How to wash shellac at home. How to remove gel polish without foil: step by step instructions, tips and photos. How to shoot with a special device - sawing

Shellac nail coating, due to its unique properties, has gained immense popularity among lovers of persistent and beautiful manicure. A beautiful glossy sheen, deep rich color and amazing strength are the main advantages of shellac, which are very much appreciated by fashionistas all over the world.

However, even the most persistent and outwardly attractive manicure at some point loses its appearance. Therefore, it is very important for fans of this remedy to know whether it is possible to remove shellac at home and which method is the most effective and gentle.

Navigation:

The use of special means

One of the most reliable and safest ways to remove shellac is to use professional tools - a special liquid, as well as clothespins, clips or disposable wrappers. Using reusable clips is a very convenient option for effectively removing shellac without foil.

To carry out this procedure, you will need a remover, clothespins or disposable wraps, nourishing oil, cotton pads, and an orange tree stick.

Removing gel polish at home using these products is absolutely easy. This requires:

wash hands thoroughly with soap;
soak cotton pads with a special liquid;
attach them to the nails and secure to the fingertips with clips or disposable wraps;
ten minutes later, the clamps must be removed;
lightly massage the nail plates with cotton pads - as a result of this, the shellac layer should easily come off;
if shellac remains on the surface of the nails in some places, it can be carefully cut off with a buff file;
since the shellac remover has a very aggressive effect on the condition of the nails and skin of the fingers, drying them out, it is necessary to gently rub the nourishing and moisturizing oil.

Many are interested in whether it is possible to remove shellac with a nail polisher. This method has the right to exist, but it cannot be abused, as it leads to significant thinning and weakening of the nail. After using this machine nail plate need to provide intensive nutrition and care.

Use regular liquid

You can remove shellac at home at no extra cost using regular nail polish remover and foil. However, keep in mind that liquid without acetone will be absolutely powerless here.

To remove shellac using improvised means at home, you will need:

divide the foil into strips of the same size in advance;
wash hands thoroughly with soap;
cotton pads cut each into two equal parts;
moisten half of a cotton pad with liquid and apply it to the nail plate;
tightly wrap the tip of the nail with a strip of foil;
do this procedure with all nails;
after fifteen to twenty minutes, remove the cotton pads along with the shellac layer;
remove the remaining coating with a polishing file or a soft orange stick;
on the nail plates and the skin area around the nails, apply oil that has a nourishing and regenerating effect.

The question of whether it is possible to remove shellac with ordinary liquid is of interest to those girls who do not want to spend money on acquiring expensive funds. Indeed, at home, you can use ordinary nail polish remover, but keep in mind that the desired effect will be achieved only if acetone is present in the composition of the liquid.

Other methods and means

A very relevant question is whether it is possible to remove shellac with a liquid without acetone. This tool is effective for removing ordinary varnish, but it is not able to cope with silk, so you should refrain from using it.

However, there are several tools and methods available that can effectively remove the shellac coating.

Many people are interested in whether it is possible to remove shellac with acetone or a solvent intended for domestic use. Such substances are overly aggressive with respect to the nail plates and the surface of the skin, so it is highly undesirable to use a solvent or technical acetone.

A more gentle substance compared to a solvent is isopropyl alcohol, which is widely used in medicine and is often included in personal care products. To remove shellac with this alcohol, you will also need cotton pads and pieces of foil. However, you can do without foil - it will be effectively replaced by a food film that does not allow air to pass through.

Isopropyl alcohol should be used by analogy with other means - a professional remover or ordinary nail polish remover.

soak cotton pads with alcohol;
attach them to the nail plates;
fix tightly with foil;
after fifteen to twenty minutes, remove the cotton pads;
rub nourishing oil into the surface of the nails.

Express Method

There is another method for removing shellac at home. To do this, fill a bath or other suitable container with nail polish remover or isopropyl alcohol. Immerse your fingertips in this bath for fifteen to twenty minutes. Keep in mind that liquid without acetone will not do the job.

