How to iron a men's long sleeve shirt. How to iron men's shirts correctly

Did you know that according to statistics, the average person spends 350 days of their life ironing? We spend almost a whole year smoothing wrinkles and frills, steaming tablecloths and napkins. But, for sure, most of this time is spent on ironing shirts. "How to iron a shirt?" - this question can serve as a test to determine the skill of a real hostess.

Ironing a shirt correctly is an art. Let's share little tricks that will help turn a tedious process into an easy and labor-intensive task.

First, you need to prepare workplace. It's just great if your iron is equipped with a steam generator, and your ironing board has a special device for ironing sleeves. This saves a lot of time. If you have an ordinary iron, you will have to arm yourself with sprays and a sprinkler.

How to iron a shirt

1. We prepare a shirt. It is easier to iron shirts when they are still damp. If the laundry is dry, be sure to moisten the material. You can use special sprays that contain starch. Then your shirt will keep an attractive look and freshness for a long time. If a spray is not available, plain water from a spray bottle will do. After dampening the shirt, put it in a bag for a while or wrap it in a clean towel so that the moisture is evenly distributed throughout the fabric.

• Little trick: rayon shirts should not be splashed with water, because drip marks will remain. It is better to wrap such a shirt for a few minutes in a damp terry towel.

2. Start the ironing process with small details: collar, cuffs, pockets, female models- frills, frills, lace.

• Little trick: Many people are accustomed to starting ironing shirts from the collar. But this is not entirely practical. By the end of the whole process, the collar is wrinkled again and has to be smoothed out additionally. The fabric on the collar is already the most subject to abrasion, and too much ironing will only reduce the life of the shirt.

So, first we smooth out the cuffs. It is better to do this from the wrong side to avoid the appearance of a lasa. On the front side, it is worth smoothing only those cuffs that need to be worn with cufflinks. In this case, turn the sleeve right side out, fold the cuffs and iron carefully, avoiding the appearance of transverse folds.

Then unfold the sleeve with the seam up and iron, gently steaming the armholes, the seam and the folds near the cuffs.

After that, fold the sleeve along the seam and smooth it on both sides. We do the same with the second sleeve.

Arrows on the sleeves: a stylish solution or bad manners?

To do or not to do arrows on the sleeves - there is no definite answer. Someone thinks that arrows are a manifestation of bad taste, others argue that a shirt with arrows on the sleeves keeps a neat look longer.

Some designers suggest fashion shirts with arrows for business people, but shirts in a sporty style or casual style it is better to iron without arrows.

The only thing that stylists agree on is the presence of arrows on the long sleeves of military uniform shirts.

Arrows are completely unacceptable if you are going to iron women's shirt unless it is a military uniform.

So, whether to display arrows on the sleeves or not is a matter of taste and habit.

3. We iron the yoke and shoulders. Lay the shirt on the ledge of the ironing board and gently iron the shoulder seams and the yoke of the shirt. It is unacceptable to iron the arrows on the shoulders.

4. We smooth the floors and the back. Unfold the shirt carefully and carefully iron the floors and back. Particular attention should be paid to pockets (if any) and the space between the buttons.

• little trick: If the shirt is light, then you can iron on the front side. Shirts dark and bright colors, shirts with embroidery and prints are ironed inside out only. This will help keep the saturation of colors longer.

5. Iron the collar. Unfold the collar back side up and iron, slightly stretching the fabric, first the lapel of the collar, then the stand. Fold the collar along the seam and iron along the fold line. To avoid the appearance of shine, on the front side of the collar should be ironed, only lightly pressing the iron.

After you have finished ironing a men's or women's shirt, be sure to hang it on a coat hanger so that the product is completely dry and does not lose its shape. It is more convenient to store ironed shirts on a coat hanger in a spacious closet.

• Little trick: Having bought a new shirt, do not rush to throw away plastic racks. You will need them if you prefer to fold your shirts. Such racks better retain the shape of the collar.

