Kanzashi wedding decorations - performance features. Kanzashi wedding decorations. With your own hands, photo review Wedding kanzashi

Kanzashi are Japanese floral ornaments that have traditionally been used for hair. IN Lately they have gained great popularity, especially as accessories for the wedding image of the bride. Now it is called not only the jewelry itself, but also manufacturing technique.

Kanzashi scallop for a wedding for a bride

Kanzashi jewelry for wedding

Literally, "kanzashi" means the word " hairpins". They served not only as decoration, but also as a means of protection, thanks to the pointed end. An accessory is made of satin fabric or ribbon, which is folded according to a certain pattern, reminiscent of origami technique. The result is a very beautiful and elegant decoration.

Hairpins, tiaras, bouquets, brooches and combs are made in the kanzashi style. In the composition, you can use one bud or several, located in volume or along one line.

Wedding kanzashi is not suitable for every dress, so you need to carefully consider the choice of outfit. A classic dress with fluffy skirt and a hairstyle decorated with Japanese flowers.

The best solution would be combine kanzashi with dress from satin, silk or jacquard fabric. You can choose any style and length, but an A-line dress with a fitted bodice would be ideal.

With kanzashi decoration, a dress with wide trim looks great. satin ribbon on the belt. But using the oriental style is not necessary at all, since kanzashi-style wedding decorations have long become a European decoration.

Kanzashi necklace for the bride

DIY kanzashi hairpins for a wedding

Sometimes it’s difficult to find an accessory that matches the color and style, so it’s easier to make it yourself. Detailed master class for the manufacture of kanzashi jewelry for the wedding for the bride's hairstyle help you make it yourself.

What you need for work:

• satin ribbon 5 cm wide;
• metal pin;
• small button;
• transparent rhinestones or halves of pearls;
• thread and needle;
• scissors;
• tweezers;
• lighter (candle, matches);
• glue.

How to do:

1. Cut the tape into equal squares. For each hairpin, 9 pieces of such squares will be required.
2. Bend the square of the tape diagonally and grab the bottom corner with tweezers for convenience. Fold in half again.
3. Bend the upper triangle in half from the left side to the right. Do the same with the bottom triangle.
4. Trim the open corner with scissors so that it is neat and lightly scorch over the flame so that the layers of fabric stick together. If a candle is used, then the fabric should be kept in the middle of the flame so that it does not get sooty.
5. The bottom of the resulting petal is carefully cut with scissors and also melted with fire.
6. Gently spread the petal to give it a convex oblong shape. To create one inflorescence, you need 6 petals and 3 smaller ones. You need to perform them using the same technique.
7. Thread the needle in the appropriate color. First, string large petals, tie a thread and cut off. The first tier of decoration is ready.
8. In the same way, string three small petals on a thread - they will serve as the second tier.
9. Hot glue is best for gluing parts, but you can also take the usual transparent “Moment”. Pass the hairpin through the button.
10. Apply a large drop of glue to the button and press a large inflorescence of satin ribbon against it. Wait until the glue is completely dry.
11. In the middle of the flower, apply another pea of ​​glue and press a small flower. Glue a rhinestone or pearl into its core.

The original decoration for the bride's hairstyle is ready!

Kanzashi petal preparation

Kanzashi hairpins for a wedding

Bouquet-understudy in the technique of kanzashi for the bride

The tradition of throwing the bride's bouquet to unmarried bridesmaids has not lost its popularity. But often the bride is sorry to part with her bouquet, so for this purpose understudy is used. It is easy to make such a kanzashi composition with your own hands - the bouquet will turn out to be very elegant and festive if you use this technique.

To prepare a double bouquet, you need buy the following accessories:

• satin ribbon different shades: for flowers, leaves and handles;
• cardboard roll (for example, from food foil);
• foam ball;
• scissors;
• wire;
• openwork tape;
• more decorative details (rhinestones, beads, pearls);
• thermal gun with transparent glue.

