Pattern of a headband for swimming. How to sew a headband - those cute ears! Wide knitted headband: master class

DIY headband - beautiful decoration, which is suitable not only for a little girl, but also for adult woman. This product is practical and convenient. It is quite simple to make it, guided by step by step instructions. The main thing is to carefully think through the idea, prepare all the necessary materials and tools and get to work.

For them you need to prepare an elastic band or tape, soft cloth(foamirin or felt), needle, thread, glue and tape measure.

The work begins with making a blank for the flower. To do this, cut 4 circles from a piece of cloth. Fold the first one in half and glue the center. Place a second one on top, folded in the same way, and glue the circle again. Repeat the same steps with the remaining two blanks.

While the glue dries, measure the circumference of your head and cut the resulting length from an elastic band or ribbon. Sew the ends of the base and sew the already made flower to it.

Another version of the bandage can be made from the same materials:

Cut 10 circles from the fabric and sew them in the center.
Tighten the main thread to form a flower.
Cut a length from the ribbon or elastic band corresponding to the circumference of your head.
Sew the ends together and sew a flower to the product.

This headband can be decorated with several flowers or a bow, which will also look beautiful.

Product for baby

For such a bandage you will need alone nylon tights , needle and thread, scissors, centimeter, finished flower, decorations. Before sewing a headband for a girl, you should measure the circumference of the head.

Knowing this information, You can start making a baby product:

Cut off the base of the tights. It should be 5-7 cm less than the head circumference.
Sew the ends of the base and sew a nylon elastic band to it so that it looks like a bow.
Decorate the headband with a flower and other decorative elements.

Another simple option on how to make a headband for a girl. For it you will need an elastic band, a wide satin ribbon or fabric, thread, needle, scissors, and decor.

Manufacturing:

Measure your head circumference.
Cut a piece of elastic 2-3 cm larger than the circumference of your head.
From material or tape, sew a rectangle in 2 layers, the length exceeding the elastic by 8-15 cm. Leave one end of it open.
Insert an elastic band inside the rectangle.
Gather the fabric/ribbon and sew up the edges of the elastic and fabric.
Decorate the product with beads and an artificial flower.

Motif

Lace will be used as the base here. In addition to this, you need to take a soft cloth, a ribbon, a needle and thread, a flower, and a glue gun.

We make the decoration:

These hairbands can be worn for special occasions, themed parties, photo shoots, for every day.

Homemade Solokha

For such a product you need an elastic band, the width of which is 3-4 cm, and cotton fabric in two colors. The Solokh headband pattern is designed for a head circumference of 50-52 cm. The width of the headband is 4-6 cm.

You need to cut 2 pieces of 20 cm from fabric, 11-13 cm from elastic. If the latter material is tight, then it is better to cut a little more by 2-3 cm. The resulting parts need to be sewn with the large side. There is no need to sew the beginning and end of each segment.

Not reaching the seam 1-2 cm, cut the edges at the folds. Turn out the resulting blanks and iron them. Then you need to take the elastic band and the part that will be in the middle of the bandage. Insert the elastic band inside the workpiece and sew on both edges. You will get an elastic band in a fold.

Now you need to sew all the parts together. To be safe, it is better to do several lines. This creates a bandage that can be tied.

You can make a straw on your head with your own hands in another way. For this you need fabric 11x80 cm, a piece of wire 170 cm long and 2 mm in diameter, and sewing supplies. Instructions:

Fabric decoration

For such a product you need to take a piece of fabric, sewing pins and thread, scissors, a measuring tape, and a wooden skewer.

First of all, you need to cut out 2 identical strips of 90x3 cm from the fabric. Iron them, place one on top of the other and sharpen the edges with scissors. Place the strips right sides together and pin together with sewing pins. Sew around the entire perimeter, leaving a small hole on one side.

Cut off the ends from the inside and turn the workpiece inside out. For this you will need a wooden skewer. Her must be attached to the tip of the product and push the material towards the previously left hole. Do the same with the other ending.

After the bandage is turned out, it must be ironed. Now the entire product should be stitched around the perimeter.

Pin-up style

A headband in this style allows you to emphasize the individuality of its owner. For the product you will need a piece of bright fabric 10x70 cm, wire 150 cm long, thread with a needle.

Manufacturing instructions:

Take the material and fold it in half wrong side.
Sew the edge.
Leave 5 cm unstitched on one side.
Insert a wire bent and twisted into the resulting hole.
Sew up the hole.

There are many other ideas and variations on how to make your own headband. You need to be patient and create, creating beautiful masterpieces.

Perfectly complement the summer look of a modern teenage girl.

Summer is simply created for bright colors and incredible experiments. And if you haven't tried it yet, this might be just what you need. And also this great way add a little fun and spice up your usual summer wardrobe. Start with simple things like headbands.

