Simple and beautiful flowers from foamiran. A large flower from foamiran, a master class: a step-by-step description and reviews. How to make a lily flower from foamiran

A plastic foamiran peony is a rather lush, beautiful bud that even a novice master can make.

To conduct the MC, we need the following types of materials:

1. Porous foamiran. To make the craft as realistic as possible, purchase material no more than 1 mm thick. We need a dark green, dark pink and light pink canvas.
2. Fixation teip tape, which can be light green or green.
3. Acrylic water based paints. To make the artificial flower interesting and as realistic as possible, get a dark pink, marsh and yellow shade of paint.
4. Volumetric thick wire that will bend well, with a diameter of 1-1.5 mm. It will be needed to form the stem. For leaves, you need a small piece of floral or thin wire.
5. A set of art brushes, as well as foam rubber, from which you need to make a small sponge (or sponge).
6. Manicure scissors and a standard glue gun. You can use any manicure tool that will easily cut foamiran.
7. A beautiful mother-of-pearl stone, a voluminous bead or a piece of foil, from which the core of the bud will be formed.

We also need a pattern that can be printed or hand drawn. With its help, we will form the petals and components of our bud. When everything you need is on the table, you can start creating a peony step by step.

1. Cut flower parts according to our pattern.
   - A - 10 light pink petals;
   - B - 10 petals of a light pink shade and 5 blanks of a dark pink color;
   - C - 10 parts of a light pink shade;
   - D - 5 dark pink petals;
   - E - 5 dark pink parts;
   - Z - 3 leaves of a dark green hue;
   - M - 6 sheets of dark green color;
   - K and L - 5 gluing sepals of a dark green hue;
   - F - a blank in the form of a sun with rays, from which we will form an interesting core with imitation of stamens.

   From the existing image, we cut out the pattern, transfer it to a light pink foamiran and cut out a circle. After that, cut the rays with sharp ends.
   

   

2. Shading leaves and petals

   Using acrylic paint, we make a light tinting of the petals of our peony, trying to get the effect of a non-uniform color (sometimes darker towards the edge of the petal, then darker closer to the base). To do this, we need a small brush with which we paint over all the petals on both sides.
   

   
   The second stage is the creation of "reviving" leaves. For this, we also use the method of manual tinting. With a darker green paint, we paint over our foamiran leaves only on one side, and then draw the central veins in the center of the trefoil, distributing the paint from the center to the edges of the workpiece.
   

   
   
   

3. Corrugation of leaves and petals

   The initial stage will be the corrugation of the petals B. We fold the workpiece in small folds according to the "accordion" principle.
   

   

4. flower assembly

   We are preparing the base on which many peony petals will be fixed. To do this, we form a dense ball from foil, the diameter of which should not exceed 1.5 cm. If you decide to use a bead, then make sure that it has a wide enough hole. We pierce a hole in the foil ball, into which we fill the glue and immediately thread the prepared wire into the hole.
   
   
   We string the workpiece G onto the wire and tie all the upper parts with a thread, placing them above the bead.
   
   
   We dip the tips of the stamens in yellow acrylic paint, after which we attach 10 petals A to them, using a glue gun for this.
   
   
   We fix the petals B, folded like an accordion at the base, so that small folds are obtained. In this way we fix 10 light pink and 5 dark pink petals.
   
   
   The next row we glue 5 petals C, and behind them - in a checkerboard pattern 5 more of the same blanks.
   
   
   The pre-final stage will be gluing five petals D in a checkerboard pattern in relation to the previous ones.
   
   
   And the creation of the final row of the 5 largest petals E.
   
   
   We fix the sepals and begin to collect the leaves as shown in the photo.
   
   

   We decorate the hairpin with a lush poppy

   Red foamiran poppy is a great way to decorate any hair accessory or diversify a flower bouquet consisting of field plants.
   
   
   To create it, we need:

   • dense foamiran of black, green and red hue;
   • acrylic paint (red and white);
   • bright pastel and sponge for tinting;
   • simple threads, a piece of foil, an iron and curly scissors;
   • hairpin-machine without decorations;
   • glue, a manicure stick or a wooden toothpick, as well as phlox powder.

