How to crochet a belt for a dress. Learning to knit original belts. Type of yarn to choose for making a belt

Crochet a belt, a step-by-step selection of diagrams and a description of the work to which is attached, will turn out very quickly. We suggest crocheting the belt with columns of different heights. You can decorate the belt with flowers made of striped fabric in two colors to match the stripes on the knitted belt.

We knit a stylish crochet belt: diagram and description of work

In order to tie the belt, you will need the following materials:

Cotton yarn in navy blue, red and white color(50 g each);
Hook #3;
Fabric in red and blue stripes (size for each strip is 65 by 65 cm);
Safety pins - 2 pcs.

The pattern of this knitting option is carried out according to the principle described below.

First, double crochets are made: in the first row, the double crochet is knitted into the air loop of the gachal chain: one double crochet into the fourth air loop from the hook, in subsequent rows, the first double crochet must be replaced with three lifting air loops.

The diagram shows the knitting of motifs A and B.

Motive A: after the yarn is made, we introduce the hook by moving away from ourselves between the double crochets of the previous row and grab the leg of the left double crochet from behind, bring it out towards us, grab the working thread and stretch it behind the leg of the column, then we stretch the column with double crochet.

Motive B: we make a crochet, we insert the hook towards ourselves and grab the leg of the double crochet in front, bring it out in front of it with a movement away from us, then we grab the working thread and stretch it in front of the leg of the column, we make a double crochet.

Let's make decorative flowers. From a striped fabric, it is necessary to cut out two oblique inlays 80 cm long and 12 cm wide. Each must be folded in half inside out and along open sections. With the help of a machine we make easy assembly. Excess fabric along the line must be cut off. On the side that is sprung, it is necessary to tightly twist and sew.

We cut out two circles of 0.5 cm, tuck the slices. Sew decorative pins to the flowers.

Such a belt will be a great addition to skirts, jeans, it can be worn on a dress.

Let's try to crochet another version of the belt from the tied rings

Another very interesting option- creating a belt from tied rings.

For work you will need:

Yarn - 100g;
Plastic rings for tying;
Hook - No. 2.

Let's get to work. We will tie half of the ring with a single crochet, then we will knit a chain of 20 air loops as shown in the photo.

We will also tie half of the next ring and again we will tie a chain of air loops. Thus, we will connect the rings to the required length of the belt. We tie the very last ring in its entirety, then we knit a chain of 19 single crochets with air loops. It turns out that such a blank is made of rings tied together.

Along the edges of the belt, you can attach 4 chains made of 100 air loops, you need it for tying. The end of each chain must be secured with a knot. Here is the finished belt. crocheted with tied rings.

This belt is perfect for knitted or knitted things.

The belt is a very relevant accessory anytime and anywhere, it is stylish decoration things and without belts it is simply impossible to imagine your wardrobe.

At the end of the master class, we offer several interesting videos, in which interesting ideas crochet belts with detailed description. Try to create new and interesting things with your own hands, which will certainly delight you with their appearance.

Video on the topic of the article

We knit a stylish crochet belt: diagram and description of work

In order to tie the belt, you will need the following materials:

Cotton yarn in dark blue, red and white (50 g each);
Hook #3;
Fabric in red and blue stripes (size for each strip is 65 by 65 cm);
Safety pins - 2 pcs.

The pattern of this knitting option is carried out according to the principle described below.

The diagram shows the knitting of motifs A and B.

We cut out two circles of 0.5 cm, tuck the slices. Sew decorative pins to the flowers.

Such a belt will be a great addition to skirts, jeans, it can be worn on a dress.

Let's try to crochet another version of the belt from the tied rings

Another very interesting option is to create a belt from tied rings.

For work you will need:

Yarn - 100g;
Plastic rings for tying;
Hook - No. 2.

Let's get to work. We will tie half of the ring with a single crochet, then we will knit a chain of 20 air loops as shown in the photo.

Along the edges of the belt, you can attach 4 chains made of 100 air loops, you need it for tying. The end of each chain must be secured with a knot. So the crocheted belt with tied rings is ready.

This belt is perfect for knitted or knitted things.

A belt is a very relevant accessory always and everywhere, it is a stylish decoration of things and it is simply impossible to imagine your wardrobe without belts.

