How to clean raccoon fur at home. Effective and gentle cleaning of fur at home

To extend the service life of fur items, it is important to store them correctly, and before doing so, remove accumulated dirt, dry it, and comb it. Cleaning fur at home is a delicate procedure. Thanks to the advice of experienced people, cleaning fur accessories will be within the power of everyone.

Stains and yellowness appear visually, but other types of dirt can be determined by a stream of cold air from a hairdryer. If the fur is clean, the fibers will fly away and then easily return to their place. Grease, deformed areas, saws, dirt, other stains - such areas need to be noted and cleaned.

Fur should not be washed to avoid deformation and baldness. It is also prohibited:

Dry with a hairdryer.
Place the product near heating appliances.
Dry under ultraviolet light.
Only outdoors, in a boiled room.
In winter - at room temperature, away from the battery.
There is a taboo on ironing, even with wrong side.
It is not recommended to use aggressive household chemicals and chlorine bleaches.

Mechanical cleaning methods are aimed at removing lumps, hair knots, dust, and dirt. At home, abrasive materials such as starch, semolina, chalk, talc, sand are used, which are used for grinding and polishing delicate items.

Chemical technology dissolve grease, paint, obsolete dirt. Their action is aimed at restoring the silkiness of the pile, increasing the strength and elasticity of the skin base.

Fur products can be cleaned at home, but you need to be careful not to damage the material. Experts recommend sticking to proven methods, guaranteeing a favorable outcome of this procedure.

Effective methods:

To restore the softness of the underside of the fur, the material is soaked in a solution of vinegar essence, salt, water (1:0.5:1), after which the fur is carefully stretched in different directions.
If the fur has become tangled or lost its shine, you can return it to its original shape using vinegar - gently wipe the product with a cloth soaked in the composition, without affecting the base of the pile.
It is recommended to lubricate a leather jacket with fur upholstery with glycerin water, you can use cosmetic product body care, this way the base of the collar will not harden and the product will be silky.
If the fur coat hardens when drying near heating devices, you need to treat it with alcohol or vodka diluted with water.
To soften rough spots, use vinegar essence, salt and water (2:3:1), apply warm until completely dry.
After smoothing the fur with your hand along the hair growth, which will give the product a fluffy, neat look, it is strictly forbidden to iron fur items, even from the inside out.

When drying, the fur coat should be hung on wide hangers, which will allow the material not to deform. Clean the hem, sleeve cuffs, and collar regularly. Abrasion of the collar is prevented by wearing a silk scarf, and the bottom of the sleeves - special muffs.

Before cleaning, place fur items on a table, ironing board or on the floor.

A few storage rules:

Before packing the fur coat, dry it on fresh air, carefully knock it out.
Place in a closet away from sunlight and humidity.
Suitcases or storage boxes are not suitable for this purpose.
For transportation, the fur coat must be placed in a ventilated paper bag or polyethylene cover.
Stuff the sleeves of the fur item with fabric or paper.
For a white fur coat, choose a cover made of blue material, so it will not lose its snow-white color.
To protect a fur product from moths, place citrus peels and geranium inflorescences on a cabinet shelf.

Natural fur product

Cleaning things from natural fur can only be dry, or with a minimum amount of water. The skin - the base - under the influence of liquid is deformed, becomes rough, and loses its grooming.

You can safely clean natural fur at home using proven methods. Fox, arctic fox or silver fox are animals whose skin is often used to sew fur clothing and individual items.

They are cleaned with the following compounds:

Dilute the pet shampoo in warm water, apply to a sponge, gently rub the pile, then blot the surface of the product with a cotton cloth.
Mix colorless dish gel, ammonia, dilute with water (1:1:1), wipe the surface of the pile, dry with a towel.
Grease stains are removed with purified gasoline diluted half with water, problem areas are wiped with a cotton swab dipped in a toxic liquid, and then the wool is cleaned with wet wipes.
Using flour, starch, bran or semolina, you can polish the product and return it to a representative appearance. To do this, the prepared product is heated in a frying pan to 70 degrees, then rubbed into the pile, after a few minutes the cleaned surface is shaken.

Sawdust, which is sold in a pet store, is also suitable. Before cleaning, they are filled with a small amount of alcohol, and then distributed throughout the item so that the composition is absorbed into the fibers. Remains of sawdust are removed by shaking.

Cleaning items made from natural skins:

To clean goat, rabbit, and wolf fur coats, use ethyl alcohol, vinegar, and water (1:1:1). The surface of the product is treated with the resulting composition. Rub the pile with a cotton cloth until it shines. You can use an old sheet.
You can clean a mink coat or individual fur elements of shoes from dirt and dust with a solution of vinegar, water, and alcohol. Apply to the material or shoe, rinse off the remaining composition with warm water. When the fur is dry, comb it.
Rabbit wool can be easily cleaned with wheat bran, and beaver and muskrat wool can be easily cleaned with dry sand. You need to sprinkle the product, rub it with a brush, remove dirty sand as it gets dirty.
After the fox fur coat has dried, comb the lint with your hands or a wooden comb, since the lint is long. This material can be easily cleaned with animal bathing shampoo.
When cleaning an astrakhan hat or sheepskin coat, just shake the fur. To avoid loss of shape, insert crumpled thick fabric into the headdress.
Colored astrakhan fur is cleaned with rye flour, sand or semolina.