To prepare one flower, you will need about 40 cm of tape: 11 pieces 2.5-3 cm wide and 7 cm long

How to do:

1. Bend the edge of the tape into a triangle and hem with a thread of a similar shade. Pull the thread in so that the ribbon gathers into a kind of petal. Prepare 10 more parts in the same way.
2. Cut off 5 cm of wire with a diameter of about 6 mm. Fold one end into a small loop.
3. Lubricate the edge of the petal with glue and wrap around the wire loop. Attach 2 more petals in a circle - you get a bud.
4. Next, glue 3 petals in a more straightened form, and 5 more petals in the third row - you get a rose.
5. Cut the green satin ribbon into pieces with sides of 5 cm. Fold in half and singe the edges over the fire. Drip a little glue on the edge and press the leaves under the flower bud.
6. Cut the foam ball into 2 identical parts - you only need one half. Cut a place in it so that you can insert a cardboard roll.
7. Cut the roll so that a neat little handle remains, which is comfortable to hold in your hand. Coat the edge well with glue and insert into the foam base.
8. When the glue is completely dry, wrap the handle with tape and secure with glue.
9. String roses on a ball with hairpins or glue them so that there are no empty spaces left.
10. Additionally decorate the composition rhinestones or beads, feathers - as fantasy tells.

kanzashi wedding bouquet

It’s so easy to make unusual, attention-grabbing kanzashi wedding decorations for the bride with your own hands. It will look harmonious groom's boutonniere, made in the same style, as well as small holiday details, for example, invitation cards or wine glasses of newlyweds.

Preparing for wedding ceremony requires a carefully thought-out plan, script, and kanzashi wedding decorations will perfectly convey the sensual atmosphere of the holiday. A wedding is a unique event in the life of every person. For perfect wedding, it is necessary to take into account all sorts of little things and nuances. The underlying theme is design and decoration, so most newlyweds choose the style and technique of decorations in advance.

Kanzashi design master class for holiday accessories

Kanzashi style came from Japan, quite elegant, created with ribbons and materials handmade. Due to its simplicity, it began to be used on all continents of the planet for a variety of events. To highlight all these elements on a holiday, you need to know the rules for creating decor in this style. This style can be easily done on your own, this is its charm and uniqueness.

On any festive table there are wine glasses, champagne. From time immemorial, boutonnieres convey the unique image of the groom, flower baskets will be a great addition to the main design. To decorate a wedding champagne bottle using a similar technique, you need to purchase the following materials:

1. satin ribbon of any color;
2. brocade ribbon in gold color;
3. glue;
4. bottle;
5. scissors.

Direct registration involves the following steps:

• measure the satin ribbon from the neck, determine the required amount;
• having measured and determined the required amount, cut the tape and apply glue;
• wrap the bottle with tape, closing the label. Be sure to stretch the atlas in order to smooth out the bumps;
• the second and subsequent cut ribbons will be longer than the first, with them it is necessary to repeat the actions carried out over the first piece of fabric. After all the manipulations, glue the tapes;
• a golden ribbon is glued to the bottle in two rows;
• glue the material to the bottom of the bottle, on top of the spoiled tape, glue two pieces of satin ribbon, which was used at the beginning;
• cut 8 pieces of fabric, attach so that the seams are on the back of the bottle side;
• with a clerical knife, an incision is made at the suture edge, thread the tape into it;
• drop glue into the base and distribute it along the entire tape length;
• we use golden fabric to close the gap, cut corners;
• glue lace, beads, ribbon bow.

Decorating glasses with your own hands

The main attributes on the table, except for champagne, are the glasses of the newlyweds. To decorate glasses in the style of kanzashi, you will need the following accessories:

1. ribbons of satin fabric, white and silver colors;
2. elegant and lace braid;
3. decor elements
4. candles;
5. nail polish white color;
6. scissors and glue;
7. wine glasses.

To complete the decor correctly, you must follow the order of the following steps:

• cut the silver ribbon into two pieces;
• glue two thin strips to the wine glass so that they turn out in a cross-shaped form;
• wrap a silver ribbon with a white cloth;
• to twist with an elegant braid, already woven previous ribbons;
• glue the lace on top;
• glue beads and rhinestones along the edges;
• near the decor of rhinestones, make varnish dots;
• white ribbons cut in the shape of a square will help create a flower;
• to prevent shedding of threads from the ribbon, the edges must be singeed;
• square corners connect and scorch with fire;
• solder ten similar petals together to make a bud;
• glue a rhinestone in the center of the flower;
• glue the flower at the intersection of the ribbons.

Ribbon boutonniere

Grooms' boutonnieres are the main and well-established attribute at a wedding. Such accessories lend themselves perfectly to self-creation, without the involvement of designers and designers. The remarkable thing about boutonnieres made in the form of kanzashi is that they are unique, non-standard. To make the groom look amazing in all the photos, you will need the following accessories:

1. satin ribbons of different colors;
2. needle and thread;
3. candle;
4. scissors;
5. beads, rhinestones, etc.

