Making boxes and boxes with your own hands. Secrets of a beautiful DIY box. From salt dough

And the approaching holiday will be awaited with impatience and anticipation of the moment of presenting the gift.

Before making the box, we form a blank from cardboard. To do this, we take a rectangular sheet of cardboard, the width of which is almost half the length, and we draw it according to the diagram:

the first line is at a distance of one part (for example, 2-3 cm) from the edge;

the second line is in three parts from the first;

the third line is one part from the second;

the fourth line is at a distance of three parts from the third or at a distance of one part from the opposite edge.

On a piece of cardboard it will look something like this:

Now our workpiece needs to be given a relief shape by cutting out small triangles where folds and gluing will subsequently be made. Cut off the pieces of cardboard highlighted in red. Cut out a semicircle on the side of the box (in the diagram on the left).

We work out all the fold lines, which is why our workpiece acquires volume.

We begin to fold the box and fix the cardboard joints with glue. First we assemble the bottom.

And then we proceed to the lid.

We give the box a more interesting shape and appearance by gluing squares of cardboard with a raised edge onto them. The edge should hang over all sides of the box.

We apply a design to the side surface of the lid with white paint. You can paste it here satin ribbon or braid or decorative figures made of paper or foil.

Ready! All that remains is to decorate our product using any familiar techniques. Quilling looks good on this craft.

It gives it additional volume and special elegance.

What is a box and what is it for? Many will say that this is a piece of furniture in which we can hide all sorts of small things. Little girls are always given jewelry. Sometimes there are so many of them that there is nowhere to hide them. The solution to this problem can be a DIY paper box. You can do it yourself, or you can do it together with your child. This box will definitely please your little princess.

This homemade box is very interesting solution for a decorative item. It's up to you to decide what it will look like and a flight of fancy.

First way

To make such a box you will not need a large number of time, desire and patience.

To create this type of box we need thick paper, colored paper, Super glue, decorative ornaments. The box has a size of 12*25*12.5 cm.

It’s worth looking at the photo to see how to properly make a paper box.

First you need to glue the left side of the box.

Then we glue the right side. Do this carefully.

And in the next step we glue all the parts together.

The second step will be making a drawer. Its dimensions will be slightly smaller than the dimensions of the box. After you make the box, you should cover it with colored paper.

Scheme of unfolded cardboard:

We assemble the drawer by gluing its sides.

We cover the outside of the box with beautiful paper.

Take a piece of cardboard measuring 10.6*14.4 cm. We then cover this piece with colored paper. Then we insert this piece into the box. We create and paste over the second partition.

This is such a cute box made of paper.

Second option

The next idea is shown in photographs. You will also be provided with a manufacturing diagram and a pattern for a cute box in the shape of a house.

You need to cut out all the parts and bend them along the fold lines.

At the end, you can cover the box with colored paper.

Origami technique

Paper boxes made using the origami technique can turn out to be very original. There are a very large number of diagrams on the Internet that will help you create a box using the origami technique. In this article we will present you with a couple of schemes that are perfect for beginners. To create such boxes you will need desire and patience, and the materials you will need are paper and glue. The most important thing in the origami technique is to follow the instructions.

For those people who have never tried to do anything with origami techniques, these diagrams may seem a little heavy. Then you should make very simple elements first, and then try to make one of the boxes listed above.

Video on the topic of the article

We invite you to watch a selection of videos on how to create paper boxes with your own hands. Each video shows exactly how to make such products correctly.

Do you have a lot of jewelry and would like to store it on your dressing table in a beautiful box? Or are you looking for something else to diversify your home interior? Then you should stop by our page, and we will tell you in detail how to make a jewelry box with your own hands. Let's consider the most affordable and popular options.

Content:

Thick cardboard box

In order to create a feminine and elegant casket, you will need the following materials:

• milk cartons (2 pcs.);
• scissors;
• kraft paper and thick cardboard;
• glue, preferably PVA;
• ribbon;
• magnets (2 pcs.)
• wooden beads (for legs), beads;
• wrapping

Master Class. Step-by-step instruction

Step 1. Cut cubes of the same size from milk cartons without a bottom.

Step 2. Take one part of the shoe box and insert the resulting cubes, glue them together. These will be the cells of the box.

Step 3. Cover the resulting box with wrapping paper and the bottom and inner walls with craft paper.