When choosing sawdust, you need to remember that softwood may contain resin. Even a slight release of it onto the fabric or pile can lead to damage to the fur product.

Artificial

Clean artificial fur a little lighter than natural. This material is subject to wet cleaning, as it is made from synthetic raw materials. You can use a bleaching agent.

Methods for processing artificial leather:

For this purpose, you can use regular laundry soap. Dissolve the crushed particles of the bar in water, foam the composition, and apply with a sponge to the stains. Remove leftovers soap composition with a damp cloth, dry the sheepskin coat.
You can remove grease stains using potato flour and gasoline. Rub the soaked mixture into the product and brush off any remaining residue. Treat old stains several times.
Clean stains on collar artificial material Can household product for caring for furniture upholstery. Spray the aerosol at a distance of 15 cm from the stain and leave until dry. Remove composition particles wet wipe or blow it off with a hairdryer.

The use of acetone or vinegar is strictly prohibited, as this can damage fur items made from artificial materials.

White fur items

Light fur quickly becomes dirty, losing its neatness and attractiveness. To clean it, you need to choose cleaning products that will not cause yellowing. Be sure to check the composition from the inside of the fur product.

Proven methods:

For bleaching, use hardwood sawdust with purified gasoline - saturate the wood with a toxic composition, sprinkle it over the surface of the fur coat, after a few minutes shake out the remains, comb the pile with a comb.
To remove gray deposits on a fur hood, a mixture of hydrogen peroxide and alcohol is effective; wipe the fibers with a moistened cotton cloth and dry.
Whisk animal bathing shampoo until foamy, apply to the surface of the item, remove the residue with a sponge, and dry in a natural way.

Sheepskin often serves as insulation in jackets, hats, boots, and gloves. You can clean it by soaking it in warm water and using animal shampoo. To wash off the foam, rinse six thoroughly under a running stream.

To remove stains from dirt and dust, use boiled potato skins. Fur lining shoes are treated with petroleum jelly mixed with yolk, which will make the pile soft.
Greasy marks are cleaned with dishwashing gel. Leave the mixture on the pile; after 5–10 minutes, remove the remaining mixture with a damp cloth. It is recommended to remove all stains promptly to avoid deformation of the product.

Cleaning stains

Any cleaning method must be tested on the inside of the product to avoid damage to the fur coat or collar. It is forbidden to wet natural fur too much; dry it only naturally.

Cleaning stains using available products:

Old or hardened stains can be removed using gasoline mixed with starch to a creamy consistency. Apply the composition generously to the problem area, after 10–15 minutes clean the product with a terry cloth.
A great way to clean oil paint is with sunflower oil. Soak a cloth in oil and rub the stain against the lint. Ink stains can be rubbed off with acetone or white spirit. Remove leftovers chemical substances room water; add a few drops of lemon juice to add flavor.
Lipstick stains or foundation can be effectively removed with a solution of medical alcohol. Moisten a cotton swab and rub the stains. Use a dry sponge to restore the elasticity of the pile and fluff it up.
Remove shine from the collar with purified gasoline. Wipe with a cotton swab, wring out the fur, and add volume to the pile with a wide-tooth comb. Do not wet the pile to avoid clumping.
Stains from grease or sweat can be easily removed with a mixture of ammonia and salt, diluted with water (1:3:5). Use a clean cloth soaked in the mixture to treat the problem area. Fluff the product.

You cannot rub the fur intensively or wring the fur so that it does not fade or lose its appearance. Synthetic fibers can be wetted, but only if there is no cotton fabric base.

Removing yellowness

Yellow spots appear on fur items due to improper storage, the influence of environmental factors - solar radiation, perfumes, essential oils, sweat, dust accumulation.

Eliminate yellow tint on a white fur product you can use the following means:

Dissolve a spoonful of coarse salt and half a spoonful of ammonia in water, apply the solution with a wrung out rag, dry it and straighten the pile with your hands.
Wipe the fur with a cotton swab soaked in hydrogen peroxide.
Dilute animal shampoo with water, work into foam, apply to fur, and after a few minutes remove any remaining residue with a foam sponge.

Only regular high-quality cleaning of fur products will preserve their beauty, shine and attractiveness. It is important to act carefully so as not to spoil the pile!

You bought an expensive fur coat, you bought fur vest or snatched a hat at the annual sale, but after a while the fur of the product became shiny and lost its shine and color? Well, it happens to everyone! But knowing how to clean fur at home, you can very quickly restore the presentation of your “fluffy wardrobe.”