A few tips on choosing a temperature regime

It is best to follow the instructions on the label that is on any product when choosing the temperature of the iron. Manufacturers always indicate what temperature is acceptable for ironing. Otherwise, please refer to the following guidelines:

100% cotton requires 150 degrees and wet steam;

For polyester shirts, the temperature is not higher than 110 degrees;

Linen fabric should be ironed damp, at an iron temperature of 210-230 degrees, with an abundance of steam and with strong pressure on the iron;

A viscose shirt will smooth out at 120 degrees. By the way, such a fabric does not have to be pre-wetted;

Silk fabric requires special care. Select the minimum temperature setting and iron through thin fabric or gauze to avoid the appearance of lasa from the iron.

Now you know how to iron a shirt correctly and quickly.

Some people find ironing difficult because they don't follow the basic rules. Burnt fabric, unsmoothed folds and creases, broken or torn off buttons after dry cleaning, do you recognize yourself?

Then this article is for you. The first thing to keep in mind is that the composition of the fabric determines the way you iron.

The combinations on the iron will help you achieve the perfect heat setting. Secondly, you need to use an ironing board to iron your clothes.

In addition, clothes should be ironed so that wrinkles are removed and new ones do not form. Below are tips on how to iron a shirt using correct technique.

Proper ironing of men's shirts is performed in the following sequence:

1. The ironing process begins with the collar because it is the most visible part, especially when worn with a suit. To iron the collar, you need to unscrew it and start from the bottom, and then, slowly pressing the iron, draw it from the corners to the center. The next thing to do is turn the shirt over and repeat the process on the other side of the collar;
2. cuffs, when worn with a suit, are the second visible part of the shirt and require a lot of attention. Just like the collar, they are first ironed on the inside, then turned over and ironed on the outside. When ironing the cuffs, you need to be careful not to iron over the buttons;
3. the front of the shirt. To iron the front part, you need to start from the side on which the buttons are located, gently pressing the iron around the buttons;
4. back. To properly iron the back of a shirt, place the back of the shirt on the ironing board so that one shoulder is placed on the tapered edge of the ironing board, this helps to keep the back in position for ironing. The same must be done by changing the sleeve and ironing the second part of the back;
5. sleeves. Sleeves are the hardest part of ironing a shirt. The problem with sleeves is that without a special board with a cutout for the sleeve, you will have to iron two layers, so you need to be careful and make sure that the fabric lies flat.

Ironing modes for shirts by type of fabric

Cotton shirts

Cotton items should be ironed slightly damp, spraying water on the part that is being ironed. You need to work with the iron longitudinally, and not in circular motions, so as not to damage the material.

• A 100% cotton shirt will require a temperature in the range of 130-160 degrees with strong pressure and wet steam;
• from crinkled cotton - 110°C and without moisture;
• a cotton item with linen will require a temperature of 200 ° C and wet gauze with strong pressure;
• For cotton with synthetics, 100°C with low steam will suffice.

Polyester

For them, you definitely need to use gauze or thin cotton fabric to avoid contact of the soleplate with the fabric, because polyester is an extremely heat sensitive material.

To iron such a thing, you need at a temperature of no more than 80 degrees with light pressure to avoid melting the fibers and using weak steam.

Linen shirts

Chiffon and silk shirts are ironed at a temperature not exceeding 70°C without moisture or steam.

Viscose and knitwear- 120 and 80°C respectively using gauze and low steam. It is necessary to iron things from these materials from the inside out.

For thicker fabrics, ironing both sides of the fabric will give the best results, and you can also find out what temperature to iron your shirt at on the garment label.

If there is no tag, the temperature regime can be determined independently by setting the minimum temperature and increasing it until the wrinkles begin to smooth out.

Dark-coloured garments, regardless of material, should always be ironed inside out to avoid the sheen caused by the iron.

