Corrugated flowers scheme. And this is the easiest way to create a rose. Delicate corrugated rosehip

Do-it-yourself crepe paper flowers are not so difficult to make. This is a great way out of the situation when you need to congratulate on any holiday. loved one, but I want to do it in an unconventional way. Flowers are always relevant - on March 8, and on birthdays, and on Valentine's Day. But on the eve of such celebrations, not everyone can afford to buy fresh flowers, since their prices are increased by 2-3 times. Creative people know a simple and economical way out of the situation, let's try to create flowers from corrugated paper with our own hands.

Today we suggest that you familiarize yourself with several instructions for making various flowers, from which everyone can choose the most suitable master class or use several to create a whole flower arrangement.

Let's start simple

• corrugated paper in a skein (it can be of different colors, but one of them is always green - for stems);
• PVA glue;
• scissors.

We take a skein of corrugated paper of the color that the flower will be. We wind off a small piece and cut it off. Then you should twist the ribbon from one edge and squeeze it with your fingers. According to this technology, a flower bud should be wound, but squeezing only at the bottom, and leave the upper edges free. The underside of the craft should end up looking like a thin stick. When you get a lush flower made of corrugated paper, you need a piece of this color, folded in half, wrap the bottom edge and fix it with glue.

Now it follows from green corrugated paper to make a stem. To do this, we also cut off a piece of tape (up to 10 cm) and, starting from the base of the flower, twist it, only not making volume, but lengthening the workpiece. The result should be such a full-fledged flower.

The resulting corrugated buds will resemble: pink - sakura or apricot flowers, and if you use red material - carnations, yellow - dandelions. Thus, using the master class described above, as a result, you can create a multi-colored composition of flowers.

Making paper roses

Roses are the favorite of most of the fairer sex. Therefore, let's get acquainted with how to make flowers from corrugated paper of this type.

We take a corrugation of scarlet color and cut off 25 cm. The segment should be folded in half along the entire length, stretching a few folds. After that, the fold must be converted into folds by twisting. Having reached the edge, the collar should be bent with your fingers more strongly. Now it remains to form a rosebud from the resulting base, but it is not recommended to make it dense, it is better to give roundness by spreading the petals a little. When the workpiece resembles a real rose, the base must be fixed with a thread. It remains to finish the stem.

A rose can be made using another master class. For this you will need the following:

• corrugated paper (pale pink, green and hot pink);
• green wire;
• scissors;
• glue gun;
• brush or pencil.

First of all, we take on bright pink corrugated paper, which will need a piece of 8x14 cm. This piece must be folded in half, after which we correct the upper edge with scissors, giving it roundness. After that, the edging of the workpiece should be stretched and unfolded - you get the inner rose petal (base). To make the rose more voluminous or original as a result, you can wrap the candy in the base, fixing it with threads. The tip must be cut in the form of a tooth. It is immediately necessary to fix the stem, which is made of wire and inserted into the bud.

Now let's create the rest of the petals. To do this, bright pink corrugated paper needs to be folded into 4 layers and cut out 4 petals at once. After that, using a pencil or brush, the edges of the petals need to be given a natural shape. Then we attach to the base.

We will make the last row of roses from pale pink corrugated paper measuring 10x16 cm. Fold the material again in 4 layers, cut out 4 petals, but with large indentations along the outer edge. Then we shape it with a pencil and fix it step by step around the already more magnificent base.

The elegant and natural base of the flower can be made from green corrugated paper. To do this, you need a small segment, from which you need to cut deep cloves of the stem. From the same material we cut off a small piece, and with the help of a gun we fasten the cloves, wrapping them in an even green segment.

Corrugated paper roses (video)

giant flowers

It would seem that what else can be made from corrugated paper?

In fact, when working with such a versatile material, asking for a floral theme, you can create not only existing types of flowers, but also come up with your own options.

For example, huge blue roses or small sunflowers of an unconventional color.

Large corrugated paper flowers look quite original and beautiful. Even one such craft is suitable for a presentation. So, let's try to alternately make such giant corrugated paper flowers as poppies and peonies.

To make a poppy, you need a whole roll of corrugated paper, which should be cut into 6 equal parts. After that:

1. The parts must be superimposed on each other, folding them with an accordion 10 cm wide.
2. We fix the lower part with threads.
3. Round cuts should be made along the top of the workpiece.
4. Now all the petals need to be unfolded, separated from each other, and then give the flower volume.
5. From black corrugated paper we will make the base. It is necessary to wrap any segments in this material, forming a ball. We fix the base of the ball with tape.
6. We will make the stem from thick wire, wrapping it with green paper. If desired, you can cut and fix the petals.

As planned, we will now consider a master class for creating a huge peony. To do this, it is first recommended to make a sketch (template) of this flower. On the sheet we draw a wavy round shape, similar to a cloud. Further, the master class involves the following actions:

1. Cut out the template along the outline.
2. We apply a template to the corrugated paper, circle it with a pencil and cut out the blank. To make large corrugated paper flowers, you will need at least 10 pieces of such blanks.
3. All blanks must be stacked on top of each other, after which a hole should be made in the middle.
4. Through the resulting hole, you need to pass the wire, bending the end, and then thread it into the adjacent hole. The ends of the wire must be fixed in order to obtain a blank for the stem.
5. Now the topmost workpiece needs to be bent to the center, and then do the same with the remaining sheets. You should get a magnificent bud.
6. It remains to decorate the stem. To do this, carefully wrap the wire with green crepe paper. Finally, fix the tip with glue.

Now that you know how to make flowers from corrugated paper, and different ones, you can please your family and friends with original gifts or decorate your own home with them.