To enhance the effect, it is advisable to pre-wrap each nail tightly with a cotton pad. After carrying out this procedure, do not forget to wash your hands thoroughly and rub the nourishing oil into the nail plates. There are many ways to remove shellac at home. However, many of them act aggressively towards nails and skin. So be sure to take proper care of it.

gel polish continues to be one of the most popular decorative means manicure due to the increased resistance of the coating to mechanical damage and flawless appearance throughout the duration of wear. And the nail design, made in shades suitable for your wardrobe from a rich shellac palette, will last in its original form for at least several weeks without additional correction. But even the most impeccable nail design gets boring over time and you want to remove the gel polish as soon as possible. in a safe way. From this material you will learn how you can remove shellac yourself at home, so that your nails rest and "breathe" after a long "imprisonment" under several layers of coating.

One of the main advantages of shellac is that to remove the coating it is not necessary to file the nails at all and thereby expose the natural plates to mechanical damage, causing them to break, thin and delamination. You can buy a special shellac removal kit, which contains a special liquid that quickly softens the hard coating on the nails. But if you don’t have such a liquid at hand, then it’s quite possible to use other means for this procedure that you probably have at home on a manicure table. You can even remove shellac from nails with nail polish remover, and you can do without pieces of foil to fix a cotton pad with solvent.

♦ HOW TO REMOVE SHELLAC WITH A SPECIAL LIQUID

It is advisable to remove hardened gel polish from nails with a professional tool to prevent delamination and thinning of the nail plates. The following brands have proven themselves well: Masura Liquid, CND Nourishing Remover, Nano Professional Remover, Solomeya Nail Remover Artificial, Nila Uni-Cleaner, Severina.

Shellac remover;

Buff for polishing nails;

Thin foil (cut into square pieces);

Cotton pads (each disk is cut into four parts);

Step-by-step instruction:

❶ We treat fingers with an antiseptic and put a piece of cotton pad soaked in a special liquid on each nail;

❷ To tightly press the cotton pad to the nail, twist a piece of foil around each nail plate and fix the workpiece with an “envelope”;

❸ After 10-15 minutes, remove all the foil "envelopes" from the fingers and carefully clean the softened coating from the nail plates with a pusher or an orange stick;

❹ A thin film of shellac may remain on the surface of the nail plates, which we remove by light grinding with a nail file (literally run over each nail several times), and then treat the nails with a polishing buff;

❺ After polishing the nail plates, apply a special emollient oil to the cuticle with a brush, and then rub it into the keratinized skin;

❻ If the nails look weakened and thinned, take a strengthening bath with sea salt a few hours after the procedure, apply a mask with red pepper on the nail plates.

♦ HOW TO REMOVE SHELLLAC WITHOUT USING FOIL

It is quite possible to perform this procedure at home without foil and cotton pads, replacing these materials with conventional adhesive tape.

Tools and materials for the procedure:

Gel polish remover (or nail polish remover with acetone);

· Orange sticks or a metal pusher with a rounded spatula;

· Glass or ceramic nail file with fine abrasive;

Buff for polishing nails;

Adhesive plaster, cut into 10 large pieces;

Wide bowl

Vaseline or oily cream.

Emollient cuticle oil.

Step-by-step instruction:

❶ With a nail file with a fine abrasive, lightly grind the surface of the coating, removing the top layer of the top;

❷ Pour softening liquid into a bowl so that you can immerse your fingertips in it;

❸ Apply on the periungual skin thick layer vaseline or fat cream;

❹ We wrap the upper phalanx of each finger with adhesive plaster and immerse the fingertips in a bowl of liquid;

❺ After 15 minutes, remove the adhesive plaster from the fingers and carefully remove the softened coating with an orange stick or a pusher, moving from the cuticle to the tip of the free edge;

❻ We polish the surface of the nail plates with a buff and rub softening oil into the cuticle;

❼ After a few hours, make a bath with warm water in which you can dissolve 4 drops of iodine and 2 teaspoons of sea salt to strengthen nails.

♦ HOW TO REMOVE SHELLAC WITHOUT SPECIAL LIQUID

For the procedure, you can use acetone, which is one of the strongest solvents. But it is categorically contraindicated to use this remedy for owners of very thin, brittle and exfoliating nails. It is advisable to remove shellac without a special liquid only in emergency cases, when it is urgent to get rid of decorative manicure and have only acetone on hand.

Tools and materials for the procedure:

Acetone solution (concentration not more than 60%);

· Orange sticks;

nail file with fine abrasive;

Vaseline or oily cream;

· Cuticle oil;

· Moisturizing cream;

· Wide bowl.