Preparing the shirt for ironing

• The shirt should be ironed only after washing, as some impurities after processing the item with an iron will forever remain in the fabric;
• if on your washing machine there is an “easy ironing” function, then use it;
• do not wait for the complete drying of the thing, let it be slightly damp. If you nevertheless undertook to iron a dry shirt, then it is better to moisten it with a spray and briefly (for 10 minutes) place it in a bag or wrap it in a towel, this will help it to moisten equally throughout the fabric;
• on the label, study the information about the shirt and adhere to the indicated temperature regime, which is necessary for the material;
• on the collars of men's shirts in small pockets there are plastic bones, the so-called clamps, they must be removed before ironing, but it is better to do this before washing.

How to iron a long and short sleeve shirt

The basic principle to be followed is that small and double details are the first to be ironed.

Taking advantage next instruction, in the above sequence, you can perfectly iron a long-sleeve shirt and leave no wrinkles on the already ironed surface.

1. Gate. Its fold does not need to be ironed, it should be natural.
2. Cuffs. First, the wrong side is smoothed, and then the front side.
3. Sleeves. First of all, the seam is smoothed, and then the sleeve itself.
4. Shelves. It is necessary to avoid bends on the pockets and carefully bypass the buttons.
5. Back. Move the shirt across the board to help iron the back from one seam to the next.

Short-sleeved shirts are ironed in the same way, only a little faster. The sleeve must be pulled over the narrowed edge of the ironing board or on a special undersleeve and ironed from all sides.

How to iron a shirt collar

It is desirable to iron the collar of a man's shirt moistened. You should start from the back side from the corners of the gate to the center.

Also smooth the front side. You need to iron without pressure so that the fabric does not move to the sides, forming folds.

How to iron a shirt collar so that it stands up?

It depends on the fabric. With a good density of the material, it is enough to simply smooth it on both sides, if the fabric is soft, you can starch the collar with a solution, dry it and iron it in the desired shape.

Ironing sleeves

You need to iron the sleeves of the shirt without arrows. It is done like this:

1. the sleeve is folded in half, seam up and it should be located in the middle;
2. the seam is smoothed, the sleeve is turned over and also ironed;
3. the sleeve is folded along the seam, and ironed from it to the edge, starting from the shoulder and down.

Do you need arrows on the sleeves

Many people wondered: is it right to iron shirt sleeves with or without arrows? According to etiquette, it is customary to wear a shirt without arrows.

But if a person does not plan to take off his jacket, the arrows on the shirt are acceptable. From this it follows that the arrows on the sleeves are in bad taste.

Ironing the yoke and shoulders

The shirt is stretched on the ironer, its tapered end, with the collar towards the board, the fabric is straightened.

The shoulders and yoke are ironed parallel to the collar. The seams connecting the shirt with the collar, as well as the armholes, are ironed.

Ironing shelves and back

We put the shelf on the board, shoulder to the narrowed part. You need to start ironing the shelf from the front side. From the bottom up, the places between the buttons are ironed.

Then the iron needs to move to the side seam and back. The last turn, the left shelf is ironed.

How to iron a shirt without an iron

Consider such tricks as the ability to smooth a shirt without an iron.

Method number 1 - Wet hands

If the thing is not too wrinkled, you can smooth out the wrinkle with wet hands by running your hands over the fabric from top to bottom. Then shake the shirt and let it dry. Linen products are well suited to this method.

Method number 2 - Steam bath

Hang your clothes on hangers in the bathroom and turn on the hot water, close the bathroom door. The water must be so hot that steam is formed, since it is under the action of steam that irregularities go away. The fabric will be smoothed out in 15-20 minutes. Splashes of water should not fall on the thing.

Method number 3 - Put it on yourself

Wear a wet shirt over your body. The tension and body heat will smooth the fabric.

Method number 4 - Leveling mortar

A solution of vinegar and fabric softener is added to the water 1:1:1. Shake the resulting solution and spray the surface of the clothing. Then dry it, preferably outdoors. With synthetics, the method does not work.

How to fold a shirt no matter how wrinkled it is

If you fold your shirt correctly, you won't need to iron it again. This is much easier than it might seem.

