How to make paper tulips. How to make paper tulips with your own hands. Corrugated paper tulips with candies

Don't know how to make a paper tulip in a simple way? Check out the step-by-step instructions and you can make this one quickly and easily. beautiful flower. And then show the method to the children and see how skillfully they cope with the task. So let's get started.

You will need:

Colored paper in green or any other color suitable for tulips;
Scissors, ruler, glue stick.

You can ask children if they know what colors tulips come in? And then let everyone choose the color of paper that interests them the most.

How to make a tulip out of paper with your own hands?

Making a tulip flower

For the flower you will need colored paper square shape. All sides are equal to 12 cm. This tulip size is the most optimal. But the choice is yours; you may prefer a small flower or, on the contrary, a large and impressive one.

Fold the square in half, pressing the side well. Then straighten and fold on the other side, and then from one corner to the other and the second corner. You should have visible criss-cross and diagonal folds.

Take scissors and cut along the four straight sides along the fold. But you don’t need to cut all the way, but a little more than half.

Do this with all the cut sections and you will have a tulip flower.

Making a stem

For the stem you need a rectangle of green paper. We compare its length with the flower. I took a standard sheet of A4 paper and cut it crosswise into 3 even parts. Since I planned to make three flowers, I ended up with 3 rectangles, one (wide) side is equal to the narrow part of the paper, and the second is about 10 cm.

This piece of paper needs to be rolled into a narrow tube, starting from the wide part. Glue the end side with glue so that the stem tube does not open. Cut one end of the stem into several strips and bend them outward. Try it on the tulip to see if the slits protrude too much from the bottom. Cut off the excess and trim.

Apply glue and glue to the bottom of the tulip.

That's it, now you know how to make a paper tulip with your own hands. This is one of the easiest ways for children to make a beautiful surprise for their mother or grandmother.

There is a legend that tulips bring happiness to people, or at least good mood. Unfortunately, we cannot find these flowers at any time of the year, but we can always make them with our own hands! All we need for this is inspiration, A4 paper and scissors!

How to make paper tulips with your own hands step by step?

For variety and beauty, let's take multi-colored paper, for example, pink for the bud and green for the stem.

Step 1. In order to make a bud, we need a square sheet of paper. (see figure 1)

Step 2. You need to bend the sheet diagonally so that the opposite corners align. (see figure 2)

Step 3. Then, we do the same, but with opposite corners. (see figure 3)

Step 4. Unbend the sheet, you should get 2 lines that intersect in the center of the sheet. Then fold it in half. (see figure 4)

Step 5. Now we bend inward those 2 corners that we did in the 2nd and 3rd steps. (see figure 5)

Step 6. Now we bend the side lower corners to the top, turn them over and do the same. (see Fig. 6,7 and 8)

Step 7 Now, we bring the side corners together on both sides so that they extend beyond the center line. (see figure 9)

Step 8 The second fold should go into the inside of the first corner. We do this on both sides. (see Fig. 10,11)

Step 9 There is a hole at the bottom of our bud, through which we will inflate our tulip. (See Fig. 12)

Step 10 Now we bend the corners from the top - these are our petals. (see Fig. 13)

Step 11 Now the stem. Take a sheet of paper and roll it into a tube, insert it into the hole at the bottom of the tulip. (see figure 14)

VIDEO. How to make a beautiful tulip from paper?

Hi all. Do you remember how to properly make a tulip from a colored leaf or corrugated paper step by step, if you forgot, I recommend that you read the step-by-step instructions, diagram and step by step photos They will help you do the right job using the origami technique.

They teach you how to make this flower at school during labor lessons, but not everyone remembers it correct sequence actions. A very simple tulip is made from white paper or regular colored paper, which is what I’ll start with today, and later I’ll tell you how to make tulips from corrugated paper with candies inside.

How to make a paper tulip with your own hands

Light paper flowers are made using the origami technique, because the main material is paper and most often A4. I recommend using colored paper, it will work beautiful bouquet for mom or grandma or to decorate an office or other room.