Step-by-step instruction:

❶ Acetone solution (60%) should preferably be warmed up a little. We fill the pan with hot water (about 1/4 volume) and place a bowl of acetone solution there (so that you can dip your fingertips into it). It is enough to hold the bowl in the pan for 3-4 minutes;

❷ Remove the top layer of shellac with a nail file, and then remove the dust with a manicure brush;

❸ To protect the periungual skin from exposure to a strong solvent, apply a thick layer of oily cream on the upper phalanx of each finger, without going over the nail plates;

❹ Immerse the fingertips in a bowl of solvent so that the liquid completely covers the nails;

❺ Keep your fingertips in the bowl for about 10 minutes. After this time, the coating will noticeably swell and begin to slightly move away;

❻ Then remove the fingers from the bowl and use an orange stick to remove the softened coating from each nail;

❼ After the procedure, wash your hands thoroughly with soap and water, dry with a towel and apply a moisturizer to your skin. After a few hours, it is advisable to make a strengthening bath for nails.

♦ HOW TO REMOVE SHELLAC WITH POLISH REMOVER

For the procedure, a regular nail polish remover with acetone in the composition is suitable. We also need foil squares, cotton pads and orange sticks;

❶ Fold a cotton pad in half and soak with liquid, and then apply to the shellac coated nail;

❷ Pressing the cotton pad tightly, wrap a piece of foil around the fingertip, which will securely fix the cotton wool and prevent the solvent from evaporating;

❸ After 15 minutes, remove the foil from each finger and remove the shellac from the nails with an orange stick;

❹ Massage the skin around the nails and apply a special cuticle oil on it.

♦ HOW TO REMOVE SHELLAC WITH THE HELP OF SPECIAL NAPKINS

Very convenient disposable wipes impregnated in the form of cases. The napkin is opened in the incision area, the film is torn off and the case is put on the fingertip. The napkin is hermetically attached to the finger and within 10 minutes the gel polish is completely softened.

- Click on the photo and expand the annotation

♦ VIDEO TUTORIALS FOR BEGINNERS

Every woman wants to look attractive and well-groomed every day. Beautiful hands is one of the main components of success. And thanks to new technologies in the field of shellac nail service, beautiful manicure today even washing the dishes or the floor, washing or cleaning will not be able to interfere.

The bright and durable shellac coating will withstand any load and will require removal, renewal no earlier than in two weeks.

Applying gel polish at home is not an easy task. In order for the Shellac coating to hold well and look decent, masters study for a single month. But removing shellac on your own is not so difficult. Moreover, this will allow you to save a large amount every month, as well as quickly update your manicure without leaving your home.

What is shellac

Shellac is essentially a cross between nail extensions, bio-gel and ordinary varnish. He absorbed all the best from these coatings and now in our arsenal there is a universal Shellac remedy that meets all the requirements of a modern woman.

Here are the main benefits of Shellac:

The coating lasts from two weeks to one month;
Shellac looks as natural as possible;
Shellac gel polish retains its color and shine throughout the entire period of wear;
Strengthens natural nails and does not allow them to exfoliate and break;
Makes it easy to grow long nails;
Under shellac, nails can breathe (compared to using acrylic or gel);
Does not require a strong "washed down" of the upper layer of the nail, therefore, does not spoil it.

What you need to know

Any salon nail artist will tell you that it is impossible to remove shellac at home. This craftiness is justified, because removing the Shellac coating at home, you will not bring income to the salon. And the master is worried about his future work. He understands that if you remove the varnish incorrectly and damage your nails, you will have to try hard to ensure that the next coat of shellac holds well.

What you need to be prepared for when deciding on such a procedure at home:

It will take about one hour of free time to remove shellac on your own.
It is necessary to purchase in a professional store the means that will be needed during the procedure. You will spend from 400 to 1000 rubles on this, but these costs will quickly pay off - the set will last for about a year of use.
Cosmetics for removing Shellac gel polish are chemistry. They can cause an allergic reaction, brittle nails and dry skin, and even burns if used improperly.
Get ready to ventilate the room. Means can smell quite strongly. Try not to have a session in the bathroom or bedroom.