We suggest transforming an old T-shirt and making cool tie-dye headbands out of it. These DIY headbands will become stylish and popular summer accessories.

How to tie-dye a T-shirt

To dye fabric, it is better, of course, to use an old white T-shirt, which is sure to be found in every closet. But you can also use T-shirts in delicate solid colors.

To tie dye a T-shirt you will need:

paints;
stationery erasers;
gloves;
cling film;
plastic bag ziplock to put clothes in there;
syringes or plastic bottles from under the sauces.

To make a T-shirt headband, you will also need:

scissors;
thread and needle or sewing machine.

One of the most interesting parts of the tie-dye process is the variety of patterns that depend on how exactly you fold and elasticize the fabric. Having chosen the desired option, twist the T-shirt accordingly, carefully add paint to different areas of the fabric and wrap in cling film or place in a plastic bag so that the paint saturates the fabric well.

For rich colors, the fabric should be soaked in the dye for 6-8 hours. If you want to get delicate pastel shades, just leave the paint on the fabric for about 30 minutes.

Once the dye has reached your desired intensity, carefully unroll the T-shirt, remove the elastic bands, rinse the T-shirt to remove excess dye, and wash it in hot water with a minimal amount of powder.

Dry your dyed t-shirt and start making bandages!

Tips and hacks for successfully tie-dyeing fabric

Be sure to wear gloves if you don't want your fingers to stain as well. When working with paints, wear an apron or old clothes, which you don’t mind getting dirty, and be sure to cover the work surface with something.
It is better to use cotton fabrics for dyeing. Synthetics, of course, will dye, but most likely the color will disappear after several washes.
Tie (or pull with an elastic band) the fabric very tightly, because when wet, cotton expands in volume.
Make sure that the dye gets into all the folds of the fabric if you want a completely painted T-shirt.

3 options for making a stylish DIY headband from an old T-shirt

With a brightly colored tie-dye t-shirt on hand, you can start sewing headbands.

DIY braided headband

If you know how to braid hair, you can make a cool braided headband. Cut the fabric into 9 strips long enough to cover your head. Braid 3 separate fabric braids. Connect the ends of each braid together using a sewing machine to create three different braided headbands. As soon as each braid is ready, put them together and run a stitch in one place (at the seams) through all three braids, thus sewing them to each other.

Headband with knot

Take a rectangular piece of fabric from which you will need to cut 2 long wide strips. Fold the fabric in half and cut out two rectangular strips 33 cm long and 6 cm wide. Make the ends of the strips rounded.

Place the two strips right sides together and sew with a zigzag stitch, leaving a small 5cm opening to turn the bandage outwards. Turn the fabric inside out and sew up the hole. Iron the bandage. All that remains is to tie it on your head double knot. That's all!

DIY Twisted Headband

Cut two rectangular strips of fabric about 35cm long, fold each in half and fold them crosswise. Make sure the stripes actually intersect. Pull the ends to create a weave of stripes in the middle. Sew the ends of each strip together without unraveling the bandage. Then sew a button to one end of the bandage and make a hole on the other.

Photo source: www.encouragefashion.com

Your new DIY headband is ready!

Now you know how to put an old T-shirt to good use. Such bright fabric headbands, made with your own hands, will become an indispensable accessory near the pool or at the sea, as well as a bright accent in a summer wardrobe.

Already have a child? Or are you just waiting for a new addition to your family? Did your loved ones have a daughter? For this flower of life, you can make a stylish and charming headband as a successful start to your little one's journey in the fashion world! This article will teach you how to make a great headband for babies or children. younger age, which can be completely customized to suit your specific needs and style.

Steps

Taking measurements and preparation

Measure your head circumference. To make a headband, you need to know the approximate size. To do this, you can take measurements or use size tables according to the child’s age or weight. When taking your measurements in person, you will need to measure your head circumference approximately where the headband should be worn. Usually the measurement is taken directly above the ears.

Babies are very fragile creatures who don't like to sit still, so taking measurements can be a bit of a challenge. If you have a measuring tape, use it to take measurements. Do not use metal tape measures, you may scratch your child and the measurement will not be very accurate. If you don’t have a measuring tape at hand, take a soft string and measure your head circumference with it, and then determine the resulting length with any measuring device.
If the baby is not nearby or has not yet been born, you can rely on standard size charts. They can be found on the Internet. Try to find them on websites and forums dedicated to sewing and needlework. It may also be possible to measure the head circumference of another child of similar size and age.