Before starting work, decide on the type of fur, because each of them has its own cleaning methods. Let's talk about them in more detail!

Arctic fox and silver fox

Fur coats or vests made from Arctic foxes and silver foxes can be easily cleaned at home, if, of course, you stock up on any of the products described.

Method 1 - ammonia

Method 2 – hair shampoo

To thoroughly clean the natural fur of the Arctic fox, use your own shampoo. An alternative would be pet shampoo, wool and silk detergent, or pure gasoline.

Chinchilla, muskrat, otter

The animals themselves clean themselves with sand. So why don’t you and I use this method?

Mink

To clean mink fur, you can safely use the following recipes.

Method 1 – vinegar and alcohol

Method 2 – ammonia, gasoline, water

Combine 3 tbsp. l. salt, 0.5 liters of water and 1 tbsp. l. ammonia.
Treat the shiny parts with a swab.

Rabbit, goat, nutria and wolf

Rabbit fur will withstand any cleaning just fine. To restore your presentable appearance, choose any of these recipes.

Method 1 - alcohol and vinegar

Method 2 – bran (suitable for cleaning a white rabbit)

Method 3 – knock out the dust

How to clean white fur?

How to clean yellow fur from white fur? Be very careful not to spoil the pile and natural shade. First, try the product on an inconspicuous area, and then move on to cleaning the surface of the fur coat. Gives a good effect:

Be sure to hang your fur item in a well-ventilated area to allow it to dry completely.

Important! If you spill wine, juice, sauce, coffee, tea on a fur coat, vest or sheepskin coat, take it to the dry cleaner! Don't take risks with a home remedy to avoid damaging your fur.

Artificial fur

Modern faux fur is made so beautifully that it cannot be distinguished from natural products. For “fox”, “raccoon”, “mink” - the cost of such products will be much cheaper. But this does not mean that faux fur does not require any care! Remember a couple of recipes that will help you clean it from dirt.

Method 1 - glycerin, alcohol and water

Method 2 – starch and dish liquid

Fill the starch with dishwashing gel.
Apply the paste to the faux fur and spread with a brush.
Wash off any residue with a clean sponge soaked in warm water. You can also leave the product until it dries completely, and then simply shake it off or brush it off.

Method 3 – machine wash

Unnatural fur coats can be washed in a machine on a delicate cycle. Spin cannot be used! Faux fur takes a long time to dry, so hang the product on a balcony or in a room with open windows. Make sure that it is not exposed to direct sunlight. However, this also applies to natural fur. The sun will make the pile brittle. It will also lose its shine and may turn slightly yellow.

Method 4 - gasoline for greasy stains

Glossy pockets, sleeves or fur collar wipe with a cotton swab dipped in pure gasoline. An alternative to it would be a liquid for cleaning carpets and upholstery. In this case, follow the instructions on the package.

Important! The products will have to be washed off with water or a damp cloth!

Method 5 – powder and water

This is the safest and easiest way to clean faux fur!

Prepare a soap solution by mixing washing powder (1 tbsp; should not contain bleaches) and 1 liter of water.
Cool this liquid and apply it to the fur using a cotton swab or a regular washcloth.
At the end of the process, wash off the foam with a clean cloth soaked in warm water.

Now you know exactly how and with what to clean fur at home. But don’t forget about the nuances, because they are very important!

Do not dry the fur item by hanging it on a radiator, ironing it or blowing it with a hairdryer;
For natural fur, washing is strictly prohibited. The flesh should not get wet!
Vinegar is contraindicated for faux fur;
Do not use sawdust from coniferous trees for cleaning - they contain resin;
Do not comb the astrakhan fur, just shake it well;
If the fur has lost its shine, soak a cotton cloth in glycerin or table vinegar and run it through the pile. Apply alcohol on top and comb the fur with a comb. Do not repeat too often - vinegar makes the fur hard;
To prevent the base of the fur collar from becoming rough over time, regularly treat it with a glycerin solution (1 part water and 1 part glycerin).

Video: bio-cleaning of fur:

Tips for caring for fur. How to properly clean its different types at home. How to preserve the shine and silkiness of fur, protect it from moths and deformation. Features of cleaning, washing and storage.

Spring brings with it not only bright warm sun and birdsong, but also new worries. For example, it is necessary to properly prepare and store fur items that will definitely no longer be useful to you in the coming warm days. And, of course, it is very important to thoroughly clean them first and remove stains. Many people decide to simply give their favorite fur coat to the hands of professionals - dry cleaning. But this service is not cheap, and you don’t always want to trust your personal belongings to strangers. Still, only their owner will handle fur products with the most care and attention. In fact, it’s enough just to clean the fur and remove stains from it at home using special products or folk recipes. More about them below.