Step 4. Let’s make a spectacular “wrapper” for our box:

Instead of beads, you can use beads, glass beads and even rose petals, dried or artificial. Decorate the box according to your taste and style, showing imagination and desire.

Examples of beautiful jewelry boxes

Creating a beautiful box yourself is actually quite simple, you just need to pay attention to the objects around you at home and use your ingenuity.

Examples could be following products:

From the packaging for cotton swabs

To create such a cute little thing, take an empty round package from cotton swabs. Cut pieces of colored fabric to the size of the bottom, walls and lid of the future box and carefully glue everything with colorless glue. You can decorate the box with beads, feathers, and various ribbons.

If you have a child in the house, ask him to paint the box himself. Such a cute casket will look great in your bedroom and nursery.

It’s good when a needleworker is at ease with knitting needles and knitting threads. With their help you can knit an outfit for a box in a very original way.

From a candy box

If you love candy and accidentally left a plastic box of it, rejoice: a cute box for feminine items is almost on your table.

Take a transparent package, sand it with sandpaper, and then cover it with acrylic primer (you can make uneven layers and squiggles). The next step will be painting.

Let the box dry and start decorating.

Design option:

• take a napkin with marine drawings, cut them out and glue them. Use decoupage glue.
• cover the resulting arts and crafts item with a clear layer of acrylic varnish.

From a shoe box

To do this, prepare:

• boxes for any shoes (2 pieces);
• velvet of any color;
• interlining;
• a small piece of crepe satin;
• golden faux leather braid;
• dish sponges or foam rubber;
• pen or pencil;
• matches (needed to burn the fabric);
• newspapers (useful for patterns);
• stapler (staples must be 20 mm);
• iron;
• ruler, tape (not wide);
• scissors, sheets of cardboard;
• iron.

To decorate such a box, it is advisable to opt for designer cardboard, which you can either purchase ready-made or create with your own hands.

From empty matchboxes

Making a casket like the one in the photo is quite easy. You should take only a few matchboxes and glue them in pairs to form some small chests of drawers. To ensure the base does its job, choose thick cardboard and make squares.

Colored paper with beads, beads and ribbons, stickers, and button applique will make the box more elegant. You can tie it up in an original way with multi-colored woolen threads.

From unnecessary books

The most unusual and aesthetically pleasing boxes are made from books that have served their purpose.

To do this, remove all the sheets, leaving only the frame (step back 2 cm from the edge). All pages should form thick walls; to do this, glue them along the entire perimeter. The base is ready. Any little things will be useful in decoration: beads, beads, parts of old hairpins or belts, artificial flowers, lace, trimmings beautiful fabric etc.

It’s very easy to make a cardboard jewelry box with your own hands, and its production does not require financial costs. Many people have wrapping paper, pieces of lace, beads and other similar materials lying around at home that are a pity to throw away. And you don’t need to throw them away - you can give them a second life by cheaply creating exclusive item for storing useful little things.

Cardboard box with compartments for various small items

There are many options for homemade boxes, so we will focus on popular models and consider decoupage ideas.

Using the master class, you can make a specific model of a box step by step. But not always everything is available at home necessary materials, so let’s look at how to make a base for a box and basic ideas for decoration. And then the master can create on his own, based on his imagination.

Despite the variety of forms, all models can be divided into three groups:

• Box. Looks like a box with a lid. Inside there is one or more compartments where you can store jewelry or other useful little things.
• Chest of drawers A small box with drawers, reminiscent of a chest of drawers.
• Figured thing. Can be made in the shape of a flower, heart or any other shape.

Box

Simple rectangular model is easy to use

Making rectangular or cardboard boxes square shape- the simplest option. The big advantage is that you can make such a thing from existing cardboard box from sweets, performing only external finishing. But you can make a box yourself. To do this you will need:

• a sheet of thick cardboard;
• scotch;
• PVA glue;
• pencil;
• ruler;
• scissors.

Before you start work, you need to decide on the dimensions and make a drawing:

• the height of the side of the future product is measured from the horizontal edge of the cardboard sheet and marked with a straight line;
• the same marking is done from the vertical edge;
• from the formed right angle, the length is laid in one direction, and the width of the future box in the other (you should get a square or rectangle - this is the bottom of the future product);
• The height of the side is determined from the other two formed sides of the bottom.