   When all the materials are ready, you can proceed to the master class. To do this, follow the instructions below.

   We draw by hand paper templates in the amount of 8-16 pieces. We need 4 small blanks - 5.5 * 4.5 cm, as well as 4 large ones - 7.5 * 5.5 cm.
   
   
   We cut a strip of black foamiran and process one side so that we get a fringe.
   
   
   We make the base from a ball of foil, the diameter of the workpiece is approximately 1.7-2 cm.
   
   
   We tint our petals on one side, using a sponge for this.
   
   
   Smooth out sharp corners with curly scissors.
   
   
   Lightly touching our petal with a sponge, we apply white paint on one side to the lower part of the petal.
   
   
   Cut out a circle from green foamiran, put a foil ball in the middle and begin to form a poppy head. We tie the ball with a thread as shown in the photo.
   
   
   Cut off the excess thread. We turn the ends over (turn out) and glue them. You can slightly tint the core first with red and then with white paint.
   
   
   We start assembling the flower by gluing the fringe.
   
   
   We form poppy petals by heating the material on the iron, which is in the “silk-wool” mode. We fold the warm blanks with an accordion, twist and slightly stretch the middle. We do this with all the petals.
   
   
   We paint the fringe a little white. We begin to glue the petals overlapping, forming rows. First 4 petals in one row.
   
   
   Then we glue the large petals below the first row by about 1-2 mm, also overlapping a little.
   
   
   We cut out the leaves and apply a texture to them, tinting with paint and shading it with a sponge on both sides.
   
   
   
   
   Glue the leaves, sprinkling them with phlox powder.
   
   
   The flower is ready. Now it remains for us to glue it to the automatic hairpin using a hole punch or glue. You can do your hair!

Artificial jewelry is widely used in the design of holidays, in interior decor and in the creation of women's jewelry. Foamiran flowers are especially popular, the manufacturing master class of which does not require special experience. Such flower decorations are very similar to natural ones, therefore they are very popular with needlewomen. Foamiran is called plastic rubber or suede, but let's see what this material really is.

What is foamiran and where to buy it

Foamiran is a new synthetic Iranian material, recently brought to Russia. Its name comes from the name of the issuing company "FoamIran". Foam is a popular material, because its rich color range allows you to create very realistic compositions and toys. The material easily takes any shape, and the volume of the workpiece is given by light heating with an iron. Foamiran is environmentally friendly, and you can buy it in needlework stores. At an affordable price, plastic suede is sold in online stores that deliver to any region of Russia.

How to make flowers from foamiran

Plastic suede is a malleable material, so even novice needlewomen can make flowers from foamiran using a master class as a step-by-step instruction. Any crafts will be distinguished by accuracy and realism. With the help of our master classes, you will learn how to make foamiran hairpins, stencils of flowers and leaves, patterns from which it will be easy to create works of art later. So, let's make different flowers from foamiran, and master classes with photos will help you.

Lily making master class

To make a flower, we need:

• leaf of green and white foamiran;
• stamens;
• acrylic paints;
• cardboard;
• felt-tip pen;
• thermal gun;
• wire;
• toothpick;
• iron;
• scissors.

Preparation method:

1. Make a 6 cm cardboard blank of a lily petal, cut it out.
2. Using this template, cut out 6 petals on white foam.
3. Toned them on both sides with a pink-lilac color.
4. To make the petals textured, heat them on the iron, drawing veins with a toothpick.
5. Heat the edge of the petal too, giving it a waviness.
6. With a brown felt-tip pen, make a few dots at the bottom of each petal, giving the flower a natural look.
7. For the pistil and stamen, prepare a 0.3 mm wire, stamens and small diamond-shaped pieces of plastic suede, dyed black.
8. Glue them to the wire.
9. Before assembling the flower, cut out the leaves on the green foamiran (foam).
10. Give the leaves texture by heating on the iron.
11. Glue the first row of petals (3 pcs) around the glued stamens to the pistil.
12. Glue the second row in a checkerboard pattern.
13. Glue the leaves as you like at the bottom of the lily.