The following will be used in the work:

Sheets of colored paper.
Pencil.
Ruler.
Scissors.
Tree branches.
Vase or basket.
Decorative or ordinary stones.

Glue is also needed in this work; with its help we will attach a stick, which will be the stem of the flower.

I start the master class by cutting A4 sheet. Using a ruler, divide it into 4 parts and cut along the line with scissors. You can use the whole sheet then spring Flower will large sizes. Friends, study carefully step by step diagrams and photographs, it is advisable to choose double-sided paper or with shades.

Fold the square diagonally, then along the other diagonal, you get a pyramid. Now we fold the figure into a triangle, tucking the sides inward. It's actually easy to do.
Now fold the side corners in the same way as shown in the diagram. We do the same work on the other side.
Fold the origami so that the corners are inside the sides. Look carefully at the photographs, do this work from all sides. You will get a very simple, but unopened tulip, which can be called a bud.
In order for the flower to become voluminous, you need to blow into it. Blow into the small hole at the bottom, then your paper bud will open, bend the corners, attach the stem.
I advise you not to inflate all the buds, this way the composition of paper flowers will look more festive.

Look at the paper and festive bouquet I made, arrange the flowers in a vase or fill a basket with them.

How to make a tulip from corrugated paper

Tulips made from corrugated paper are easy and simple to make, choose the right colors, it is advisable to alternate them, then you will get a bright bouquet. For work you will need green color, it will be used for the petals.

Buy corrugated paper, follow the diagrams. Cut strips 17 cm long, 3 cm wide. Fold each cut piece in half, cut off the part, making it narrower. Twist each strip twice, see photos.
We fold the paper strip in the middle, stretch it with our fingers, as shown in the photo, and give it the shape of a flower. Repeat the detailed procedure with other petals, it's simple. Attach the petals to the stick, overlap one another, and finally secure them with narrow tape. You can't use plain white paper here.
For the stem, use a florist stick or a regular twig. Wrap it in green paper, you can use corrugated or decorative paper. Secure it at the bottom with tape or glue.
Your handmade paper tulip is ready, collect the bouquet and place it in a basket or vase.

Corrugated paper tulips with candies

A bouquet of tulips made of corrugated paper with sweets can be completed in just 30 minutes; as you can see, it won’t take much time. For work, stock up on colored corrugated paper, delicious candies, wire, glue and scissors.

I suggest you do it easy master class, it will start with cutting out petals. Cut a sample from cardboard, trace it on paper, cut it out, and stretch it a little to the sides. You will end up with a spoon-like shape. Look at the step-by-step photos and diagram.
We apply the petals to the candy so that the second one overlaps the first one. I recommend doing this work in two layers. Bend the second layer of petals slightly outward. Secure the paper with thread, wire or glue. Insert the wire into the bud, this will be the stem.
The origami tulip is almost ready. Wrap the leg green, glue some greenery, collect all the tulips with candies into a bouquet. If you are making this paper flower arrangement for a teacher, use pens or pencils as the stem.
Don’t be afraid to make crafts with your own hands, see how beautiful the end result is.

How to make a tulip out of paper - video

If it is difficult for you to understand the step-by-step actions, or the diagrams are not entirely clear, I suggest watching a video with which you will be able to realize the idea and make an origami tulip with your own hands.

Friends, how do you like my photos of paper tulips? If you like them, then grab a sheet of white or colored corrugated paper, repeat the steps and make your loved ones happy.

Come visit, Nina Kuzmenko was with you.

Good day to all!

When a holiday approaches, we try to buy gifts for all our friends and relatives. These gifts can vary in significance and cost. It goes without saying that the most expensive things are given for the most significant events. But there are also those when a small handicraft made with your own hands will come in handy, especially when they are made by children. One of the most common crafts is artificial flowers.

However, this craft will be suitable for any holiday, as a small souvenir. In the previous article we. This article will talk about best options making paper flowers, namely tulips. By the way, some options can be safely done with children in kindergarten or elementary school!

So let's get started.

In order to make such tulips, you need to prepare corrugated paper, several sweets and wooden skewers.

First of all, insert the skewer into the candy wrapper and wrap it with tape around the skewer.