First you need to find out whether the fur needs cleaning. The most will help with this regular hair dryer. It is enough to direct a stream of cool air onto the villi to determine their degree of contamination. So, if the pile flies away easily, shines and looks attractive, then the fur is not dirty and does not need additional cleaning procedures. If a stream of air does not inflate the villi, the fur does not shine and does not fly away, this means that over the winter a large number of dirt and cleaning is simply necessary.

Cleaning natural white fur

To begin with, it is worth noting that products made from light fur are the most capricious and short-lived. They get dirty and turn yellow the fastest. But it is quite difficult to clean them properly. By purchasing products from white fur, you should immediately take into account its tenderness and susceptibility to various kinds of pollution, and therefore wear them very carefully. It is accuracy in this case that will protect the owner of the fur coat from most problems.

You can clean white fur at home using hydrogen peroxide, which is sold in every pharmacy. 3% is best. Peroxide must be diluted with plain water in a ratio of 1/1, and then pour the resulting product into a spray bottle. As soon as the fur is ready for cleaning, it must be thoroughly sprayed with the resulting mixture, wait until it dries, comb and shake.

White fur requires special care

You can also use shampoo for dogs or cats for this purpose, which is sold in any pet store. This product will help rid white fur not only of dirt, but also of yellowness. To do this, you need to dilute the shampoo in warm water, moisten a rag from the resulting solution. natural fabric and process all the fur in the direction of its growth. After processing, you will need to carefully wipe the product paper towel, then dry, comb and fluff with your fingers.

You can also use semolina, wheat flour and potato starch to clean the white coat. Moreover, these products, as a rule, are always on hand for every housewife. For the product to be most effective, flour, cereal or starch must be preheated in a dry frying pan to approximately 70 degrees. The main thing is that the food does not burn, otherwise the fur may become very stained.

Cleaning natural fur of other colors

Fur of any other color with long pile can be cleaned of dirt with regular table salt. This is a very convenient way to clean at home. To do this, you need to sprinkle the fur with fine salt, and then walk over it with a brush. If the contamination is very serious, then it is better to use a solution of salt and ammonia. It is prepared very simply - salt and ammonia in proportions of 1/3 are mixed in warm water. Next, a brush is dipped into the resulting liquid to clean the dirty fur.

Colored fur can be cleaned with table salt

Rye bran, preheated in a frying pan, will also help clean dark fur pile. They need to be scattered over the entire fur product in an even layer, lightly rubbing, and then left for a couple of hours. After the time has passed, you need to shake the fur coat and clean the fur with a brush.

You can also use preheated sand for this purpose. The fur coat will need to be laid out on a flat horizontal surface, sprinkled with sand on top and lightly rubbed into the pile with your hands. Then the dirt must be shaken off and, if necessary, the procedure must be repeated until the sand is perfectly clean.

Cleaning faux fur

Faux fur needs cleaning no less than natural fur. Therefore, when putting it away in the closet until next winter, you should also take care of the cleanliness of such fur.

You can easily clean it using ordinary soap. Add a piece of soap to warm water or liquid product, and lightly beat the solution until foam forms. After this, you need to moisten a foam sponge in the resulting product and treat the contaminated areas of the pile with it. Once the fur is clean, the soap can be easily washed off with a clean, damp cloth. After this, the product must be thoroughly dried and combed with a blunt-toothed comb.

But under no circumstances should acetone and acetic acid be used to clean faux fur from dirt.

How to remove stains from fur?

The biggest problem when cleaning real fur products is stains. Getting rid of them is not so easy, but they can significantly spoil the appearance of a fur coat.

Stains from fur of any shade can be removed at home, for example, by mixing ammonia and denatured alcohol in equal proportions. Wipe the fur thoroughly with this mixture, then blot it with a clean towel and shake it out in the fresh air.

A stain on a fur item is not a problem

And gasoline and starch will help get rid of stains on light fur. To clean with this unusual product, you need to mix potato or corn starch with purified gasoline. The result should be a paste-like substance of uniform consistency, which is applied to the contaminated areas. Then this area must be carefully rubbed with a sponge or brush, after which the odorous mixture is cleaned from the fur. So that the fur coat does not save bad smell gasoline, immediately after cleaning it should be hung in fresh air.

To remove stains from faux fur, you can mix potato starch with dishwashing liquid. Ready product- apply to stains, wait until dry, and then brush them off.

You can also remove stains by wiping them with a cotton swab dipped in gasoline. Or use any means to remove stains from carpets and furniture upholstery. In this case, cleaning must be carried out according to the instructions that come with the selected product.

Can real fur be washed?

Products made from natural fur are strictly prohibited from washing. Otherwise, they may fade and lose their attractiveness, and the pile will become brittle and tangled.

And, in addition, shrinkage of the fur product may occur. However, their size can change very significantly.

But faux fur can be washed in a machine, choosing a delicate cycle. But this is only possible if the basis for the pile is a synthetic base, and not cotton.