In order to perform the accessory directly, it is important to go through the following steps:

• cut satin ribbons into pieces;
• blanks are singeed so that the threads do not crumble;
• the finished element must be connected in the middle, bend the other edge back. If you connect at an angle of ninety degrees, you get the petals of a flower;
• it is important to repeat similar actions with other pieces of tapes;
• the edge of the blanks is sewn with a thread;
• collect all the blanks and a common bud is going;
• it is important to remember that the three flowers must differ in size;
• then, it is necessary to stretch the thread through a large, medium and small bud, so that the small one is at the end, it is desirable that the flowers differ in color scheme;
• the accessory can be flashed several times, then fasten it with a knot;
• decoration is done using rhinestones, beads or other options that exist in fantasy.

In addition to decorating accessories, kanzashi is used different ways. Hair ornaments distinguish the bride, highlight her individuality and originality, complete the image. Any design in this style will please the young, add originality, cheer up.

Interesting video

Kanzashi technique came to us not so long ago from Japan. Originally, kanzashi are accessories for hair, clothes in the same style and color scheme as kimono (national Japanese costume). Jewelry has always turned out to be very elegant, made of satin ribbons and handmade silk threads. Therefore, these products began to be increasingly used on other continents as wedding decorations and accessories for other important events.

This article provides a master class on the implementation of such decorations. Here it will be described how to do Wedding accessories with your own hands from satin ribbons. Below in the article you will find video tutorials that will help beginners master this technique.

kanzashi wedding decorations: bride's comb

Introducing a master class on making a wedding comb.

For work you will need: white ribbons, one measuring 2.5 * 50 and the other 2.5 * 25 centimeters, green ribbon, hot glue, lighter, felt, fishing line with beads.

First, we take up the execution of roses, there will be 3 in total. The widest ribbon for the average largest rose. So, for starters, let's make a circle using a compass with a diameter of 5 cm from felt. Draw 2 lines from the center of the circle and cut out a triangle. After gluing the edges, we get a cone.

We glue the tape to the top of the cone along the back of the funnel with glue, then wrap the tape on the back side and glue it on top of the previous piece of tape. Now you need to roll the tape, forming the petals, fixing them later with glue.

Petals are formed by wrapping the edge of the tape over the previous petal, as if you need to constantly form a triangle. In the future, our triangles are laid out around the entire circumference of the cone. Having completely filled the felt cone, cut the tape at an angle, wrap it on the inside of the cone and glue it.

If preference is not given to roses, then buttercups can be performed. To do this, you need satin ribbons of two colors: one is a delicate beige color, the other is white in D \u003d 2.5 cm. We cut the ribbon into 7 identical squares. We round the squares with scissors, leaving only the base unrounded. Make 7 of these.

Then burn all the squares with a lighter. Do the same with the other tape. Then we take up the execution of stamens into a flower: we collect 9 beads of transparent yellow or any other color on a fishing line or thread. We string on the fishing lines. We connect at the base with each other.

We proceed to the assembly of the flower. Using a thread with a needle, we sew the petals together at the base so that the next petal lies exactly in the middle of the previous one. Then tighten the thread, tie a knot. Repeat the same with the squares of the other tape.

We insert the made stamens from beads into the base of a white flower, cut off the extra threads, glue them. Then we glue a flower of a different shade and attach it to the previous finished flower with stamens. Thus, the volume of the flower is created. We glue a circle with a diameter of 1 cm to the back surface of the finished flower so that it can be fixed on the product.

Then we take the comb, which the bride will later put on her hair, and cut out a piece of felt in the shape of the comb. We have three completed roses on a piece of felt. Then we trace around the edges of the rose and cut out the crest model more accurately.

In order to make leaves using the kanzashi technique, you need to: take a ribbon 6 centimeters long. We fold the ribbon in half, then cut it into the shape of a leaf. Solder the edges with a match or lighter. Again, fold the leaf lengthwise and form a central groove.

Singe the folded leaflet from the wrong side in the place of the intended groove and firmly press this place with your fingers. We continue to make grooves, also singeing and clamping the bends. We turn the front side of the sheet, bring it to the lighter and press it.

There is another way to make kanzashi-style leaves, and it's a little easier than the first one. We take the already cut out shape of the leaf, lay it on the wrong side on a soft cloth, preferably a towel. We heat the knife, you can use a match, you can use gas, and we make grooves by pressing on the leaf. Then we repeat all the steps on front side, only you need to retreat from the previous grooves about 4 mm, then the leaf will turn out to be voluminous.

We decorate the base of the comb with a fishing line with beads along the edge. We attach the leaves. Lastly, glue the roses or buttercups. The comb is ready!