Now take one piece of paper and twist it like a bow.

After this, we fold both halves together and stretch the paper, making convex petals.

We take this petal and apply it to the flower blank. Attach with thread.

In the same way we attach two or three more petals - depending on what kind of flower you want to make.

Now we cut leaves from green paper and attach one to each flower.

If the petals are made from paper of different colors, you will get a bouquet of multi-colored tulips.

That's all. Make bouquets and give them to mothers and grandmothers, friends and acquaintances.

Bouquet of tulips from foamiran step by step

Another material that is well suited for a tulip bouquet is foamiran. In addition, you will also need such items as green tape, wire, glue, iron, knitting needle, spoon, scissors.

We start by cutting out petals of the required size from foamiran.

You can first draw a template and then cut it out. In order not to attach each petal separately later, you can immediately make three of them together.

To make the petals look a little natural, we tint them with pastels.

Now use a spoon to shape the petals. We apply the petal to the heated iron, heat it, then place it on a spoon. As a result, it will turn out to be concave.

If you have triple petals, then each of them is heated and pressed into the desired shape.

We make a tulip leaf in the same way, and use knitting needles to draw veins on it.

Now we take the wire, wrap it with tape - we get a stem. We attach the petals to it. First, we glue three petals in the first row, then three more.

If you cut out three petals at once, then this is easier. You attach them to the wire, then lift them up, forming buds.

All that remains is to attach a leaf to each flower. As a result, we get such a wonderful bouquet.

How to make tulips from satin ribbons

A small master class on how to make a bouquet of tulips and satin ribbons. It will turn out very beautiful. These bouquets can decorate any festive table.

To make a flower you will need:

satin ribbon red or pink or yellow 2.5 cm.
glue,
scissors,
cotton buds
beads,
leg-split,
tweezers.

Making petals. We cut the tape into pieces 4 cm long. We round the edges on one side and burn them.

Lightly fold the other end and burn it with fire or glue it together. For one flower you need to make eight pieces of such petals.

Now let's move on to the stamens. You can take as a basis cotton swab and attach stamens to it. The stamens themselves can be made by attaching a bead to thin wire. You can burn the twine.

The rest are attached to the second row.

All that remains is to make the leaves. Take a green or yellow ribbon and cut it into 5 cm pieces. We cut each piece into the shape of a leaf and burn the edges.

Watch a step-by-step video master class on how to easily make tulips from ribbons:

The flowers turned out gorgeous!

We make tulips with our own hands from fabric

To make a tulip from fabric, you must have sewing skills, since in this case you will have to use a sewing machine.

First, let's prepare the pattern.

So, let's take the material, any material will do here, even something not quite ordinary for a flower. We make three blanks for the bud.

We sew them together to make a bud.

Let's start with the petals. We also cut out the pattern and sew the two parts together. So that the seams are not on the outside, turn the product inside out.

For the stems we use kebab sticks. Coat a strip of green fabric with PVA glue and wrap it around the stick. In principle, you can use a thin pencil.

Now we glue the flower to the stem.

All that remains is to take a leaf and wrap the bottom part around the stem and stitch it.

That's all. The result was a flower.

Step-by-step origami diagrams for making tulips

Creating crafts from paper or origami is interesting and exciting creativity.

There is just so much that is made from this common material. Making flowers is not exactly a complicated process.

The main thing is to take your time and do everything calmly. This is a Japanese technique for making crafts, and it does not tolerate fuss. We have prepared for you step by step instructions with diagrams (templates) for downloading, as well as a video master class on how to make tulips out of paper.

For the craft, take a square sheet of paper and fold it in half twice. After which the triangle is bent on one side and unfolded, then the same on the other side. The result should be a triangle.

After this, all that remains is to collect the stem and put a bud on it. The diagram is shown below.

To make it more clear, this video shows the entire process of assembling a tulip using an origami pattern.

Happy crafting to you!

Creativity brings incredible pleasure when you do it with a child, be it at home or in kindergarten. Even beginners will cope with the task if they follow all the recommendations from the proposed master classes on creating tulips.

