Do you know why shirts need a loop at the back? Why do they make a loop at the back of a shirt? Additional eyelets on sneakers

Have you ever wondered why shirts need a loop at the back?

leangarments.com

There are several versions, and now we will tell you about them...

Let's start with the cut. This loop usually tops what is called a bow pleat, which runs from the back yoke to the bottom of the shirt. The folds formed are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail when useful element cut.

There is one more romantic version the origin of this loop. It's hard to imagine now, but once upon a time Men's shirts looked and wore completely different. In those days the shirts had detachable collars, which were starched so that they literally stood up and were worn tightly buttoned. Ties back then were more like scarves that had to be secured in some way, so this loop was probably made just for this purpose. But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But on modern shirts there is a button at the back, just so that the tie can fit into it. modern form I didn’t go anywhere.

AND last option from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities. The direct purpose of the loop is to hang a shirt in a locker in a sports locker room so that it does not wrinkle.

This version also has an indirect meaning - it is a designation of the status of personal relationships. If a young man who studied at Harvard, for example, was dating a girl, he would remove this loop as a sign that he was busy. And his chosen one, in turn, began to wear his college scarf. This is exclusively student symbolism, but nevertheless, a rather interesting fact.

Have you noticed that many shirts have a loop like this at the back? Have you ever wondered what it is for? In fact, there are several versions, and now we will tell you about them.

Let's start with the cut. This loop usually tops what is called a bow pleat, which runs from the back yoke to the bottom of the shirt. The folds formed are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail with a useful cut element.

There is another, more romantic version of the origin of this loop. It’s hard to imagine now, but once upon a time, men’s shirts looked and were worn completely differently. In those days, shirts had removable collars that were starched so that they literally stood up and were worn tightly buttoned. Ties back then were more like scarves that had to be secured in some way, so this loop was probably made just for this purpose. But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But on modern shirts there is a button at the back, just so that the tie in its modern form does not move anywhere.

And the last option is from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities. The direct purpose of the loop is to hang a shirt in a locker in a sports locker room so that it does not wrinkle.

This version also has an indirect meaning - it is a designation of the status of personal relationships.
If a young man who studied at Harvard, for example, was dating a girl, he would remove this loop as a sign that he was busy. And his chosen one, in turn, began to wear his college scarf. This is exclusively student symbolism, but nevertheless, a rather interesting fact.

Why do you need a loop on the back of a shirt? August 3rd, 2017

How did we figure out seemingly obvious things, for example? Or for example, do you know or

But let's return to our loop. Remember this one?

I can tell three completely plausible versions on this issue.

Let's start with the cut - this loop is often crowned with a bow pleat (in English, by the way, it is called a box pleat - both the bow and the lid of the box can be seen in it, if desired), which descends from the yoke on the back to the bottom of the shirt. Folds are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail with a useful cut element.

There is also a romantic version from the times of detachable collars, and perhaps even before them. Now it’s hard to imagine, but once upon a time men’s shirts looked and were worn completely differently - when removable collars were starched so that they literally stood up and were worn tightly buttoned, then ties were more like scarves that had to be fixed somehow, so perhaps this They started making a loop just for this purpose. But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But for the foreseeable future, a button is regularly found on the back of the shirt collar, just so that the tie in its modern form does not move anywhere.

And the last option is from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities.

The direct purpose of the loop is to hang the shirt in the locker in the sports locker room so that it does not wrinkle. Although for some reason I have never hung a shirt this way

Later, these loops became part of student culture. Students used them to indicate whether they were in a relationship with someone. Men cut off the loop to show that their hearts are occupied serious relationship, and the girls, in turn, wore the scarf of their chosen one.

sources

Have you ever wondered why shirts need a loop at the back?..

There are several versions, and now we will tell you about them...

Let's start with the cut. This loop usually tops what is called a bow pleat, which runs from the back yoke to the bottom of the shirt.

The folds formed are one of the types of darts and are necessary for freedom of movement and at the same time for the fabric to fit along the natural lines of the body. So we can consider that this is a successful decorative detail with a useful cut element.

There is one more romantic version the origin of this loop. It’s hard to imagine now, but once upon a time, men’s shirts looked and were worn completely differently. In those days, shirts had removable collars that were starched so that they literally stood up and were worn tightly buttoned.

Ties back then were more like scarves that had to be secured in some way, so this loop was probably made just for this purpose.

But the manner of depicting people from the back came into fashion much later, so there is no sufficient evidence. But on modern shirts there is a button at the back, just so that the tie in its modern form does not move anywhere.

And the last option is from recent history. In the early 1960s, GANT began making shirts with this buttonhole, which became instantly popular among students from Ivy League universities. Direct purpose of the loop - hang up a shirt in the locker in the sports locker room so that it doesn’t get wrinkled.

This version also has an indirect meaning - it is a designation of the status of personal relationships. If a young man who studied at Harvard, for example, was dating a girl, he would remove this loop as a sign that he was busy.

And his chosen one, in turn, began to wear his college scarf. This is exclusively student symbolism, but nevertheless, a rather interesting fact.

Button loops on women's clothing performed on the right shelf or on the left side of the back. Loops on men's clothing- on the left shelf or on the right side of the back. If the fastener is located on the side, then the loops are always made on the front part.