Precautionary measures

Before starting the procedure, wash your hands thoroughly with soap and water, treat with an antiseptic and dry well. This will protect you from infection in case of injury to the nail plate or cuticle.
If you are using toxic substances (especially acetone or alcohol), open a window.
Do not apply metal objects to remove shellac. They may react chemically with a remover or other agent. Use orange sticks, wooden or plastic nail spatulas.
During the removal of the shellac coating and immediately after the procedure, the nail plate becomes very soft. Do not press on it and do not pick, so as not to damage it.
Never use commercial grade acetone. After such a procedure, you will struggle with burrs for a very long time. And it will be simply impossible to grow nails until the plate is completely renewed.

Required Funds

In a specialized store, of course, you will be assembled a complete kit for removing shellac at home.

But it’s better to go through the list so as not to get too much:

Foil. Any will do, but it is more convenient to use a special hairdresser. First, it's not that wide. Secondly, denser. You can also use special clothespins-clips;
Cotton pads;
Remover - gel polish remover. You can also purchase a cheaper nail polish remover with acetone;
Manicure file for cutting off the shiny layer of the Shellac coating;
Manicure orange stick or plastic pusher;
Bafik - a rectangular file for grinding a natural nail;
Cuticle oil or cream.

Options and methods of withdrawal

There are several ways to remove old shellac coating from nails.

Let's consider everything in order:

As in the salon. If you have purchased all the necessary items for the procedure, congratulations, the removal of Shellac gel polish will be no different from the salon.
With a special kit. Now they sell disposable kits, which consist of napkins moistened with a special agent in envelopes that must be put on each nail. After 10-15 minutes, remove the bags and shift the softened shellac coating.
No remuver. In fact, the procedure differs from the salon only in the presence of an unpleasant odor and additional harmful effects on the skin and nail plates.
No foil. If you run out of foil at the most inopportune moment, you can replace it with cling film. This, of course, is not so convenient, but it is also effective.
Extreme. When there is nothing at hand except for nail polish remover with acetone and a greasy cream, you can make a chemical bath for nails.

Step-by-step instruction

Before you start getting rid of the old shellac coating, carefully study the chosen method, but rather put the instructions in front of your eyes. Prepare everything you need and wash your hands thoroughly.

Shellac Remover

Removing shellac with a remover is the safest and easiest. Such a tool is specially created not only for removing the coating, but also for additional nail care. It moisturizes and nourishes the nail plate without drying the skin around the nail.

Cut the foil into 10 pieces, about 7 by 5 centimeters in size.
Divide the cotton pad in half (in the middle), and then into 10 pieces, approximately equal to the area of \u200b\u200bthe nails.
With light movements of the file, remove the top shiny layer of the shellac coating. Be careful not to damage the cuticle and do not file too hard.
Soak a cotton pad with Remover and place on the first nail.
From above, “wrap” the nail and fingertip with foil, shiny side to the nail.
Repeat the procedure with the next four nails on one hand.
Wait 10-15 minutes (the time depends on the chosen product and the manufacturer of the applied shellac).
Remove foil and cotton wool from one nail. The shellac coating should “crack” and move away from the nail in several places. If this does not happen, hold the product for a few more minutes.
Release your fingers one at a time, removing the coating from each shellac with a stick. Do not press on the nail plate and do not make rough movements.
Buff buff each nail.
Apply cuticle oil.

Try to use only this method of removing shellac at home. It is he who is recommended by all manufacturers of Shellac gel polishes, as it allows you to keep your nails healthy and beautiful.

With foil

The same procedure can be carried out in the presence of foil and the absence of a special tool - a remover. We simply replace it with a liquid containing acetone or isopropyl alcohol.

Without foil and acetone

It happens that you need to get rid of the shellac coating immediately, and there is no foil or acetone in the house. Of course, you can simply “cut down” the Shellac coating with a file. But this is a very harmful procedure and it will not be easy to restore nails after it.

Perhaps you have a bottle of household isopropyl alcohol lying around? Then let's start the process:

We take ordinary plastic bags or cling film;
We moisten the chopped cotton pads well in alcohol and apply to the nail;
Wrap a film or bag on top and wait 15 minutes;
Then everything is as usual: remove the shellac coating with chopsticks, polish, apply nail oil.