After washing is completed, the product must be laid out to dry on a flat surface. Shortly before the pile dries completely, it should be carefully combed to prevent the appearance of lumps. But still, if possible, it is better to avoid washing even faux fur in favor of cleaning it.

How to make fur shiny?

Fur looks very beautiful when it is not only clean, but also shiny. To restore the shine of fur products, you can treat the pile with lemon juice, a weak solution of acetic acid or glycerin. It is better to apply any of these products to the product from a spray bottle, and then thoroughly wipe the fur with a paper napkin.

Fish oil helps make your fur coat shiny. For getting special means you need to mix 100 grams fish oil, 10 grams of laundry soap, 10 drops of ammonia, 1 liter of boiling water. While the water is hot, all of the listed ingredients must be thoroughly mixed, and then cool the finished solution to room temperature, apply to a sponge and treat the fur.

Shiny fur looks more beautiful

If the product has lost its shine only because it has become dusty, then a damp sheet will help save it from dust. To do this, the fur coat needs to be wrapped in cloth and then lightly knocked out.

If the fur is dark, then it can be wiped with walnuts crushed to a powder. To prevent the powder from scattering throughout the product, it must be wrapped in gauze, folded several times. The result will be a kind of swab with which you need to wipe the fur coat.

A special spray paint for suede helps to improve the appearance of fur products. It is especially convenient for tinting the ends of long piles. When spraying paint, keep the can at a distance of about 70 centimeters. After a certain area has been painted, it must be combed immediately. This will remove excess paint and separate the stuck together fibers. In order for the color to adhere well, the can must be moved slowly and evenly.

Some daredevils tint their fur coats with regular hair dye of a suitable color. But this method is very risky. You can never know for sure how the paint will behave on a particular product.

Rules for storing fur items

So, when the fur coat is put in order after a long winter and cleaned of all kinds of dirt, it’s time to carefully pack it for storage. summer period. How long this product will serve its owner and its appearance next winter depends on how correctly this is done.

It is best to dry your fur coat in the fresh air before packing it. The main thing is that it hangs in the shade and not in the sun. As soon as the fur product has dried thoroughly, it will need to be carefully knocked out.

As for the place to store fur coats, it is best to choose a shelf in the closet, where there is no direct sunlight, and where there are no radiators, pipes or any heating devices nearby. The room should have moderate humidity and low temperature. Fur needs to “breathe” and at the same time it cannot lie close to other items of clothing.

There is one secret how to protect white fur from yellowing during storage. To do this, you need to choose a case for the product. of blue color. It has long been believed that it is blue fabric that allows light fur to retain its brightness for a long time. You can, for example, sew a cover for your fur coat from blue material.

It is also important to ensure that the fur does not absorb any unpleasant odors. Therefore, it is not advisable to smoke, use essential oils or other products with a strong odor near the place where fur coats are stored.

Also, before storing fur products in the closet until next winter, you need to protect them from exposure to moths. You should not use naphthalene for this purpose. It is better to seek help from more effective, safe and pleasant-smelling products. For example, use tobacco (leaves), citrus peels or geranium leaves. And, of course, in modern stores you can buy the most different means from moths.

By the way, for the same purpose you can use essential oil sweet orange. By adding tampons soaked in this product instead of storing a fur coat, you will not only protect your fur products from moths, but also imbue them with a pleasant aroma.

Proper cleaning and storage of fur coats and other fur products will keep them in excellent condition until next winter. Thanks to such careful care, fur coats, hats, vests and other outfits will serve their owner faithfully for many years, will decorate him and keep him warm in the most severe frosts.

From time to time, fur items need to be cleaned. Specialized dry cleaners will do the job, but you'll have to part with a fair amount of money. Not all people know how to clean fur at home, so it’s worth looking into this issue in more detail.

How to clean a fur collar at home

Jackets or coats have fur elements, which are much easier to clean than a whole fur coat. To begin with, it is recommended to unfasten them - fortunately, this option is provided in almost all models. It’s easy to clean a fur collar at home on your own. First, you need to determine the origin of the stain, and, based on this, choose a cleaning method, since each stain requires a special approach.

Rhythm of life modern man often forces you to refresh yourself on the run. As a result, stains from sauces or ice cream may appear on the collar. Contamination should be immediately treated with a damp cloth. If the stain was not noticed in time and had time to dry, then you can apply glycerin to it, and after some time remove the dirt with a damp sponge.

For serious cases, you will have to use the following recipe:

1 part table vinegar;
1 part water;
1 part pet shampoo.

Mix all the ingredients and apply to the fur so as not to wet the undercoat. After some time, remove the residue with a damp cloth or cloth.

Fur coat

From time to time housewives wonder: is it possible to wash fur? Natural fur products cannot be cleaned in this way, since the inner skin, the tanned leather from which the villi grow, may be damaged. Some people try to wash fur clothes in washing machine. This can be done only with some types of faux fur, setting the delicate mode or program for washing wool. It is recommended to use liquid, enzyme-free synthetic detergents.