1. you need to put the shirt with the buttons down;
2. the sides fold from shoulder to shoulder;
3. sleeves fall on the side of the shirt towards you;
4. the bottom of the shirt is wrapped, forming a neat rectangle upwards.

Iron alternative

Of the unusual methods for removing wrinkles on things, the following can be noted:

steam generator

This device is quite similar to an iron, but differs in the specifics of its work in that it constantly supplies dry steam with a powerful jet. Able to smooth out quite wrinkled things.

Steamer

The steamer removes wrinkles by supplying hot steam, and at the same time disinfects the item. You can iron in a vertical position. However, not all fabrics are suitable for this method.

Paromanequin

The ironing robot steam mannequin, in the form of a human torso, is designed for quick drying and smoothing all clothing that is worn on the torso.

The better to iron shirts with a steam generator or a steamer depends on the frequency and amount of poorly ironed (complex, unusual cut, decor on things) clothes. The first option is preferable.

Useful Tricks

• Men's shirts need to be ironed on the front side.
• If you can’t smooth the item, moisturizing and pressing hard on the iron will help.
• Difficult-to-smooth fabrics can be softened with a solution of fabric softener, water, and starch.
• The print on the product or embroidery must be ironed from the inside.
• For easy and efficient ironing, shirts can be hung to dry by the hanger and ironed when damp.
• To avoid wrinkles on knitwear, it is better to store such products on a roller.

It is unlikely that there will be many people for whom ironing shirts is a favorite pastime. Meanwhile, this, such a familiar and necessary wardrobe item, can tell a lot about its owner, because they are greeted by clothes. A man in a wrinkled or clumsily ironed shirt, especially with a long sleeve, often causes distrust, and as a specialist, carelessness in clothes is involuntarily associated with carelessness in work. To prevent this from happening, it is useful to learn how to iron them quickly and correctly.

Where to begin

So, in front of you is a pile of shirts that need to be given an impeccable look.

Iron heating modes

Modern irons are equipped with a temperature controller. The ironing modes on them are indicated by dots, on some the type of fabric is additionally indicated.

• one point corresponds to temperatures up to 110 0 С;
• two points - up to 150 0 C;
• three points - up to 200 0 С.

Table of ironing modes for different types of fabrics

If the label is lost and you do not know the composition of the fabric, set the minimum temperature, gradually increasing it until the fabric begins to smooth out. Add gradually. As soon as you feel that the iron has become less slippery, lower the temperature and let the appliance cool down.

Prepare everything you need for ironing.

What you need

• iron;
• ironing board or table covered with a thick cloth;
• attachment for ironing sleeves;
• spray;
• for some products you will need a mesh or fabric.

Necessary accessories for successful ironing - gallery

The steam function of the iron makes ironing much easier. Ironing board - a convenient device for ironing things Sleeves are much easier to iron with a sleeve A spray bottle is needed to moisten dry tissue

Preparing a shirt for ironing

Having prepared everything you need, proceed to ironing.

Proper ironing of various types of shirts with long and short sleeves

The most difficult thing, perhaps, is ironing men's shirts. Having learned this wisdom, it will not be difficult to cope with other shirts.

Men's shirts

There are different opinions about the order of ironing. General rule- first iron small and double parts.

Professionals advise starting with the collar.

First, small and double parts are ironed, you should start with the collar

Stage 1 - Collar

Once you've finished with the collar, move on to the sleeves.

Stage 2 - Sleeves

Ironing the sleeves also start with double details - cuffs.

Advice! To avoid "arrows", iron the center part first, and then fold the sleeve and lay it on a table or board so that the fold hangs over the edge. Then, when ironing, the iron will not touch it.

Stage 3 - Shoulders and Yoke

Stage 4 - Shelves and back

Immediately hang the ironed shirt on a coat hanger and fasten the top button so that wrinkles do not form on it. Do not put on clothes right away, let it cool down and “rest” a little, otherwise the thing will quickly wrinkle.