Kanzashi wedding decorations: bride's bouquet

The kanzashi technique allows you to use ribbons not only for making hair accessories, but also for creating wedding bouquets from satin ribbons, boutonnieres and much more. In order to make a bouquet, you need: a round foam ball at the base of which you need to insert a wooden stick. Surround the ball with paper for the bouquet, glue it to the ball and stick. The base is ready.

Now you need to make flowers, as indicated above. For a bouquet, it is better to use or satin fabrics. bright colors, or organza-type fabric to make the bouquet seem more airy. After making the flowers, attach them to the ball. Such a bouquet will not wither for a very long time!

Video on the topic of the article

This decorative art is based on the ability to fold different petals from scraps of fabric. Petals can be: rounded, long or sharp. Craftswomen use tweezers to collect petals from small pieces of silk and glue them onto the base. This article will tell and show you how to make kanzashi wedding decorations correctly.

The word "kanzashi" (kanzashi) translated from Japanese is "hairpin". This art was invented by Japanese women. It was born when Japanese fashion included high hairstyles, which had to be fixed with various fastenings from hairpins.

To make a wedding decoration using the kanzashi technique, you need:

• Ribbons and fabrics of different shades.

Experienced craftswomen like to use satin ribbon fabric. This material is very flexible and easy to use. It is well suited for firing and is easy to cut with scissors, and most importantly, it always maintains the desired shape.

Crepe satin is also sometimes used, but it does not respond well to firing. If you overexpose a little over the fire, the product may burn.

You can also use organza. But when cut, the threads fall out of it.

• centimeter or ruler. Needed to measure the dimensions of the workpiece.

• A small bar of soap or a pencil. Useful for sketching.

• Sharp scissors. Suitable for cutting ribbons.

• Thread and thin needles. Needed for flashing crafts from ribbons.

• Small tongs or tweezers. They are convenient to press or take small parts. It is also convenient for them to hold the workpiece over the fire.

• Lighter, candle, matches or soldering iron. Necessary for singeing the ends of the workpieces. Everyone chooses what is more comfortable for him to work with.

• Base for decoration

Buy a simple hoop, elastic band or hairpin. On them you will attach ready product.

Glue must be used special, PVA will not work. You need to use glue that will quickly hold the pieces of fabric together. The ideal solution would be to purchase a glue gun. With it, you can quickly, and most importantly accurately, glue the workpieces.

• Decorations. For example: beads, rhinestones, beads, etc.

• Strong hold hairspray. They can sprinkle the finished product so that it does not lose its shape.

The most important forms of kanzashi petals

1. Sharp petals

A scheme that will help make sharp petals

2.Round petals

A scheme that will help to make rounded petals

Master class for making a wedding comb

You will need:

• White ribbons (sizes 2.5/50 and 2.5/25);
• Green ribbon;
• Glue (hot);
• Candle or lighter;
• Felt;
• Line and beads.

Let's start with making roses. For this product you will need 3 roses.

First you need to make a circle of felt with a diameter of 5 cm, for this a compass is useful. Two lines are drawn from the center of the circle and a triangle is cut out. After the edges are glued, you get a cone.

Now we fold the tape and form the petals, fixing them with glue. The petal is formed using the method of tucking the ribbon over the previous petal so that a triangle is always formed.

Now the triangles are laid out around the entire circumference of the cone. When they completely fill the felt cone, you need to cut the tape at a certain angle and wrap it into the inside of the cone. Now it remains only to glue it well.

This exclusive comb will decorate your hair and complete your wedding look.

What you need to create a do-it-yourself kanzashi wedding bouquet

The bouquet requires the purchase of certain accessories:

• Smooth stick for the legs of the bouquet;
• Funnel-shaped base;
• A foam ball that replaces the floral base;
• Rigid mesh or lace;
• Stamens (easily purchased at a specialized store);
• Scissors, wire and needle;
• Satin ribbon size 100/3 or 100/2;
• Thermal gun with special glue.

1. Preparing the base

Wrap the string around the foam ball, insert the stick into the ball and grease with glue. After the glue has completely dried, you need to wrap the stick with twine, and then rewind satin ribbon certain color. The base is ready.

2. We make flowers

To do this, you need to cut a circle from thick fabric and draw the notched segment. You need to sew a segment in the shape of a cone. This is done with a tape 2 cm wide, the edges are fixed with a needle and thread.

3. We fix the flowers

It is necessary to fix all the flowers on the base. They are decorated with feathers, beads, pebbles and rhinestones. Fasten the flowers with a heat gun.

Bouquet of kanzashi k wedding ceremony ready.