Decide on the size of the product. You need to decide what the width of the product should be. It largely depends on the size of the child who will wear the bandage, since a bandage that is too wide will not fit well on the head and will slip off. A newborn is unlikely to wear a bandage wider than 1 cm. A child 6-12 months old will probably be able to wear a bandage up to 2.5 cm wide. preschool age A bandage up to 5 cm wide is suitable.
- You can check your estimated dimensions before making a decision. Try cutting a strip of the required width from waste fabric and visually see if this width is suitable; or you can try on ready-made store-bought headbands for your child to select the desired width.
Select materials. Necessary materials depend on what type of dressing you want to make. Since children have soft, delicate skin, it is best to use stretchable soft materials. Stretch knitwear, corduroy or lace are best for babies. The base of the bandage should be made of this material. There are more options for jewelry since it won't be in as close contact with your baby's skin.
Cut out the material. Having selected the fabric, you will need to cut it. Knitted material must be cut in double width so that it can be sewn with a tube. If you use stretch lace, then doubling the width is not required.
- For knitwear, corduroy and other dense fabrics, you will need to cut a long rectangle from which the tube will be sewn. First, cut the required length (using the head circumference measurement you took earlier), remembering to add 1cm from each edge to the seam allowance. Then cut to double the width, also lining the seam allowances. Seam allowance must be made on each side.
- Use necessary tools. Tailor's scissors are necessary for cutting fabric, as regular dull scissors result in an uneven, unsightly cut of fabric.
Cut off the elastic. Using your baby's head measurement, cut the elastic to the same length. Do not shorten the length of the elastic to create a tight fit on the headband, as part of the length will go into the seam, and you want to maintain as much stretch as possible. Having extra stretch will allow the child to wear the bandage longer and also ensure that the bandage is not too tight.

Sewing a headband

Sew the tube. Now you need to sew a tube from the cut piece. The tube will form the base of the dressing. It will go around the circumference of the head, and it is to it that the jewelry will be attached. Make the tube as straight as possible, although due to the stretch of the fabric, most imperfections will not be noticeable.
- Fold the rectangle of fabric in half lengthwise. If you sew from stretch lace, then this is not required. If using other materials, fold the cut rectangle of fabric in half lengthwise, right sides facing in.
- Pin the material with straight pins so that the fabric sections lie flat. Pins must be inserted perpendicular to the fabric sections. This will reduce the chance that the machine's needle will hit a pin if you forget it in the fabric. Also, this arrangement of pins makes it possible to sew directly on pins.
- Sew along the long edges of the fabric, 1cm from the edge. Use a needle, thread and stitch that matches the type of fabric you are using. Knitted fabrics require a special knitting needle and a stretchable zigzag stitch. The same thing can be done manually, but it will take more time.
- Unscrew the tube. You can do this with your bare hands, but it’s easier to use a simple tool. The most common method is to use a small safety pin. Pin it on one end of the tube from the inside. Slowly begin to thread the pin through the tube. This will take some time, but the procedure itself is simple. Once the tube is inside out, you will need to iron it until it is flat. You can skip ironing if you're going for a looser, draped look.
Insert the rubber band. The elastic will allow the headband to stay on without the need to attach clasps or ties. This will also allow the bandage to grow with your baby. Also make sure you have enough elastic, as a bandage that is too tight will not fit your baby.
- Thread the rubber band into the tube. The easiest way is to pin a safety pin on one end of the elastic and thread the elastic into the tube. Make sure that when you pull the elastic through the tube, it does not twist inside.
- Sew the two ends of the elastic by hand or sewing machine. It's good to use a zigzag stitch. Again, make sure that the elastic is not twisted and lies flat.
- Sew the ends of the tube. Although at this step you can use sewing machine, but it's best to do this manually. Tuck the edges of the tube inward. Using small blind stitches, carefully sew the edges of the tube together. If you don't want to sew by hand, stitch the edges by hand, overlapping them slightly. In this case, the stitching will be visible, unlike hand sewing. When the edges are joined, the bandage is ready!
Headband decoration
1. Make a bow. Once the headband is ready, you need to add embellishments to it to complete the look. A bow is a classic decoration for a little girl that is easy to make. This is a good place to start when you first make a headband for your baby.
  - For the bow you will need ribbon. Try to get fabric tape, as plastic is not recommended in this case. Choose a ribbon that is the same color as the headband you just made and you'll generally like it.
  - Exist Various types bows. You can make a simple bow, similar to the one tied on shoelaces, or you can tie a more complex bow, such as is made on gifts. For a simple bow, just tie it. Use an extra few inches of tape to wrap it around the center and hide the knot. Sew or glue the bow to the headband.
  - For a complex bow, take a whole spool of ribbon. Take one end of the tape and make a loop out of it, about 5 cm long, then another loop on the opposite side. Continue making loops until the bow is full enough. Secure the middle of the bow with stitches and then hide them under an additional piece of ribbon, just like a simple bow. Glue or sew the bow to the headband.
2. Make a flower. You can decorate the headband with a flower. This looks great on little girls, giving them a fairy look. You can make one flower or many at once. You can use ready-made realistic artificial flowers from pressed fabric by simply gluing them to the headband, or you can make your own flowers.
  - Take strips of fabric 30 cm long and 2.5 cm wide. Try to choose a fabric color that contrasts with the headband, but still matches it. Any type of fabric will do, even plain cotton.
  - Stick this cloth onto the pipe cleaner, making it a little uneven. This will give the fabric a slightly draped look.
  - Twist the pipe cleaner into a flower rosette. If there is only one flower, it can be directly glued to the headband. Otherwise, first glue the flower or flowers (according to your intended design) onto a piece of felt. Trim the felt so that it is not visible when looking at the flowers from above, and then glue it to the headband.
  - You can make your own appliqués from felt. Simply draw a shape and cut it out from one or more pieces of felt. You can also do wool felting to create a 3D object and glue or sew it to the headband. It all depends on your skills and desires.
  - You can also use jewelry objects or decorative scrapbooking items to decorate the headband. Sew or glue them if necessary.
Warnings
- Children love to put everything in their mouth. Make sure that small parts attached to the bandage are secure.
- If the bandage is too tight, do not place it on your child's head.
- Make sure that the bandage does not slip down and get stuck on the child's neck.
- It is necessary to give a rest to the child's head from wearing headbands, elastic bands and other hair accessories after a continuous hour of wear.