Using sawdust produced during the processing of birch wood, you can clean your fur coat at home. They are dried, mixed with purified gasoline and rubbed between the hairs. The next day, shake or vacuum the product. Shampoo for bathing cats is also good for these purposes. It is mixed with water and whipped into foam, after which it is applied to the fur coat, kept for several minutes and removed.

A fur coat does not always need complete cleaning. Sometimes it’s enough just to give it its original shine. The following tool is suitable for this:

10 g of laundry soap;
12 drops of ammonia;
100 g of animal fat.

All components are dissolved in a liter of water. The solution heats up, after which it must be cooled and applied to the surface with a sponge. After some time, carefully remove the residue with a damp cloth.

Fur hat

All methods used for cleaning collars are also suitable for processing hats. You can clean a fur hat at home using steam. Whether a steam cleaner or an iron is used does not matter. The jet is directed onto the hairs, after which the garment must be dried. An excellent refresher is a solution of lemon juice and water (in equal proportions). The sponge is soaked in the prepared mixture, then wrung out thoroughly and the fur garment is wiped. When the treated hat is dry, you need to comb it.

Fur on boots

The fur trim on shoes constantly gets dirty, so to maintain the proper appearance, you need to take care of it as carefully as possible. It is recommended to clean the fur on shoes and boots with steam. If you constantly carry out such procedures, then the edge will always look decent. It happens that steam does not cope with contamination - in this case you need to try another, more effective method.

Fur on a sheepskin coat

A natural sheepskin coat provides great warmth in the cold winter, and also looks stylish and fashionable. How to clean fur on a sheepskin coat? First, you should try combing the hairs with a pin brush designed specifically for this purpose. If the contamination remains, you can heat sand or bran from rye or wheat in a frying pan, apply it with massage movements to the pile, and then remove everything with a stiff brush.

Cleaning fur at home

Since fur products are an expensive pleasure, cleaning them must be approached consciously and competently. If you had to start cleaning fur at home, you should consult with specialists. It would be a good idea to study the product label, which provides recommendations for maintaining the clothing. Manufacturers recommend using mechanical and chemical methods for cleaning fur products. The first method involves brushing or cleaning with abrasive agents, and the second involves the use of special industrial solutions.

How to clean fur at home? For example, a beaver or otter fur coat can be cleaned well with sand. You can renew an old fur item by using potato peelings passed through a meat grinder with the addition of ammonia. Please note that light fur coats cannot be cleaned with bleach or products containing dye. A mixture of gasoline and denatured alcohol can easily clean greasy cuffs, hems and collars of fur coats. After cleaning, the products must be thoroughly dried. It is better to do this in a shaded place, away from sunlight and heating devices.

Artificial fur

Nowadays, faux fur is not only used to make beautiful things, but it is also used in the interior, in the manufacture of pillows and sofas. There are several options for cleaning faux fur at home:

Use an industrial cleaner for wool carpets. It is applied according to the instructions and removed with a vacuum cleaner or a damp cloth.
try making a folk remedy. To do this, you need to mix starch, washing powder and dishwashing gel. Apply the resulting solution to the dirty area and leave until it is completely dry. Remove any residue with a brush.

Natural

Cleaning natural fur is a responsible task, so you should pay attention to the length of the pile. Fried is good for long cereals or salt, and short-haired products are cleaned with calcined sand. Sometimes all it takes to clean is to remove dust and dirt from a fur item. To do this, the product is laid out with wool on a damp cotton fabric and they knock out well.

White

How to remove yellowness from fur so that it shines in a new way? Restore White color Hydrogen peroxide (3%) diluted with water will help. The resulting solution is placed in a container and sprayed over the surface of the yellowed product. After the fur coat has dried, the fibers need to be combed. A solution prepared from water and a small amount of blue is good at removing yellowness. Moisten a sponge with it and gently wipe the hairs.

How to clean fur at home if it is white or has a light shade? For these purposes, use semolina or starch. Before cleaning white fur, grain is poured onto the lint, then the item is rubbed with your hands as if it were being washed. After this procedure, the product is thoroughly knocked out or cleaned with a vacuum cleaner until the grains are completely removed.

Arctic fox

Experts recommend using a number of methods to clean arctic fox fur at home. Purified gasoline can effectively cope with any dirt, yellowness and give a dazzling shine to the fox fur. You need to take a foam sponge, moisten it with the prepared liquid and wipe it with special care so as not to damage the pile. To remove residual odor, the wool is sprinkled with starch and then knocked out or vacuumed.

Mink

Mink coat often dry cleaned. For this purpose, semolina, starch, and talc are used. It is important to know that moths are very fond of fur items made from this animal, so when choosing a cleaning product, you should thoroughly clean the product and comb the lint. Mink fur can also be cleaned using the wet method at home. You need to take alcohol, apple cider vinegar and water. Mix the ingredients in equal proportions and apply to the hairs with a soft bristle brush. Remove any remaining product with a damp sponge.