Modern sewing machines are equipped with special automation for fast and easy buttonhole sewing. In addition to buttonholes that are sewn by machine, there are also buttonholes that are sewn by hand: linen buttonholes, eyelet buttonholes, tailor’s buttonholes, and especially beautiful overcast buttonholes.

It doesn’t matter which loop you choose for your product, but be sure to When processing loops, consider the following:

■ On fastener strips or their imitations, the loops must be vertical and located in the middle of the straps. All other types of fasteners have horizontal loops. To finished product the button is located exactly in the middle of the clasp, start the loop approx. 2 mm to the center line.

■ The pattern has markings for the location of the loops. The length of the loop must be marked in accordance with the diameter of the button. In this case, the finished length of the loop is equal to the diameter of the button plus its height.

■ Before making a buttonhole on your finished garment, try sewing it on a piece of the exact same fabric.

Linen loop

To make linen loops, the fabric must be folded in half and reinforced gasket or folded in three layers. The length of the loop is marked on front side fabrics. Sew ordinary threads, and when thin fabrics Threads are used for machine embroidery and darning. To achieve a strong overcast stitch with uniform stitch heights, machine stitching needs to be done around the buttonhole markings.

Cut the loop in the middle, making sure not to cut the stitches at the ends of the loop (1). Protect the edges of the cut from fraying with oblique overlock stitches (2). Then sew the loop with a buttonhole stitch. Run the seam from left to right, this is the most convenient way to work. Insert the needle behind the edge of the loop from the wrong side (3). Pull the thread, leaving a small loop. Insert the needle into the loop from back to front (4). Tighten the thread. The resulting nodule should lie exactly on the edge of the incision.

When one side of the loop is sewn, tack at the end. To do this, sew the fabric several times with double-height stitches (5) and wrap these stitches tightly around them, slightly catching the fabric (5a). Then sew the other side of the loop in the same way and make another fastening at the other end of the loop. Fasten the end of the thread to the wrong side of the fabric.

Loop with eye

Horizontal loops, for example on blouses, are made with an eyelet.

This loop differs from a linen loop in that the front end of the loop is rounded. To do this, the front end of the loop is overstitched with stitches diverging in the form of a fan. The knots on the curve are slightly pulled up (6). At the other end of the loop, a tack is made.

Tailor's loop

Tailor's buttonholes are used on jackets and coats. To make the loop more flexible, it is overstitched with special threads, placing a thin cord inside the overstitching.

Mark the length of the loop on the right side of the fabric. Cut the loop and finish the front end of the cut (where the button will be) with an expanding wedge or circle punched using a hole punch.

Protect the edges of the cut from fraying with oblique overlock stitches, rounding them off at the front end. Stretch a string (7) along one edge of the cut. Then, at the end of the loop, start overcasting with a loop stitch, insert the needle behind the edge of the loop from the wrong side. Place the thread behind the point of the needle, then pull the needle (8) through the thread. Pull the thread tightly. The knot should lie on the edge. At the rounding of the loop, also stretch the lace and pull the knots up a little. After processing the rounding, stretch the lace along the other edge of the loop and sew it in the same way.

At the end of the loop, fasten (as on a linen loop). At the end, pull the lace tightly again, straightening the “eye” with an awl, and sew the lace on the wrong side.

Machine sewn buttonholes

Modern sewing machines are equipped with automation, with which they can make not only linen buttonholes, but buttonholes with an eye. You will find more detailed information in the instructions for your sewing machine. However, even on a regular sewing machine, without special automation for sewing buttonholes, you can sew buttonholes with a zigzag stitch.

THIS IS DONE AS follows

Mark a loop on the right side of the fabric. Use a machine to sew a tight zigzag stitch with a stitch width of 2mm. Place the needle in the left position and stitch the left half of the loop. At the end of the stitch, return the needle to the middle position, increase the stitch width by 2 times and make 3-4 stitches for fastening. Reset the stitch width to 2mm. Using a hand wheel, insert the needle into the center of the bartack. Raise the foot and turn the fabric with the needle around the needle. Lower the paw. Raise the needle, move it to the right position and sew the second half of the loop. Attach the end of the loop. Cut the loop in the middle.

How to sew a button

Basically, buttons are divided into two types: buttons with a foot or metal loop and buttons with two or four holes for sewing.
Sewing on buttons with holes, they always make a “leg” from threads. Only decorative buttons are sewn without a “leg”, because buttons, as a rule, are intended for fastening clothes.
Places for sewing buttons are marked in accordance with the location of the loops on the product.

Marking the location of buttons

Pin the sides of the fastener, aligning the lines of the middle so that the side with the loops is on top. At the front/top end of the loop, insert a pin vertically into the bead below. Carefully remove the loop from the pin upwards and secure the pin to the side. The place where the pin is inserted is the place for sewing on the button (1).

Sewing on a button

It is sewn on with double regular or special thread for sewing on buttons. To prevent buttoned buttons from being pressed into the bottom side, they are sewn “on the leg”. The height of the “leg” depends on the thickness of the fastener side. With your left hand, hold the button at the required distance above the markings on the bottom edge (2). It will be easier to sew on a button using a match (3). The match is removed before wrapping the “leg” with thread. Having twisted the “leg” (4), the thread is pulled to the wrong side and secured. Buttons that must be sewn especially firmly are sewn with a subbutton on the wrong side of the product (5).
Buttons with a stem or a metal loop, as well as decorative buttons, are always sewn on without a “foot” made of thread.