Headbands today are fashion accessory. But vigilant mothers do not miss the opportunity to dress up their baby not only for beauty, but also to protect her ears from the wind.

Are you interested in how to sew a headband for a girl with your own hands? This master class, prepared by our reader, describes in detail a simple method of making a children's accessory from old t-shirt– a great opportunity to clear out your closet. If you don’t have unnecessary clothes, feel free to use knitwear. The thicker the fabric, the warmer the product will be. For summer it is better to choose thin materials.

First you need to measure the circumference of the child's head and cut out two identical rectangles from fabric. The length of each rectangle should be 10 cm longer than the measured circumference of the child's head. If you want a smaller bow, then the length of the rectangle must also be shortened. This example shows how to sew a headband for a nine-month-old girl with a head circumference of 44 cm. Therefore, the length of the cut fabric was 54 cm and the width was 10 cm.

Alternatively, you can use an old adult T-shirt if it fits correctly.

In this case, it was enough to simply cut a strip of fabric 10 cm wide.

The sides were already sewn together, the length was just right. The result is a “collar” like this.

Using a machine, it is enough to stitch the long sides of the rectangles, folding them with the wrong sides facing each other. (If the rectangles are not cut from a T-shirt, but simply from fabric, then you will have to stitch all 4 sides yourself).

Then turn it right side out through the small hole previously left. This hole can later be sewn up by hand. Now you need to straighten all the corners and iron the finished rectangle.

After this, the ironed rectangle needs to be folded in half and the semicircle of the child’s head is measured from the fold. In this case it is 22 cm (since the total circumference is 44 cm).

At this point you just need to stitch a rectangle folded in half.

To sew a headband with your own hands, you don’t even have to match the threads to the same color, since all the seams are hidden inside. As a result of this seam, a “fish with a tail” is obtained from a rectangle (this is a top view)

This “fishtail” must be laid out on different sides, and it will subsequently become a bow. All that remains is to make a jumper for it. You can choose any decorative one with rhinestones to suit your taste. Or you can simply cut out a small rectangle from the same fabric and fold it in half with the wrong sides facing each other.

In the same way as the main large rectangle, stitch and turn it right side out. Use this jumper to gather the “fish tail” at the seam and fix it in this position.

Do you play sports? You lead household? Do you want to long hair didn't they bother you? We present to you the author's detailed master class how to make a bandage with your own hands.

Materials and tools

To create a headband with your own hands, you will need the following materials:

— knitted fabric (3 different colors);
- tulle fabric;
- a beautiful button;
- rubber;
- thread and needle;
- centimeter;
- chalk (or soap);
- pins;

Notes for the master class

It’s better to sew on a machine, it’s faster. If the machine doesn't sew knitted fabric, then you can put satin ribbon or a thick piece of fabric along its entire length.

1. Take knitted fabric. In this master class the color is soft pink. We measure the circumference of the head with a centimeter. Mark the length of the bandage on the fabric with chalk. Head circumference minus 2.5 cm. We can make any width. In this example, about 10 cm.

2. Fold in half and secure the bandage with pins.

3. Sew by hand or on a sewing machine.

4. Turn the bandage over to the other side. We bend the fabric and sew the edge of the bandage by hand, then tighten the thread.

5. Insert the elastic into the bandage and sew it on. The width of the bandage should be equal to the width of the elastic band.

6. On the other side we do the same.

7. The next step is to decorate the bandage. From gray knitted fabric we cut out a small strip, about 18 cm long and 4 cm wide. We sew and tighten the thread. Sew the ends together.