or beautiful paper for gift wrapping. Also suitable for this purpose is the paper that is used for scrapbooking. If you use high density paper, then this craft can be used for decoration christmas tree or put on a shelf in the room as a decoration of the room.

Step one: on the back of the paper (if you are using packing paper) you need to draw a circle - this will be the diameter of the future star. The easiest way to do this is with a compass, but if the house does not have one, you can take a saucer or plate of the right size and circle it. Then you need to draw a straight line from the edge to the center of the circle.

Step two: in the next step, you will need a protractor ruler, with its help you need to mark an angle of 72 degrees and draw another straight line. So it is necessary to do along the entire diameter of your circle. You should end up with five lines.

Step three: at this stage, you need to connect all the resulting lines into a star shape. Then, in the very center of the star, you need to draw additional lines, they can be made dotted.

Step four: now you need to cut out the resulting star and fold along the guide lines (the fold must be done towards you, so your drawing will look inward). To make the fold lines as pronounced as possible, you need to work them out with a blunt object (scissors, ruler, reverse side of the knife), this should only be done if you used very thick paper.

Step five: bend the workpiece that you have turned into a star.

Volumetric star, made by hand ready, it remains only to make a loop and can be placed on the Christmas tree. If you make several stars in this way, different color, and connect them together, you get a beautiful decoration in the form of a rainbow garland.

If you experiment with the sizes and colors of the stars, you can use them as decorations for the New Year, instead of the usual and boring bows. Such elements can be fixed to each other with a thread, glue or double-sided tape and fastened to different surfaces at the desired angle.

A paper star will not only become a home decoration on the eve of the Christmas holidays, it is suitable for educational activities with children. A do-it-yourself voluminous paper star is made quite simply, while joint lessons will help develop the child's imagination and his hand motor skills.

An ordinary sheet of paper can be a suitable space for creativity. Having given it the desired shape, the craft can be decorated by painting with felt-tip pens, paints. Fantasy and sleight of hand will help the kid create a masterpiece. And how to do volumetric star from paper, this article will tell.

Necessary materials and tools

All the tools and materials that may be useful in the work can be found in everyone's home. Therefore, absolutely anyone can do this work. To create a star you will need:

• paper;
• protractor;
• compass;
• scissors;
• simple pencil;
• decorations.

Instructions for creating a three-dimensional star

They start making crafts by choosing paper. For work, you can use both an ordinary sheet, and a bright multi-colored one with your own hands can be made of durable, in this case the craft will come out quite dense, and it can be used as a decorative decoration for a room or a Christmas tree toy.

On the back of colored paper, you need to draw a circle, the diameter of which will correspond to the size of the star. For these purposes, a compass is suitable, but if it is not there, then you can use a saucer or other round object. After that, you need to draw a line from the edge to the center of the circle.

At the second stage, a conveyor ruler will come in handy. With its help, from a straight line, you need to mark an angle equal to 72 degrees, and draw a line. Thus, it is necessary to mark the entire circle - you get five lines.

The next step is to connect all the lines into a star. In the center of the part, you need to draw additional lines as illustrated in the picture. After that, the asterisk must be cut out and bent along the main lines so that the drawing looks inward. If thick paper was used in the work, then the folds should be worked on much more carefully so that they are as pronounced as possible. For these purposes, you can use any blunt object (ruler, back of a knife, etc.).

Do-it-yourself voluminous paper star is done quickly enough. Finally, you need to make a small loop to a beautiful craft could be hung on a Christmas tree or somewhere else.

double volume

This option is a continuation of the first instruction, which tells how to make one convex part. This master class will tell you how to make a double volume.

According to the previous example, two similar elements should be performed. A template for a three-dimensional star made of paper is presented below. Its difference lies in the fact that there are additional elements designed for gluing parts.

The elements cut according to the template must be shaped and glued according to symmetrical additions. It remains to wait until the glue dries, and the volumetric paper will be ready.

Star from book pages

And although this star looks very beautiful, many may not be happy with the fact that they have to ruin books. This is not necessary at all, because they can be replaced with old magazines, newspapers or technical publications.

When thinking about how to make a three-dimensional star out of paper, you should first of all take care of the materials and tools necessary for work. You will need a voluminous paper star, it can be made by following the master classes presented above. In addition, you need to prepare scissors, glue, as well as an old book.

The first step is to make a lot of paper bags. For each of them you need a paper rectangle equal to one fourth of a book page. When a lot of parts are ready, they must be glued to paper star as shown in the photo. In conclusion, a little glue should be applied to the bags and sprinkled with glitter crafts.

Do-it-yourself voluminous paper star is made quickly and easily. To make it a wonderful decoration for a room, a Christmas tree or a gift, you can experiment with colors and sizes. Such elements can be fastened together using threads, glue or double-sided tape.