At the end of the master class, we offer several interesting videos that present interesting ideas for crocheting belts with a detailed description. Try to create new and interesting things with your own hands, which will certainly delight you with their appearance.

Video on the topic of the article

Greetings! It happens that you need to crochet a simple belt for a dress or skirt. In such cases, this post may be useful for beginners))

The belt knits simply and quickly. Easy to measure and easy to decorate. If you like it, I'll be glad.

For this description, I specially photographed against a bright background.

In general, the belt got in touch when I was picking up something suitable with a peplum and a tight skirt. I had to try dozens different options- factory tapes and straps, knitted and woven belts. In the end, I decided to knit a simple ribbon-belt from "fans".

We knit a belt

Dimensions: belt 48 x 3 cm, + length of laces 17.5 cm.

Legend:

P (loop),

VP (air loop),

SP (connecting p),

RLS (single crochet),

PSSN (half double crochet) - double crochet, insert the hook into the loop, pull out the thread and knit all three threads on the hook together.

Loin mesh (* 2 P SSN, 2 VP *, skip 2 loops of the previous row, repeat * *).

"Fan" - 5 CCH in one "arch"

What I needed:

pekhorka yarn "Successful", 50gr/220m, white;
hook number 1.75;
buttons with a diameter of 1 cm - in the amount of 8 pieces;
sewing needle and white thread for sewing on buttons.

You can pick up other threads / hooks for them and decorate the belt to your taste.

I used mother-of-pearl plastic flower buttons for decoration. Sold in a set of 20 pieces. They are flat in shape, i.e. holes for sewing are located not like on buttons - in the center or on one of the sides, but along the side walls. It is very handy for sewing. Yes, and they lie better, more tightly adjacent to the product.

Brief instructions for calculating the size of the belt

The belt consists of the main - wide part adjacent to the product. And a narrow lace that regulates the volume (length of the circumference).

This means that the set of loops is intended for the wide part of the belt. Therefore, it is necessary to dial so that the ends of the belt do not converge "butt". Otherwise, you will have to tie it not with laces, but with the belt itself (an unsightly thick knot will appear). For a lace at the end of knitting, “airs” are separately obtained (that is, they are not included in the typesetting row).

We calculate like this:

1 If it is possible to try on, pick up a chain from the VP and attach it to the waist / hips (where you plan to wear the belt) with the expectation that the belt is 10 centimeters shorter in size.

2 When knitting to the finished skirt / dress, subtract 10-15 loops from their total number in the product. Let's say I had 132 loops on the shelf in my dress. Therefore, I scored 10 loops less, now the belt pulls the dress together and is tied with laces.

Description of knitting a belt

I scored a "chain" of 122 VPs. I knit in a spiral.

1 p: VP, 122 P SSN = 122 p. (we do not include the air loop in the bill)

2 p: VP, " sirloin net» to the end of the row. Continued on the opposite side of the belt symmetrically. On each side, 30 arches were obtained (60 in total).

I unfold knitting, i.e. I knit in the opposite direction.

3 p: VP, SP into the jumper between two P SSN before. row, 1 "fan" in the arch of 2 VP previous. R*.

She continued around. I finished with 2 joint ventures in the side loops, I don’t cut the thread.

Laces

I scored from the edge where I finished knitting the belt, a “chain” of 50 VPs. I knit in the opposite direction (i.e. towards the girdle): VP, 50 PSSN. The ends of the thread were fastened and cut off.

I tied a thread from the other end of the girdle and repeated in the same way. The ends of the laces themselves begin to twist slightly "lamb"))

I reprimanded 8 “fans” from the edge, sewed flower buttons every two “shell fans”. On the opposite side, the same number of free fans remained.

I needed a plain belt. Although, of course, it looks even better from bright yarn. Having a ready-made description at hand makes it easier to experiment and create. For what, in fact, it is prepared.

I wish you light eyelets and cheerful mood!

Sincerely, Saule Vagapova

Seal

Knitted accessories are becoming more and more fashionable because they can be combined with clothes made of almost any material. There are especially many options for crocheting a belt. The patterns and descriptions are sometimes so simple that even a completely inexperienced knitter can handle them. In addition, time and material costs are quite low, which is undoubtedly a plus when creating this spectacular and elegant yarn product.