Video instructions for perfect ironing men's long sleeve shirts

Short sleeve shirts are ironed in the same way. The sleeve is pulled over the narrow edge of the board or undersleeve and ironed from all sides. Instead of a sleeve, you can use a rolling pin wrapped in a towel, or a roll of tightly folded fabric.

How to iron a short sleeve shirt: video

Do not forget to smooth out the "arrows" on the sleeves. This method is suitable for ironing both on the board and on the table.

Polo

The polo shirt is designed for leisure and sports. It has a short closure, a stand-up collar and short sleeves. It is made from knitted fabric, so over time it stretches and loses its shape. Consider how to properly iron it.

Polo shirt - clothing for sports and leisure

Ironing on the table is performed according to a different algorithm.

Advice! Now polo shirts are produced from non-wrinkling fabrics. Dry these items on a hanger, with the collar turned up, and they don't need to be ironed.

T-shirts are ironed in the same way, the absence of a collar simplifies the task.

Stretch

Stretch is not a fabric, but its property. This prefix means that the fabric has great extensibility and the ability to return to its original shape. This is achieved by adding a special thread that gives elasticity.

A large percentage of elastic fiber reduces wrinkling of the fabric, products from it do not require ironing.

When ironing stretch products, it is important to know the composition of the fiber. If it is unknown, set the mode to synthetic.

White

Ironing this item is no different from shirts of other colors, with the exception of one thing: the slightest dirt is visible on the white fabric. For a good result, the soleplate of the iron must be perfectly clean. Run the iron over the clean cloth a few times to make sure nothing is stuck to it, otherwise the white cloth will stain.

Use distilled or purified water for humidification. Make sure the ironing board cover is clean, if ironing on a table, put a white sheet on it.

Set the temperature correctly so as not to burn the fabric.

Woolen and half-woolen

Such things are ironed through a damp cloth or steamed in an upright position. Products with a relief texture are processed from the wrong side.

How to iron shirts

Ten years ago this question did not arise - there was no alternative to the iron. Now there are household appliances that can cope with ironing no worse than an iron, and sometimes even better.

Ironing devices

• iron;
• steam generator;
• steamer;
• ironing robot steam mannequin.

The most important part of an iron is the soleplate. The quality, material of manufacture and coating of the sole determines how easily it will glide over the fabric. This means how high quality the ironing result will be.

The better the sole of the iron glides, the better the ironing

Modern irons are equipped with a thermostat that allows you to iron things at the optimum temperature, a steam function and a sprinkler.

This is still the same iron, only more powerful than usual and equipped with a constant steam function. The power of the steam jet of this device is much higher than a conventional iron, due to which it easily smoothes any fabrics.

The power of the steam jet from the steam generator is much higher than that of the iron

If the use of steam is acceptable for the fabric, then this device is a godsend for the hostess.

Important! The steam generator produces only dry steam.

This is a device for smoothing fabrics with a stream of hot steam. The steamer is not an iron, and does not completely replace it. It is good for them to refresh things, smooth out wrinkling after storage, and get rid of the smell of tobacco.

The steamer can be used to iron clothes in a vertical position by hanging them on a coat hanger.

The advantages of the steamer include the possibility of ironing things in a vertical position.

Paromanequin

It is an inflatable mannequin for drying and ironing men's shirts and jackets. The thing is convenient, but the price is considerable, and it is difficult to buy it. Therefore, it is mentioned here for the general picture.

The ironing robot steam mannequin will dry and smooth any shirt without any problems.

It happens that the device has broken down, the power supply has suddenly turned off, or you are far from the benefits of civilization, and you need to maintain your reputation.

How to iron a shirt without an iron

There are some tricks with which you can give the shirt a presentable look.

Method 1

Light wrinkling can be removed by dampening your hands with water and running them over the fabric. Do this with a sharp downward movement. Then shake vigorously and let it dry. It is important that hands and water are clean, otherwise traces will remain.

This method works well on linen products.