To make a tulip out of paper, you need a little time, a creative mood and the following available materials (their quantity depends on the size of the composition):

favorite comfortable scissors;
pliers;
coil of wire;
wooden skewers;
emerald-colored tape;
multi-colored packaging paper;
thin tape (double-sided);
sweets (Raffaello is best);
green or light green paper;
satin ribbon of any shade;
crepe (aka corrugated) paper different colors for buds.

Main stages:

The wire is cut with pliers to the desired size - it will act as stems for future tulips.
Corrugated paper is cut into 8 long strips of equal width. It is recommended to first work with one color, making a bud out of it, and then cut the rest of the paper.
Each strip alternately scrolls down the center. Bends so that front sides the papers were facing in the same direction. 5 more pieces are made in the same way.
At the place where the bud will be attached, the wire is wrapped in a layer of double-sided tape. One candy is “pricked” on top so that the adhesive tape peeks out from under it.
The first petal is carefully attached to the tape. The other 2 are located near the candy itself and are secured with tape.
The remaining blanks are attached to the stem in the same way. The formed bud is once again fixed with tape.
The ends of the paper protruding from below are carefully cut off at an angle with sharp scissors. You need to act very carefully so as not to damage the base and the flower does not fall apart.
For reliability and beauty, the stem is wrapped with tape, which helps enhance the realism.
A strip of green corrugated paper is cut into 2 equal parts. Each of them is folded 4 times, after which the leaves are cut out. They should be quite thin and pointed at the end.
Using a wooden stick, each leaf is pulled out in a spiral.
A short leaf is placed closer to the base of the tulip, and a longer leaf is placed below. All this is secured with tape. This is the creation paper flower can be considered completed.
Tulips of other shades are made in the same way. There can be from 5 to 13.
In order to assemble a voluminous bouquet, 2 buds are pulled together with tape, and then one tulip is added, the colors of which alternate.
All that remains is to cut 20 leaves and secure them along the edge of the bouquet with tape. Then wrap it in beautiful paper and bandage satin ribbon. Another option is to place the flowers in a small basket.

If desired, tulips made from corrugated paper can be decorated with dew drops. For this purpose, transparent beads, a glue gun and tweezers are used for greater convenience.

Children's card “Vase with flowers”

Before you begin the step-by-step creation of the craft, you need to prepare the following materials:

sheet of cardboard;
a simple pencil;
glue stick;
children's scissors;
printed templates of vase, petals and leaves;
good quality colored paper...

Main stages:

Stencils of petals, leaves and vases are alternately applied to paper of different colors and outlined with a pencil.
A vase is carefully cut out with scissors, which can be made from a piece thick fabric. Then blanks are prepared for future tulips.
The details of flowers and leaves are cut to the middle with scissors. To give volume to the bouquet, the blanks are glued together overlapping.
A cardboard sheet is folded in half to make a postcard. The vase is glued in the middle using a special pencil. The tulips are placed over a small semicircle, after which the application is set aside until completely dry.

Making your own tulips from paper is very easy. This is a great gift for mom, grandma, teacher... kindergarten for the holiday.

Interesting: tulips made from foamiran

Tulips at home can be made not only from plain paper. A material such as foamiran is excellent for this. It holds its shape well and helps create small masterpieces.

Necessary materials:

iron;
glue;
spoke;
pastel:
foamiran;
tablespoon;
thick wire;
green tape;
small scissors.

Main stages:

Petals of the required size are cut from the base material. Their number depends on how many flowers you want to get as a result.
Paper tulips will look more natural if they are treated with pastels. Different colors are used for this, as shown in the photo below.
Each petal is applied to a hot iron for a few seconds. After that, he very quickly presses himself against the spoon. It is pressed lightly with your fingers to form a concave shape. To add realism, thin veins are drawn out with a knitting needle.
To make a reliable stem, you need to wrap the wire with tape. First, a row of three petals is attached to it, and then the same number are added to create a lush bud.
The rounded part of the leaf is pierced with the lower end of the wire and attached approximately in the middle of the stem. All these steps are repeated when creating the next flowers to create a beautiful bouquet.