Extreme

Before removing Shellac nails in this way, carefully weigh the pros and cons. This is very traumatic, harmful and dangerous advice:

Prepare a bath with acetone;
Spread the skin around the nail and fingers with any fat cream;
Dip your fingertips in acetone and wait 15 minutes.

Attention, if you feel a burning sensation or tingling, remove your hands immediately and wash them with soap and water. This means that this method is absolutely not suitable for you.

Remove the shellac coating with a plastic spatula or wooden stick;
Wash your hands thoroughly with soap and dry;
Polish the nail plate and treat your hands with cream.

If you remove gel polish yourself, do it alternately: first on one hand, then on the other. It may not be as fast, but definitely better and more convenient;
Do not use regular cotton. A cotton pad torn in the middle into two parts will allow you to spend much less money and prevent it from spreading onto the skin around the nail;
It is good if at least 24 hours pass before the next application of shellac. At this time, moisturize your nails more, apply creams and oils;
After the procedure, be sure to pay attention to your nails. Take a bath with sea salt and next time the shellac coating will be worn a little longer.

After removing the shellac coating in beauty salons, I often offer a number of restorative procedures. There is nothing complicated in them and you can easily carry them out at home:

Strengthening the nail plate with the help of special therapeutic varnishes, creams and baths;
Moisturizing and nourishing with various oils;
Whitening. At home, this procedure can be carried out using an ordinary lemon. To do this, you need to cut it in half and immerse it in halves one finger at a time for 1-3 minutes.

Where to buy, how much are the funds

You can buy all the necessary funds in specialized stores or on the Internet.
Here are some addresses of reliable suppliers:

frenchnails.ru;
krasotkapro.ru;
solinberg.ru.

The price for a professional Remover starts from 900 rubles. Severina shellac remover can be bought for about 100-150 rubles. Ready-made napkins in a set will cost you up to 100 rubles for one set. But if you buy a set of a hundred pieces, it will turn out much more profitable.

The popularity of shellac - a very durable and extremely beautiful nail coating - is growing every year. This is due to the fact that the advantages of gel polish compared to similar cosmetics obvious. Shellac lasts for a long time, looks great, does not crack even after daily household chores - washing, cleaning, etc. However, to get rid of this ultra-durable coating, it is not enough just to walk on the nails with a special liquid - you need to contact a beauty salon or carefully study the technology for the correct removal of gel polish before the procedure.

In fact, removing shellac from nails is not difficult at all. Both in the salon and at home, this procedure does not require too much a large number time and some super professional tools. The main advantage of self-removal of gel polish is a significant savings in money. On the other side, experienced master, as a rule, uses the most gentle products, so the nails and the skin around them will suffer less and will look better than after home experiments. In addition, if shellac is removed for the first time, then you will have to turn to a professional in any case.

How is gel polish removed in the salon?

The salon procedure differs slightly from the home one. However, it is these seemingly insignificant details that determine the subsequent health of the nails and their presentable appearance.

Stage 1
Directly in the salon before starting the procedure, you need to thoroughly wash your hands with soap and dry them with a paper or regular towel.
Stage 2
The master begins to impregnate special sponges with a special liquid for removing shellac and alternately attach them to the nails. The design of the sponges will allow them to be wrapped around the fingers, like small bags, allowing the product to locally act on the coating and increasing the effectiveness of the procedure. As a result, the liquid does not evaporate, does not spread over the entire finger, but is absorbed into the shellac and gradually dissolves it.
Stage 3
After 10-15 minutes, the sponges are removed along with the shellac. If pieces of gel polish remain on the nails, the master gently pry their edges with an orange stick and remove the remnants.
Stage 4
If necessary, the nails are polished (usually after a salon procedure this is not necessary) and a decision is made about their “rest” or applying a new coating. The nail plates will not suffer at all if they are immediately covered with a new manicure, but experts recommend doing 1-2 week “vacations” for the nails, covering them with moisturizing and strengthening varnish for a quick
recovery.

Shellac removers

Theoretically, shellac can also be removed with an ordinary acetone-containing “wash” for nails. But in practice, this liquid does not have a very positive effect on the nails, cuticles and the skin surrounding them, therefore, if possible, it is better to use one of the tools specially designed for this.