How to clean silver fox fur at home

You can try to tidy up an expensive item using potato starch or corn flour. Sometimes ammonia or peroxide is used for easy cleaning to simply add shine to the product. To clean silver fox fur at home, use purified gasoline or the following method: wrap the teeth of the comb in cotton wool moistened soap solution, and carefully comb the product, and then remove any remaining product.

Rabbit

Because the rabbit fur coats They do not last very long, so you need to take special care of them. There are several ways to clean rabbit fur at home:

wrap the clothes in damp cotton fabric and beat them thoroughly using a beater;
apply vinegar to the swab and wipe the rabbit fur - this will refresh it and add shine;
Spray hydrogen peroxide onto the hairs and leave in the sun for twelve hours.

Sheepskin

There are several ways to care for the tsigei - knocking it out or vacuuming it. How to clean sheepskin at home? A mixture of water, flour and washing powder is very effective means. Flour is sprinkled onto the fur, then sprinkled with a solution of water, soda and washing powder. A paste should form on the surface, which must be rubbed into the chicken pile. When the applied mixture dries, it is shaken off the product, after which the sheepskin is dried and combed. It is best to clean a mouton fur coat using a soap solution.

Astrakhan

It is quite possible to bring products made from this type of fur into proper shape using improvised means. It’s convenient to clean astrakhan fur at home laundry soap, gasoline or alcohol. Vinegar, which is used to wipe the surface of a fur coat, has proven itself to be quite good. After the procedure, the products are hung outside to remove the smell. You can also moisten a sponge with soapy water and wipe the astrakhan item with it.

Raccoon

This type of fur is the most whimsical and needs to be carefully and carefully looked after. It is very soft and delicate, so to clean raccoon fur, you should resort to the dry cleaning method. Semolina or starch are suitable for this. One of effective ways to get rid of dirt and tangles - comb the fur item with a wide-toothed comb, which must first be wrapped in damp cotton wool. You can break the fur with your hands, but this task is difficult and painstaking.

Video

How to clean fur at home? Given the great popularity of fur products in the harsh Russian winter, millions of people ask this question. Of course, unprofessional cleaning of valuable natural fur, especially light-colored ones, can harm the products, but if you approach the process thoughtfully and carefully, then cleaning even mink or sable at home will not be difficult.

It is important to remember that the products used often depend on the type of fur, so before using any folk remedy It is better to consult experts.

When organizing the house cleaning process, you should remember that the fur of different animals in its structure can differ significantly from each other.

Products made from natural fur belong to the category of high-value goods, and they provide their presentability with an attractive, rich appearance, emphasizing the wealth of the owner. Naturally, in such circumstances, any contamination is considered a major flaw that should be dealt with immediately, effectively solving the question of how to clean natural fur at home.

Products made from natural fur belong to the category of high-value goods, and they provide their presentability with an attractive, rich appearance, emphasizing the wealth of the owner

The most popular is the fur of fur-bearing animals, such as arctic fox, fox, mink, chinchilla, muskrat, seal, sable, marten. Cheaper fur is provided by rabbits and nutria. Natural sheepskin and astrakhan fur are widely used. Peculiarities appearance is ensured by the following parameters: thickness and length of hair, shine, softness, color, quality and strength of the skin base, tendency to curl the pile.

Large and small items of clothing and footwear are produced from fur or using fur elements. Large items include fur coats, sheepskin coats, coats, capes, coats, jackets, vests, etc. Of the small items, special mention can be made of hats, collars, gloves, capes, muffs, boots, and finishing elements. Naturally, the question of how to clean fur at home largely depends on the size of the product. Large items are difficult to clean at home, which is why dry cleaners are often preferred. But for smaller products, the problem of how to clean fur at home must be solved independently.

Cleaning sheepskin coats at home

The reasons for the need for cleaning may vary. The most typical factors are:

significant dusting with the formation of plaque;
loss of color uniformity as a result of contamination;
the appearance of garbage particles among the pile;
a loss natural shine and silkiness;
the presence of lumps, nodules and other felt formations;
the appearance of noticeable spots;
yellow on light colors and white on dark fur.

Owners of things made of white fur find themselves in the most difficult conditions, where the slightest yellowness or grayness catches the eye.

When organizing the process of cleaning your home, you should remember that the fur of different animals in its structure can differ significantly from each other. Don't look for all-purpose cleaners. The question of how to clean mink fur at home is solved differently than, for example, the question of how to clean rabbit fur at home. Each type of fur product has its own characteristics that must be taken into account when planning work.

Basic principles of the process

The cleaning process can be based on mechanical and chemical principles. Mechanical methods for cleaning fur include removing various lumps and hair knots by combing. Mechanical methods also include using a brush to remove dust and dirt. Another option is the use of abrasive materials (starch, semolina, chalk, talc), which actually abrade the dirt (grinding, polishing).