The finished drawing will look something like this (the size of the side and bottom can be changed as desired).

Next, the walls of the box are glued together with PVA glue. If the cardboard is too thick, it is recommended to fasten the structure with tape to avoid unsightly thickening. If necessary, the inside of the box is divided into compartments for storing small items. It is better to attach cardboard jumpers to the walls and bottom using tape.

The lid is cut equal to the width of the bottom and secured to one side with an elastic band.

If desired, the lid can be made removable and with sides, according to the scheme proposed above, but at the same time, 0.5 cm must be added to each edge of the bottom on each side to ensure free opening and closing.

Chest of drawers

The following master class will show you how to make a jewelry box with drawers. The manufacturing technique is similar to that described above:

• a rectangular box is made without a lid (its dimensions correspond to the future “chest of drawers”);
• jumpers for drawers are inserted;
• a box is made 0.5-1 cm smaller in size than the compartment made (for ease of pulling out).

Options with drawers look very original

The number of boxes is not limited and depends only on the desire of the master, but it is not recommended to make more than three (the design will look too massive). Most popular option: simple box for small items it is located at the top, and at the bottom there are 1-2 drawers for various accessories.

Curly design

At first glance, a DIY shaped box seems complicated. But in fact, there are no big difficulties in manufacturing, you just have to carefully read the instructions:

The finished product must be decorated. Try making boxes from cardboard and fabric or using pieces of wallpaper, craft paper, self-adhesive film and other materials for decoration.

Some current tips:

• If you plan to make a hinged lid on “soft hinges,” then the elastic tape must be secured before decorative pasting.
• When finishing items with light fabrics or transparent paper for preservation color range It is recommended to paint the outside of the base white acrylic paint.
• If the drawers of the chest of drawers are being finished, then the front part needs to be made a little wider and equipped with a “handle” for ease of retraction (the role of the handle can be played by a large bead glued on or a loop made of a beautiful ribbon).

After pasting the product inside and out, you can do decoupage at your own request. Any materials are used for this: beads, lace or ribbons. Some craftsmen create unique masterpieces from pasta or toothpicks coated with acrylic paint. You can try:

• weave flowers from ribbons;
• lay out a mosaic of cereals;
• combine different materials.

The suggested recommendations will help you make an original box of the required size and shape from cardboard and available materials. Original and beautiful product will perfectly decorate the interior and help you conveniently store small items in one place.

Every woman at home has a box, a box, a jar in which jewelry, jewelry, cosmetics, and so on are stored. The most common items for storing small items are boxes. They are made of wood, cardboard, glass, metal. Nowadays you can buy a lot in the store, but there are many people who love to create and decorate objects with their own hands. If you decide to decorate your box, make it original and unique, our master class will help you. The decorative technique is the simplest, most accessible and understandable. You don’t need to have any special skill to decorate a box with your own hands and add charm to it.

If after repair there is a piece of vinyl wallpaper left, you can use it to decorate a wooden or cardboard box. Our master class will tell you how to decorate a simple thing with your own hands using textured wallpaper and give the surface a metallic effect. Let's say you have this roll of wallpaper left. Wallpaper can be of any color; our task is to paint the paper to match the color of the metal.

To work you will need:

1. A piece of wallpaper or textured paper.
2. PVA construction adhesive.
3. Paper towels.
4. Acrylic paints: black, copper, red, silver, green, dark gold.
5. Varnish for coating.

To decorate a box with your own hands, you need to take a roll of wallpaper or textured paper, attach it to the box and cut off a piece with an allowance for the sides.

You can decorate only the lid of the box without touching the side walls. You can decorate both the lid and sides. Who likes it more? To cover the lid, apply a brush or sponge to the back of the paper. Take PVA glue and dilute it a little with water. You need to spread it so thickly that the paper is well saturated with glue and swells. Leave the paper aside for a while until it swells completely. Then we glue it onto the surface of the box. Press firmly with a sponge or with your hands to the surface. Make sure there are no wrinkles or bubbles.

Next, let the glue dry and only then paint the box and give it the look of metal, aged by time. In order to apply paint to the surface, disposable paper towels, soaked in water. We need the paint to lie unevenly and in irregular islands. First, cover the surface of the box with black acrylic paint. We have it in a can, but it can also be in a jar.

Let it dry and then cover it with red acrylic paint.