Do-it-yourself poppy

Bright flowers from foamiran are very beautiful, and a master class in creating a red poppy will help you make sure of this. Poppies have long won love and attention for themselves, thanks to their simplicity, beauty and brightness, and absolutely anyone can handle their production, even if they pick up plastic suede for the first time. For the manufacture we need:

• red and green foam;
• cardboard;
• bead 2 cm;
• black threads;
• toothpick;
• glue gun;
• scissors;
• wire 20 cm.

Preparation method:

1. Draw a petal template on cardboard and cut it out.
2. Cut out a 6 cm circle of green foam.
3. Thread the wire into the bead, twist it, forming a leg.
4. Heat the green circle and wrap the bead around it, connecting the edges on the wire.
5. Fix the foam with black threads with an intersection point in the center.
6. Using a toothpick, circle the cardboard templates on red foam, cut out with scissors.
7. Fold the petals like an accordion, then twist them tightly with your fingers and straighten them - they will acquire a wavy texture.
8. Glue the petals in two rows to the base of the balloon.
9. Cut out two green leaves and score all around the edge, then twist and flatten for texture.
10. On the back of the bud, glue the leaves by cutting the wire.

MK chamomile

The modest wild flower is recognized as a symbol of the family, which is why "chamomile" weddings with artificial daisies have become popular. We will tell you how to make these beautiful foamiran flowers on your own in a master class. To create a flower we need:

• white foamiran;
• cardboard;
• oil pastel;
• ruler;
• glue;
• pencil;
• protractor.

Preparation method:

1. On the foam with a compass, apply the contours of circles (3 pcs) in 9 cm, cut out.
2. Then cut a strip 2 cm wide and 27 cm long to create the center, paint it yellow.
3. Fold the strip in half, glue along the edge, cut the fringe from the side of the fold.
4. Twist the core with a spiral, smearing it with glue.
5. Cut out a 9 cm cardboard circle, then use a protractor to draw cuts for the petals.
6. Use the resulting pattern to cut out the white petals.
7. Cut the petals, not reaching 2 mm to the core.
8. Heat the tips of the petals with an iron, round off, like a real chamomile.
9. Put the workpiece in the middle, glue it.
10. Make 2 more rows of petals in the same way, fixing with glue.

the Rose

You will need:

• 2 sheets of foam (green and pink);
• glue;
• foil;
• patterns.

Preparation method:

1. Cut out two cardboard patterns of different sizes, but the same shape of a rose petal.
2. Trace 5 large and 5 small petals with a toothpick on the foam, cut out.
3. Place all the petals against the iron, and pull the edge to make them wavy.
4. Roll up a ball of foil, wrap the first small petal around it into a cone, fix with glue.
5. Make a bud from the rest of the small petals, and glue the large ones on top, making the edges wavy with an iron.
6. Cut out 6 leaves from green foam, attach to the iron, then glue to the rose.

Ranunculus

You will need:

• a sheet of blue foam;
• toothpick;
• scissors;
• glue.

Preparation method:

1. Make 18 pcs. petals of various shapes and one strip measuring 2x10 cm.
2. Cut a small fringe on the edge of the strip with scissors.
3. Glue the fringe to the toothpick to make a roll.
4. On the overlapping roll, glue the larger petals first, and the smaller ones last.
5. Make the gluing with white foam so that you can paint over it with a pale blue color.

hydrangea and sunflower

Hydrangea, made at home with the help of foamiran, looks amazing. Working on its creation is very similar to creating a sunflower, but the difference is only in the color of the foam. For hydrangea, pale blue material is taken, and for sunflower - white, which is then tinted in several shades of yellow. We will give one master class on making a sunflower, and make a hydrangea under the same conditions.

You will need:

• white sheet of foam;
• cardboard or thick paper;
• paints;
• floral green tape.