With the help of yarn and a hook, you can knit a huge variety of belt options: narrow and wide, made of dense fabric and lace, solid knit and motifs. The main thing is to determine in advance whether an accessory or pants will be worn on the dress, choose the appropriate color and yarn quality so that the future belt is in perfect harmony with the outfit, complementing or refreshing it.

Ribbon lace

Ribbon lace is a very popular knitting method. With it, you can knit anything: a tippet, a tablecloth, a dress, etc. It can also serve as a decoration finished product. The easiest and fastest, of course, is to knit ribbon lace belts that require very little yarn. But, despite this, such a belt will look great on summer dress or tunic, it can be worn through the loops of trousers or jeans to add a twist. Consider the easiest way to create a narrow belt using the ribbon lace technique.

This product uses fairly dense yarn, but you can choose threads of medium thickness and thin ones. At the same time, the width of the belt itself will also decrease. The thread will need only 10 g.

To get such a belt, follow this description:

We knit a chain of 4 air loops.
We knit 5 columns without a crochet in the second loop of the chain.
In the last loop we make 1 single crochet.
We turn the started product with the reverse side and tie 1 loop for lifting.
In the second single crochet we knit 5 of the same columns.
We knit 1 more single crochet in the third column.
We rotate the product again.
We continue to knit, repeating the sequence.

In conclusion, we sew ties to the girdle, which may look like just threads or laces and ribbons. At will we decorate the product with beads or sequins.

You can find many similar knitting options for both narrow and wide belts. In the video below, only a fraction of the ways of this type of knitting:

Crochet strap

You can crochet not only belts to decorate and complement the image, but also practical products designed to be worn on jeans and trousers in order to support them. Such straps are made of very hard and thick threads, so that later, when worn, the belt does not stretch and lose its shape, and they need to be knitted in a certain way:

A row of single crochets is knitted.
Next, the canvas is turned over to the other side, and another row of single crochets is made, tying the previous one. It turns out a canvas from double columns without a crochet.

Also, these straps are suitable for skirts made of thick fabric.

Rings on the belt

A belt made of tied rings looks very impressive and original, which will add individuality and creativity to your image. This piece will go with almost any outfit. It will perfectly complement your dress or tunic, skinny jeans or classic pants, a strict office shirt or a loose light blouse.

To knit such a belt you will need:

100 g of yarn.
hook suitable for the selected threads.
plastic rings.

Plastic rings can be purchased at a craft store or you can make your own. The main thing is that they are dense and do not lose their shape.

Consider the method of self-manufacturing rings:

On plastic (the top from plastic folder) using round stencils of the desired diameter, draw a circle in a circle. One stencil should be larger, the second smaller to make rings.
Cut out the required number of circles with scissors.

Then you can start shaping them. To do this, you must first tie half of the first ring with a single crochet from the center of the ring. You should get about 12 columns.

Having tied half of the circle, we attach the next ring to it and also tie half.

Thus, we collect all the rings to get a chain equal to the volume of your waist. After attaching the last ring, you need to tie it entirely in a circle and continue to tie the remaining rings, not forgetting to make connecting loops at the end of the element in the first single crochet of each circle.

When the main part of the belt is ready, you can sew braid or ties to it.

Rings can be connected both as shown in the previous photos, and with the help of a patterned canvas or motifs.

To tie such a belt, you need to, in the same way as in the previous master class, tie the first ring up to half with single crochets, then tie a chain of 20 air loops, tie the next ring and continue knitting in this way until the length of the product is equal to the volume your waist.

The final ring must be tied in its entirety and begin to knit the pattern you like, connecting all the circles.

Video on the topic of the article

If you are thinking of knitting an original belt that no one else has, we suggest you watch the following videos:

Often knitted belts can be not only an obligatory part of a homemade coat, cardigan, sundress or elongated sweater, but also a completely independent accessory that will complement the image favorably and give it individuality. The main thing is to maintain and complement the overall style of your outfit. First you just need to decide on the general appearance of the product.

Knitting belt

There are many ways to knit a belt with knitting needles. There is nothing archaic in this. In this article, we will not give examples of the implementation of specific products with diagrams.

We will only try to give you a general idea of how and which belts can be knitted with knitting needles.