Severina

One of the most popular gel polish removers. It can also be used to remove other coatings, such as biogel and gel. The high efficiency of the product and the relatively low cost make it extremely popular both here and abroad. You can use "Severina" on
natural and artificial nails. In this case, the time required to dissolve shellac is no more than 12 minutes.

Nano Professional and Nourishing Remover

The cost of these professional shellac removers is quite high. However, they remove the coating not only very quickly (5-7 minutes), but also as carefully as possible.

Bluesky

An effective remedy for salon procedures. Works great with CND brand coatings. It is characterized by an average speed of shellac dissolution (12-15 minutes) and a medium-aggressive effect on nails and skin.

Solomeya

Cheap tool. It works great with gel polish, but the action time is about 20 minutes. Accordingly, the nails and the skin around them are negatively affected longer. Not suitable for thin and sensitive nails, as well as for skin prone to allergic reactions.

There are other professional solutions for removing shellac: Erase Remover Red Carpet, Cuccio Veneer, Runail, Expert Touch Remover OPI, Artifical Nail Remover In’Garden, Masura, Remover Gel FX Orly, Product Remover CND, Soak-Off Remover Jessica. All of them quickly dissolve the coating, without causing noticeable harm to the nails and skin of the hands. It is best to choose a product of the same brand as the gel polish itself.

Common solvents

To save money at home, you can remove shellac with common solvents. But there is one caveat - they must be designed specifically for nail care. Therefore, technical acetone will not work in this case, but cosmetic acetone will do an excellent job with gel polish, although not as quickly and accurately as professional tools. Acetone-containing “washes” dissolve the coating in 20-30 minutes, so you should not abuse them. From time to time, if there was nothing more “soft” at hand, you can also use products with acetone. But you can’t constantly remove shellac with them.

Is it possible to remove shellac at home?

With a catastrophic lack of time or money, gel polish can be removed from nails and at home. In principle, the procedure itself is a bit like the process of removing extensions. acrylic nails, therefore, if you already had to do this, then no difficulties should arise. The only difference is that nails (of course, if they are “native” and not artificial) will not have to be cut.

The specifics of the shellac removal procedure

In order for the nails to remain healthy and beautiful after the home procedure, you must remember the following rules:

compulsory hand washing. Before removing shellac, the nail plates and skin of the hands must be degreased and pathogenic microorganisms removed. Therefore, it is better to use antiseptic soap, but, in extreme cases, the usual will do;
prohibition of mechanical removal of the coating. Do not cut, chip or completely cut off the coating - this can lead to serious injuries to the nails;
rejection of metal accessories for manicure. Nails are easily damaged by iron tools, especially in the process of removing shellac, so in this case it is better to do without them;
antibacterial treatment of nail plates and fingers after the procedure. Ensures nail health and removes gel polish remover residue. You can use regular chlorhexidine or professional manicure suspension.

What is required to remove gel polish?

A set of improvised tools for self-removal of shellac must necessarily include a wooden (preferably orange) stick, a solvent or a special coating remover, disposable sponge wraps (or foil and cotton pads), a nail file. Also - as an alternative - you may need:

Food film. It is an excellent substitute for aluminum foil. It is very convenient to wrap your fingertips with cling film, it is completely sealed and its cost is low (thus, you can remove shellac at home not only without special sponges, but also without foil).
Plaster and thin plastic bag. Can be used instead of foil or cling film regular package, cut into small pieces, and a plaster that will fix this package on the fingers.
Plastic clips. Special clips for removing gel polish can greatly simplify the procedure by securely fixing cotton pads or sponges on your fingers.

How to remove shellac: step by step instructions

Helpful advice: If non-professional solutions are used during the procedure, then the duration of their exposure to the coating should be increased to 30 minutes. Special funds kept on the nails according to the instructions. In addition, to speed up the process, the surface of the varnish can be washed down quite a bit: in this case, the liquid will quickly penetrate the hardened shellac, helping it to separate from the nails.