Preparation method:

1. Draw rectangles on the cardboard in 4 different sizes, cut out the petals.
2. To create a stem, wrap a long toothpick with tape.
3. Circle the petals of each size 12 times on white foam with an awl, cut out.
4. Paint over with yellow of a different shade (darker from the edge).
5. Draw and cut out 4 leaves, paint over with green paint.
6. Cut 1 meter strip, 2 cm wide.
7. Paint it black, turning the edge into a fringe.
8. Twist the black strip into a roll based on the stem, and glue the end - this is the middle of the sunflower.
9. Heat the yellow petals with an iron and twist, and then paste over the black roll, first small, then large.
10. Also form the leaves by attaching them to the underside of the bud.

Master class hairpins and headbands from foamiran

Foamiran is an ideal material for making artificial flowers. They can be used for interior decoration, wedding floristry, creating unique accessories for women. This article will teach you how to make flowers from foamiran with your own hands.

open foma

In order to create any flower from foma, you will need:

• Foamiran of various shades;
• Scissors, both regular and curly;
• Glue (hot glue, moment or second glue);
• Iron;
• Wire or wooden toothpick;
• Foil;
• Any paint for tinting products (acrylic, oil, pastel);
• Tool for applying paint (brush, sponge);
• Molds (to create a realistic flower texture);
• Accessories (beads, rhinestones, stamens).

The photo shows all the materials needed to work with foamiran:

These tools and materials can be easily purchased at almost any craft store.

To create more complex flowers, such as ranunculus, peony and orchid, in addition to materials, you will need patterns. A pattern is a schematic representation of parts of a future product, made of paper, cardboard and other materials. To create realistic products, needlewomen take real flowers and circle them on cardboard or paper, thus obtaining a unique pattern. It looks like this:

Each needlewoman will have such a scheme, because any flower that nature has created is unique. If there is no time to do botany, the easiest way is to resort to the experience of other needlewomen and use ready-made patterns to create your own product. Even if you use the same patterns all the time in creating a particular flower, it will still be unique. Because when processing foamiran, it is impossible to give all products the same shape, these are the features of this wonderful material. To use ready-made patterns in your work, you just need to transfer them to thick paper or cardboard and cut them out. It is very convenient to store cardboard blanks in signed envelopes. To transfer the pattern to foamiran, simply circle the patterns with a toothpick. Next, cut out the details, and you can start working.

Below are a few schemes for creating different colors:

Simple Options

After selecting the scheme and preparing the material, you can proceed directly to work. Making flowers from foma consists of the following steps:

• Transferring the pattern to foamiran;
• Cutting details;
• Toning parts of the flower with various types of paint;
• Processing parts with an iron and hands, as well as molds;
• Direct assembly of the product.

It is worth starting work with simpler flowers, such as dandelion, aster, crocus. To create them, you do not need certain skills, it is enough to have the necessary material at hand.

How to make simple flowers from foamiran, you can see in the selection of video tutorials below:

We make marin root

Let us consider in more detail the described work with foamiran using the example of creating a terry peony flower.

Tools and materials for work: light pink and green foamiran, glue, scissors, dry pastel, toothpick, hair straightener.

Pattern:

Transfer the pattern to cardboard, then with a toothpick to foamiran. The easiest way to do this is to cut the fom into strips of the required height. Tint the petals of the first and second row on both sides with dry pastel (using a sponge or a damp cloth) as shown in the photo:

The petals of the third and fourth rows must be tinted by 2/3:

For the petals of the fifth row, tinting is needed only 1/3. We make the core more saturated:

We circle the green leaves according to the template and draw the veins with a toothpick:

After the tinting stage, it is necessary to cut out all the details:

In this MK, foamiran is processed with a hair straightener. Heat the petals until their edges begin to curl inward. Fold the petal in a spiral, unfold, and then carefully, so as not to tear the material, make a boat-shaped recess in the middle. Repeat this operation with all the petals:

The leaves also need to be heated on an iron and twisted between your fingers, so they will take on a more natural look.