Knitting accessories

So, if you have straight and double-pointed knitting needles, as well as yarn, you can already try to knit a beautiful belt for yourself. Depending on what kind of belt you want, you can additionally purchase an elastic band, a ribbon or a strip of fabric, a buckle if your future belt requires it.

Belt - ribbon

To begin with, we advise you to remember that the belt can be made as a regular ribbon of arbitrary width and length, tied with an elastic band. Such a belt-ribbon can simply be tied around the waist, tying it to a pillow knot or a one-sided bow.

Belt - ribbon

You can knit a wide ribbon of coarse yarn with knitting needles, providing it with voluminous patterns. On a similar product will look good voluminous braids, ovals or rhombuses. Made vertically, when the product is located at the waist, they will lie horizontally. It would be desirable to supplement a belt of such a plan with a buckle that is suitable in style.

A belt decorated with a braid pattern can be additionally decorated with a satin or silk ribbon of a suitable color, twisting the finished pattern with it. In addition, it is advantageous to emphasize the beauty and individuality of the product with the help of beads, artificial stones and other decor.

Belt with double-sided stripe - harness

The next version of the belt with knitting needles, which we present to you, is a double-sided strip-harness. It can be knitted with open or closed edges. At the same time, a strip-harness with open edges can be further strengthened by threading a ribbon, cord or elastic band inside.

Making a viscous strip with closed ends

Such a belt is made with double knitting.

To make a strip with closed edges, you need to dial an even number of loops on the knitting needles. Work begins with knitting the first loop of the front and then every 2nd loop must also be knitted on the face. Remove the remaining loops without knitting on the working knitting needle. We draw your attention to the fact that untied loops are purl. They must be removed accordingly so that the working thread is in front of the loop being removed.

The row should end with a purl.

The next row and all subsequent ones repeat the first one: you need to start knitting from the front, and finish the row with the wrong side, that is, an unknitted loop.

So it is necessary to continue until the intended length of the product is reached. Then close all loops.

Strip - a tourniquet with open ends

To make a strip with open edges, it is necessary to immediately distribute the loops cast on at the beginning of work equally into two knitting needles, which are parallel to each other.

The third spoke is working. In the first row, it is necessary to knit the first loop from one knitting needle and remove the loop from the second knitting needle as a wrong side (working thread in front of the removed loop).

By the end of the row, all loops will be on the working needle.

Further knitting can be continued in the same way as when making a closed strip-tow. Before closing the loops, it will be tedious to distribute the loops again on two knitting needles. On each knitting needle, close the loops separately.

Another version of the belt, which must be done in double-sided knitting. It can be done using ordinary straight knitting needles. This knitting method is very suitable if you want to make a belt with a jacquard pattern.

Work process

In order to get started, you need a thread of two balls different color(for example, black and white) to connect together and dial the estimated number of loops on the knitting needles with this kind of double thread, which will be working. In the first row, all white loops must be knitted on the face with a white thread, and black - on the inside and with a black thread.

Belt with double-sided knitting - knitting process

Turning the work, knit it the other way around: black loops with knit and black thread, and white loops with purl and white. Having knitted 3-4 rows in this way, you can start knitting a pattern.

In this case, you need to carefully monitor the alternation of colors. After a dozen rows, the pattern will be clearly visible on both sides.

A belt made in this style can be knotted at the waist or equipped with a beautiful buckle that matches the style.

Slim cord belt

The next option that we will offer you is a thin cord belt, hollow inside. Knitting it with knitting needles is also quite simple. It is enough to have a pair of double-edged knitting needles in stock.

Beginning of knitting

To get started, you need to dial on the knitting needles from 3 to 6 loops. Knit all cast on stitches and move the work to the right edge of the needle. Having wound the working thread from left to right, again knit all the loops on the face, move the knitting to the right edge ... Continue in this way until the cord of the desired length is ready.

End of knitting

At the end of knitting, all loops can be closed and the ends of the product can be decorated simply by tying knots on them. Simple and at the same time - original. For extra strength, you can optionally thread a strong cord inside such a belt.

Weaving a round belt-cord

We cannot fail to mention one more way of weaving a round cord belt.

Knitting accessories

To complete it, you will need only one knitting needle, as well as a simple device that can be purchased at a specialized store or you can make it yourself. The second is much simpler, based on the fact that you yourself can make such a device for weaving a cord belt of any thickness, designed to work with any yarn.