First step
We divide the foil (bag, cling film) into small pieces and take out special sponges from the package. If instead of sponges there are cotton pads, then they must be cut into two equal parts.
Second step
Wash your hands thoroughly and dry them. Then we moisten sponges or halves of cotton pads well in shellac remover, put them on the nail and wrap them tightly with foil (food wrap, bag). The cotton wool / sponge should fit very tightly to the nail, because this way the coating dissolves faster and better.
Third step
We withstand the liquid for the required amount of time (5-30 minutes). It is better to keep a little longer than necessary (unless it is acetone, of course).
Fourth step
We unwind our fingers and carefully remove the cotton pads / sponges. Ideally, gel polish should come off completely with them. The remaining pieces are carefully and gently, so as not to damage the nail plate, “scrape off” with an orange stick.
Fifth step
If the surface of the nails is uneven, then it makes sense to lightly walk along it with a grinding nail file.
sixth step
We treat the nail plates with any antibacterial agent and lubricate with aevit, cuticle oil or cream that strengthens the nails.

Procedure completed! Now you can decorate your nails again with an intricate design or take a short break, which will undoubtedly benefit them!

Lyubov Ivanova

Reading time: 5 minutes

A A

How to remove shellac from nails, what methods of removing shellac coating exist, and whether it can be removed at home, you will learn from the article.

Every girl is familiar with such a novelty of manicure as a shellac coating. Shellac is an innovative nail polish that has the properties of a gel. A durable nail coating developed by an American company is popular all over the world. Compared to regular nail polish, shellac lasts longer on nails, averaging about three weeks.

Distinctive features shellac coatings are that the application occurs without cutting off the top layer of the nail. At the same time, a special technology is observed using an ultraviolet lamp and professional tools (base and top).

Shellac gives the master incredible scope for design. Drawings, sequins, rhinestones and other decorative elements, the effect of broken glass, a classic or colored jacket - all this can decorate shellac-coated nails. The procedure is more in demand than a manicure with ordinary varnish and extensions. Unlike extensions, shellac is a more gentle option, it damages the nail plate less, and is not inferior in effectiveness.

The main advantage of shellac manicure is durability. It is also associated with the features of removal. Regular nail polish remover won't work. Manicurists strongly recommend seeking help from a beauty salon, but sometimes this is not possible. For example, a manicure was damaged during a vacation or a nail master cannot accept it in the near future. Then there is a need to remove shellac yourself at home. This is real if you know the features and follow the rules for removing shellac.

Methods for removing shellac without a special liquid

To remove shellac without resorting to the help of a specialist, you will need the following tools: acetone or acetone-containing nail polish remover, isopropyl alcohol, aluminum foil, cotton pads or cotton swabs, and an orange stick are also suitable. Technical acetone should not be used. It injures the skin, cuticles and even the nail plate.

Consider two simple but effective ways removing shellac without a special liquid.

Option number 1

Before the procedure, make sure that the product does not cause allergies. To do this, apply a small amount on the inner surface of the elbow. If after ten minutes there is no redness or irritation, carry out the procedure.

Prepare the components necessary for the procedure. Split cotton pads and cut into two halves - semicircles. If ordinary cotton wool is used, small cotton pads are formed. 10 squares are cut out of foil so that everyone can wrap a finger. Wash your hands in warm water with soap, this will degrease the skin and allow for a more effective procedure.

Moisten the cotton with plenty of nail polish remover. Apply the moistened swab very carefully, avoiding contact with the skin and cuticles to prevent burns.
Wrap the nail with cotton tightly applied with foil. To fix cotton sponges, regular ones are also suitable. rubber bands. Do this with each finger.
The design is left on the nails for 10-15 minutes, after which it is removed alternately from each finger. It is recommended to remove cotton wool with rotational movements, so it will be possible to remove more varnish.
Most of the coating should come off the nail immediately after removing the foil, the remains are removed with an orange stick.

An orange tree stick can be replaced with a pusher - this is a metal spatula for pushing back the cuticle. The pusher will need to work more carefully, gently press on the tool, since the metal can damage the nail plate when pressed hard. If the shellac does not lag behind the nail plate, the procedure is repeated for several minutes.

The shellac removal procedure is completed by polishing with a buff (this is a polishing block that is softer than a file, helps to smooth out uneven nails, and bring the manicure to perfection). They remove the smallest remnants of the coating, and the shape of the nail is honed. A polishing file will also work. To prevent dryness and thinning of the nails, cuticle oil is applied with light massage movements.

Video instructions

Option number 2

The second method is easier and faster than the first, but has disadvantages. It is less gentle, and aggressively affects the nails and skin of the hands.