Method 2

Hang shirts made of silk, chiffon, synthetic fibers on hangers in the bathroom and turn on the hot water, directing the jet from the bottom up. Be careful not to splash on the fabric.

After a while, the wrinkle will be smoothed out under the action of steam.

Method 3

Moisten your shirt with a spray bottle and… put it on. The tension and your heat will flatten the fabric.

Method 4

Prepare a composition of water, vinegar and fabric softener, taken in equal proportions. Pour the liquid into the spray bottle and spray the crumpled product - the wrinkles will smooth out.

This method is suitable even for white things, the composition will not leave stains. It won't work for synthetics.

How to iron fabric without an iron - video

1. Men's shirts are always ironed on the front side.
2. Dark shirts should be ironed from the inside out so that there are no streaks from the iron on the front.
3. It happens that despite all efforts, the shirt cannot be smoothed out. Steam in this case will not help, the fabric must be moistened and ironed with strong pressure of the iron. The heavier the iron, the better the result.
4. In cases where the fabric is difficult to smooth, moistening with water with the addition of conditioner or starch spray will help.
5. If the shirt has darts, iron them from the wrong side first. Vertical darts are smoothed out towards each other.
6. An embroidery or print on a shirt or T-shirt is ironed from the inside out. Place a sheet of paper under the drawing so that it does not print on the ironing board.
7. To make shirts easier to iron, hang them to dry and iron them slightly damp. Do not twist shirts or tumble dry them.
8. Store jerseys rolled up so they don't wrinkle.
9. Do not leave ironed shirts on the table or ironing board as they may wrinkle. Hang on a coat hanger and let cool, then store in your wardrobe.

Master class with comments on ironing a men's shirt - video

There is no limit to perfection, but we must strive for it. Having mastered the art of proper shirt ironing, you will come one step closer to the ideal. And, perhaps, you will fall in love with this difficult, but such a necessary job.

Every woman who wants her man to always be well-groomed and tidy should know how to properly iron men's shirts, trousers, suits. And not only to know, but also to be able to do it masterfully - without a hitch, or rather without a single wrinkle. Even knowing the algorithm of work, ironing men's shirts is not easy without the skill, but this is fixable. The main thing is that there is someone for whom these shirts would need to be ironed 🙂 Therefore, do not rush to complain about your difficult female lot when you see mountains of linen waiting to be ironed. You happy woman! And when love lives in the heart, even such an unpleasant occupation turns into pleasure. If your chosen one is not completely hopeless, using female charms and being smart, over time it will be possible to teach him this “art”. For the sake of truth, it is worth noting that among the representatives of the strong half of humanity, whose brain is not burdened with gender stereotypes regarding the division of labor, there are instances to which you can safely sign up for a master class on ironing men's shirts, but this is rather an exception to the rule.

Video lesson: shirts without a single fold

Master class: how to iron men's shirts

The washed shirt should be dried flat on the hanger and ironed while still damp. Wet shirts iron much easier and require less effort. If the moment is missed and the fabric is dry, we moisten it from a home spray bottle an hour and a half before ironing, fold it, wrap it in a towel, a piece of linen fabric or place it in a clean plastic bag so that the hydration is even.

Do not spray rayon shirts with water, otherwise stains will remain on the fabric after ironing.

In order for the ironing process to give you a minimum of hassle and take place in the most comfortable mode, be sure to get an ironing board and a high-quality iron with a stainless steel surface and a thermostat to select the optimal temperature for different materials.

To avoid unpleasant surprises in the form of stains, do not forget to regularly change the water filters and clean the soleplate of the iron. To steam fabrics in an iron, it is better to pour not tap water, but distilled water, which is sold in pharmacies. When using distilled water, salt deposits do not form in the iron tank and the chance of staining is minimized.

Most shirts should be ironed right side out. From the inside, dark-colored or embroidered shirts are ironed to make the ornament more convex. When ironing from the front side, shiny stripes may remain on dark fabrics, but if it becomes necessary to iron the shirt from the front side, then we use steam, lightly touching the product with an iron. In addition, shirts made of shiny fabrics should also be ironed from the inside so that they do not fade.