Starch for cleaning fur products

Chemical technologies are based on the use of various substances that can dissolve fats and other contaminants or react with them to form easily removable compounds.

For cleaning fur products

Even washing the product using detergent may be attributed to chemical exposure. When cleaning, various substances perform the following tasks:

dissolution of grease, paint and other noticeable contaminants;
restoration of the natural shine and silkiness of the pile;
increasing the elasticity of the skin base and others.

Basic requirements for the tools and methods used:

safety for humans;
avoiding damage to the structure of the pile and skin base, as well as woven areas when cleaning combined clothing;
ensuring color consistency and saturation.

Important! It is especially important that when cleaning light-colored items, streaks do not occur.

In principle, the cleaning process can affect only a specific area (local or local cleaning) or extend to the entire product (general cleaning).

Semolina for cleaning fur products

On a note! If there is contamination in the form of stains, local cleaning is usually used.

Features of caring for light fur

How to clean light fur at home?

Caring for light fur

This is a difficult but completely solvable task that requires maximum care. We can recommend the following technologies for cleaning white and light fur products:

Wipe with detergent. It is best to use shampoo designed for washing pets, particularly dogs. This product is diluted with warm water, after which a woven swab is soaked in it. After squeezing a little, you need to treat the fur with a swab, moving it in the direction of the pile. After wiping, the fur is blotted with a dry towel and hung to dry naturally. Artificial acceleration of drying is not recommended.
Abrasive technique. Dirt can be removed using sawdust from hardwood (even better mixed with pine needles). To increase the effectiveness of the impact and eliminate mechanical scratching, sawdust is impregnated with gasoline. After this, they are evenly distributed over the fur surface and carefully manually rubbed into the fur. After completing the procedure, shake and comb the item.

Rubbing alcohol for cleaning fur clothing

The chemical effect on contaminated light fur is provided by a mixture baking soda with medical alcohol. The alcohol-soda proportion is about 3:1. A foam sponge is impregnated with this composition, and then the fur is processed in the direction of the pile with its help.
A solution of hydrogen peroxide (3%) will help in the fight against yellowness on white fur. This solution is diluted by half with water and evenly applied to the products, preferably using a spray bottle. Fur is dried only at room temperature. When carrying out the procedure, you should remember one condition: the composition should not get on colored fabric or suede.

Hydrogen peroxide for cleaning fur clothes

An abrasive method in the fight against yellowness. The method is in many ways similar to the option described above. Potato starch or wheat flour are recommended as ingredients. The material is first heated at 70-75°C in a frying pan (burning is strictly not allowed). Used to process slightly warm powder which is applied to yellow spot. For 5-7 minutes, it is actively rubbed into the area of contamination. The powder is removed by shaking the item and then carefully combing the lint.

Features of cleaning various furs

The fur of different fur-bearing animals requires certain conditions.

Table salt for cleaning fur clothes

Taking these features into account, the following recommendations can be offered:

How to clean mink fur at home? Cleaning can be done dry or wet. Dry technology is based on the use of talc, which is carefully rubbed into the dirt by hand. As a wet technology, it is popular to use a mixture of vinegar and medical alcohol in equal proportions. The composition is applied to the fur using a sponge and blotted with a dry cloth. If local contamination occurs, you can use pure gasoline. The following composition is often recommended: table salt (60-70 g), ammonia (30 ml) and water (1 l).

Mink cleaning can be done dry or wet.

When cleaning rabbit fur, a mixture of ammonia and hydrogen peroxide is often used at the following rate: peroxide - 1 tbsp. l., ammonia - 2-4 drops per 250 ml of water. This solution is applied to the fur for 15-20 hours, and it is advisable to ensure drying under sun rays. Another option is to sprinkle the fur with wheat bran heated to a temperature of 45-50°C.

Acetic acid is an excellent cleaning agent for fur clothing.

How to clean chinchilla fur at home? Chinchilla fur, as well as raccoon and silver fox fur, are dark fur varieties. IN dry cleaning you can use the following liquids: pure gasoline, a mixture of medical alcohol, vinegar essence and water (in equal proportions), a mixture of table salt and ammonia (at the rate of salt - 4 tablespoons, ammonia - 1 tablespoon per 1 liter of water You can ensure cleaning with a vinegar solution (8-9%).

Chinchilla fur is classified as dark fur varieties.

How to clean sheepskin fur at home? The most popular use of a composition based on hydrogen peroxide. The solution is prepared by diluting 1 tbsp. l. peroxide in 1 liter of water. When cleaning, the top of the pile is moistened so that the base is not heavily exposed to liquid. Another way to solve the problem is a mixture of potato starch and aviation gasoline. This method is especially good for cleaning boots with fur trim. The problem of how to clean astrakhan fur at home is solved in a similar way.