Before the procedure, wash your hands with warm soapy water. The upper shiny layer of shellac is sawn off with a grinding file.
The skin around the nails is smeared with a greasy cream. For 10 minutes, immerse the nails in a bath with acetone or concentrated nail polish remover. You can immerse one at a time, if the size of the container allows, soften the coating on both hands at once.
Carefully remove the film of varnish with an orange stick, try not to damage the nail plate. Wash your hands thoroughly in warm water using mild soap.
As in the first option, we treat the nails with a buff and lubricate the cuticle with special oil.

After the transferred stress nails and hands need recovery. To do this, grease them well nourishing cream. To make the skin of the hands recover faster, become tender and soft, make a special mask that will moisturize the skin of the hands and nourish it with useful substances.

The listed ways to remove shellac at home will help save money and not resort to a visit to a nail salon.

Professional methods for removing shellac

It is easier to remove the shellac coating than the gel that is used for extensions. To make the process go quickly and without negative consequences for nails, it is worth contacting specialists in salons. In nail salons, specialized tools are used that will allow:

Completely remove the gel polish from the nail plate without leaving even the thinnest film. The thin transparent layer of coating remaining on the nails will spoil the future manicure, deprive it of both aesthetics and strength.
Prepare the base for the next manicure, which will allow you to look perfect.
Strengthen nails with nourishing and moisturizing ingredients.

To simplify the task of removing shellac, professional kits are used. They are suitable for both salon and home use.

The standard set contains a shellac dissolver, an orange stick, disposable nail sachets, a professional nail file and cuticle oil.

In specialized salons, only professional products are used and the technology for removing shellac coating is as follows:

Shellac remover is applied to cotton sponges that look like ordinary fingertips. They are put on each finger and fixed with Velcro. Thus, the liquid gradually corrodes the coating without affecting the skin.
After 10 minutes of exposure, the sponges are removed, and the remnants of the softened gel are removed with an orange stick.

Video tips

Professional masters use high-quality products in their work, which during the procedure saturate the nails with caring components. Immediately after this, you can apply a new coating, this will not damage the nails.

Types of liquid for removing shellac

The choice of liquid for removing shellac should be taken very seriously. A durable coating is difficult to remove, so some liquids act aggressively not only on the varnish, but also on the nail plate.

Any shellac remover contains acetone or its analogues, for example, acetylate, solvent. These chemical compounds break down gel polish well, but side effect use favors the dryness of the nail plate. Another component often included in many liquids, isopropyl alcohol also adversely affects the nail.

To neutralize or reduce the negative effects of chemical elements on the nail famous brands supplement the composition of liquids with vitamins A and E, petroleum jelly, glycerin, disinfectant additives, plant extracts and essential oils.

Useful for nails are castor, lemon, almond oils, tea tree extract, decoction of wheat germ. Some manufacturers produce such a nutrient liquid with the name “smart enamel”, because it provides safe comprehensive care and promotes a healthy appearance.

If the product does not contain nutrients, it is imperative to use cuticle oil after each shellac removal procedure. This will prevent overdrying of the cuticle and nail plate. It is strongly not recommended to remove the coating with concentrated acetone. It aggressively affects the nail plate, provokes delamination of the nail and, penetrating the body through the skin, poisons with toxins. In order not to harm your health, use a quality shellac remover.

Consider the most popular liquids.

Liquid firm CND (Shellac) gently removes varnish in an extremely short period of time - 8 minutes (standard 10-15 minutes). The vitamin E and macadamia nut oil included in the composition moisturizes, preventing overdrying of the nail plate and cuticle and the appearance of white spots on the nails. Some brand fluids have nice smell(CND Product Remover).
Manufacturer color Couture entity One releases goods in containers with a very convenient dispenser. The protective layer of the nail plate creates lanolin, which prevents dryness and irritation.
Company fluids Gelish Harmony, Jessica Gelation,GelFx Orly dissolve the varnish in 10 minutes without harming the natural nail plate.
Firm Astonising produces liquids that are suitable for removing not only shellac, but also gel polish and acrylic.
More versatile brand tools
If it is not possible to go to a nail salon to remove shellac, be patient and available means and follow the procedure at home. The main thing is to follow the rules for removing shellac, which we described in the article.