Choosing the optimal mode for ironing shirts

The ironing mode should be selected according to the type of fabric so as not to burn through and ruin the shirt.

• Pure cotton shirts require a temperature of 150 degrees, wet steam and strong iron pressure.
• Shirts made of cotton with the addition of polyester should be ironed at a temperature of 110 degrees. You can use a small amount of steam.
• Linen shirts are ironed at a temperature of 210-230 degrees, with large quantity steam and strong pressure.
• A mixture of cotton and linen requires a temperature of 180-200 degrees, abundant steam and intense pressure.
• Viscose shirts are easy to iron at 120 degrees. In order not to leave water stains on the fabric, it is not recommended to wet the viscose, but the use of steam is acceptable.
• Shirts made of fabric with the effect of compression are ironed without steam at a temperature of 110 degrees.

Technique and procedure for ironing men's shirts

A men's shirt should be ironed in a strictly defined sequence: first the collar, cuffs and sleeves, and then the placket, front and back. The basic rule is to first iron the small details, and then proceed to the large ones.

When ironing large parts, in order to avoid distortion and stretching of the fabric, the iron should be moved in the direction of the shared thread. Also, do not hold the iron in one place for too long and press it too hard against the surface of the fabric.

• Collar

We iron the collar from the wrong side from the corners to the middle. Then iron the collar on the front side in the same way. In no case do we iron the fold and do not bend the collar along the rack. Continue ironing until the collar is completely dry. On a perfectly ironed shirt, not the slightest wrinkle should remain, which is especially not easy to achieve with soft button-down collars.

• cuffs

It is from the cuffs that you should start ironing the long sleeves. As in the case of the collar, first the cuff is ironed from the inside, and then from the front side. The double cuff is ironed a little differently: first, unfold the cuff and iron it on both sides without folds, then fold it and, having given the desired width, iron along the fold so that the buttonholes lie flat one on top of the other.

• Sleeves

Fold the sleeve in half so that the seam is in the middle. After smoothing the seam, turn the sleeve over and iron on the other side. After that, we fold the sleeve along the seam and iron it from the seam to the edge so that the bends are not imprinted on the fabric. When using an ironing board for sleeves, simply pull the sleeve over it and iron in a circle. Regardless of the length of the sleeve, the arrows on the sleeves are not ironed! This is considered bad manners and is allowed only if the time for ironing is completely “running down” and you know for sure that the man will not take off his jacket.

• Front of the shirt

We start from the right shelf (in men's shirts it is always with buttons). On the narrow part of the board, lay out the shirt with the front part of the front or wrong side (depending on the fabric) and iron the yoke and top. Then iron the rest of the shelf, Special attention paying attention to the spaces between the buttons. The left shelf is ironed in the same way, but much faster, because, unlike the right one, there are no buttons on it.

• Back

Place the back of the shirt on the ironing board, wrong side or front side down, depending on the type of material. We iron the back, moving from the right side seam to the left. At the same time, we gradually turn the shirt and iron it in the following order: first, the side seam, then move up along the seam of the sleeve, then unfold and work on the yoke, go to the middle, turn again - the left side of the yoke, move to the seam of the left sleeve, and then down to the side seam.

How to fold a shirt so it doesn't wrinkle

Ironed shirts are best kept on hangers in the closet. After the ironed shirts have cooled, they can be safely hung on top of each other in any convenient sequence. Also, an ironed shirt can be folded, but this trick should be performed so that the shirt does not wrinkle. This is done as follows:

• fasten all buttons;
• turn the shirt upside down;
• fold sleeves;
• then fold the shirt on the sides;
• straighten and carefully fold the shirt in half.

To prevent the collar from wrinkling, you can insert a strip of cardboard under it. In the closet, folded shirts are stacked one on top of the other, collars in opposite directions. Similarly, shirts should be folded and stacked in a suitcase.