Add silver paint after the previous one has dried.

We tone down the red silver with bronze color.

At the end of the master class, we apply a varnish coating to the resulting product. The varnish can be any: matte or glossy, aerosol or simple. You can also decorate a vase, you will get a set.

In this master class, we combined several techniques for decorating a box with our own hands. Let's try to mix styles, textures and techniques. The main theme of this master class is fabric imitation using painting. Since not everyone knows how to draw well, we decided to use a stencil here.

A stencil design is attached, you can choose any one you like.

The master class is simple, even a beginner can handle it.

To work you will need:

1. Casket or box.
2. Acrylic primer.
3. Acrylic paints.
4. Tassels.
5. Stencil.
6. Masking tape.
7. Sandpaper.
8. Everything that can be useful for decoration: cord, ribbons, lace, braid, and so on.

If the box or blank is made of wood, you may need to sand it with sandpaper and varnish it. This way we will protect the workpiece from swelling.

We wait for it to dry and cover it with acrylic primer.

Dry and sand. Cover the bottom and top corners with masking tape.

We paint all sides of the box with any light acrylic paint. Thus, we make the bottom layer for imitation fabric.

We paint with a brush in a horizontal direction, applying the paint evenly and evenly. Next, let the workpiece dry, sand it with sandpaper and varnish it. We mix our light paint with the same beige paint a shade darker.

The paint should not be too thick, so be sure to wet the brush in water and squeeze it out. Apply it to the side with horizontal strokes.

Then take a sponge or brush and sweep it across the surface in a horizontal direction.

That is, we need to make an imitation of fabric. This will be one direction of our “fabric”. This is what should happen after processing with a sponge or brush:

We needed a layer of varnish to prevent the paint from being absorbed into the surface of the product. If it weren't for the varnish, we wouldn't have gotten such a textured surface. We do the same with all the side surfaces of the box: paint and wipe off the paint with a sponge or brush. It will be great if you apply varnish on top. We wait for the product to dry, put the same paint on a wet brush and paint the side parts, but this time vertically. We erase the paint with a sponge vertically. As a result, we should get “fabric”.

Dry and lightly sand the sides of the product. We choose a stencil for our pattern. Let's say this is a drawing with a rose.

We cover with tape the places that are not needed for decoration. We place the stencil on the side of the product.

Choosing colors for printing the pattern. In this master class it is yellow, burgundy, light green and dark green. We take paint onto a brush or sponge and apply it to the stencil. There should not be a lot of paint so that it does not flow under the template. Your brush should be semi-dry. Don’t rush, if the first time it didn’t turn out bright, you can go over it with a brush again. We remove the stencil and wait for the paint to dry. Turn the stencil over to the other side. Flowers should be arranged randomly. We paint the stencil.

This is what the side looks like. There should be no empty spaces; instead, draw leaves on the main background. Fill the empty space with small leaves.

Next, sand the sides after the surface has dried. To complete the job, you can coat the sides of the product with several layers of varnish. It's time to work on the lid. Place strips of masking tape on the sides of the lid. We paint the lid in the same order as the sides. First, we varnish a light color, similar to the “fabric”. Then the “fabric” itself: paint horizontally with a brush, then vertically.

Dry the lid and place the stencil on it in different directions. Apply yellow and light green paints. We fill all empty spaces with small sheets. Apply the stencil again, paint the roses burgundy and the leaves dark green. Sand horizontally and vertically with a brush after drying. We admire our work and apply varnish in 2-3 layers.

We decorate the bottom of the box and the sides at our discretion. In this master class, the sides of the lid are painted in yellow, the cord is glued with a glue gun. At the bottom there is a velvet ribbon glued with Moment glue. Wooden legs are glued. It will be beautiful if you attach a strip of lace or gold braid, cord, and so on.

The decor of the box is limitless for your imagination. All this beauty can be made with your own hands. Not all boxes have an elegant design and are suitable for interior decoration. But if desired, this can be easily fixed. Anyone who has a little free time, patience and inspiration can make something exclusive.

You can decorate with anything: buttons, paper flowers, lace, polymer clay, beads, glass, coins, shells, and so on. Perhaps you have jewelry lying around that you don’t wear, but you don’t dare throw it away: it’s also useful for decoration. The photo shows a variety of decor for storage items. We hope that these ideas and master classes will be useful to you in your creativity.