Large corrugated paper flowers (video)

Reviews and comments

(No ratings yet)

Victoria 21.11.2016

Which gorgeous rose you got it. I didn’t even know that such miracles can be done from corrugated paper. My daughter is very fond of fakes, she loves labor lessons at school, so I am constantly looking for something new for her on the Internet. Today we will sculpt such flowers with her, of course we will start with small ones, I hope we will fill our hands and such beautiful roses we can do it too, they are absolutely beautiful.

Hope 11/28/2016

God, what a beauty. Some flowers are alive. I had no idea that paper flowers were relatively easy to make. The most important thing is time and desire. Of course, you will have to tinker with the first one, but the result is worth it. We have a baby's birthday coming up soon. Now I know exactly how to decorate a room besides balloons. It remains only to find a beautiful paper.

I made similar flowers, everything worked out for me. It is done very easily, and most importantly quickly, with the help of such a bouquet you can perfectly decorate the room. A good alternative to store-bought artificial flowers.

Bright beautiful bouquet will become a wonderful gift. Via flower arrangements decorate holiday tables. They are used in the design of various events. Such products can be made by hand. They will not fade over time, they will delight others with their impeccable appearance for a long time.

To create an interesting composition, consider a photo of corrugated paper flowers. Experienced craftswomen offer different variants production and layout of plant elements.

The structure of corrugated paper allows you to create three-dimensional compositions. The material holds its shape well and is suitable for decorating bouquets. It will take quite a bit of time to create your own unique flower.

Materials and tools

To start the creative process, get corrugated paper. It is inexpensive and easy to get in the store. Corrugated material is produced in a wide range of colors.

You can buy plain options or rolls with a soft transition of shades. They open up almost unlimited possibilities for implementation. interesting ideas.

To make flowers, you need the following materials:

• corrugated paper;
• cardboard;
• wire;
• glue;
• cotton wool;
• paperclips;
• threads.

If you plan to make bouquets with sweets, then they purchase sweets in advance, which will become an important component of the product.

To work, you will need the following tools:

• scissors;
• simple pencil;
• pliers;
• silicone gun.

To make beautiful flowers, carefully observe living plants. Each has its own structural features, which is taken into account in the manufacture. To get large flowers from corrugated paper, increase the standard pattern to the desired size.

The technology for performing the work is no different from the usual procedure for making flowers. But for a bouquet of large plants, more materials will be needed. They will be a great decoration of the interior at the celebration.

Corrugated Paper Rose

The Queen of Flowers always looks great in a single copy and in bouquets. This delicate flower easy to do by yourself.

Step-by-step instruction:

• Petals and leaves are drawn on cardboard. For this you can use ready-made patterns or take them off a real rose.
• In the blanks of the petals, small indentations are made with the fingers to give the elements the desired shape.
• The length of the leg is chosen at the request of the craftswoman; for this, the wire is carefully cut with pliers.
• Prepare small pieces of wire of smaller diameter, on which green leaves will be attached.
• The end of the wire is bent with pliers to form a bud. For this, cotton wool is used, or the middle of the flower is simply wrapped in paper.
• Alternately, they begin to glue the petals to the core, starting with the smallest detail. To securely fasten the elements, a strong matching thread is used.
• The flower is ready. Now you need to take a small strip of corrugated paper. It is wound around the stem, on which pre-prepared leaves are attached. This is the final stage of the assembly.
• Petals and leaves are neatly straightened.

If you make several flowers, then they are collected in a bouquet. There is an easier way to make a rose. It only takes 15 minutes for one flower.

A strip 10 cm wide is cut out of paper of great length. The edge of the workpiece is made uneven, pinching with fingers along the entire length. After this operation, the strip is folded into a bud, it is attached to the wire with a thread. You can create an amazing composition in just 1 hour.

Novice craftswomen are concerned about the question of how to make flowers from corrugated paper. This requires preparing materials and tools, be patient and get to work. If you follow the instructions exactly, you can get excellent results.

Corrugated paper peony

For a luxurious peony, you need paper different shades. A strip is cut from each roll. The element size depends on its distance from the core. Dark color located closer to the center, after which there is a transition to lighter shades. The resulting elements are folded like an accordion, they should all have the same width.

The edge of each component is shaped into a petal. The middle parts of the obtained blanks are connected and stacked in size. All components are rewound with a thread, a flower is formed.

Corrugated paper tulips

Take a template and cut out the petals. Each of them twist the tip, give the shape of a cup at the base. Then they begin to form a bud, when performing this operation, glue is used.

Elements are alternately wound to the core. After this operation, a stem is wrapped with a strip of green paper. Cut sheets are attached to the stem.

Corrugated paper flowers with candies

A rectangle is cut out of paper, folded in half, on one side the edges are cut with scissors. Candy is placed in such a blank. The material in the center is slightly stretched by hand. On the one hand, the edge is fixed with an elastic band. A wire is used as a stem, it is attached to the base of the flower. To do this, you can use a silicone gun.

Cut out the petals. They need to be shaped by stretching the middle and twisting the edges of the workpiece. For a lush flower, cut out more petals. They are attached to the bud with threads and glue. This fixation ensures a reliable connection of all components. You can also use rubber bands for this.

Leaves are cut out of green paper and fastened at the base. The stem is wrapped in green paper. A bouquet of flowers will be a great gift for the holiday. Small bows will give the composition a festive look, they are fastened with skewers. Such a surprise is sure to be appreciated.

Finding ready-made stencils is easy, you can make them yourself. Don't worry if the elements are different. In nature, there are no two absolutely identical leaves. To speed up the process of cutting out the details, fold the paper several times.

You can achieve a natural color of the petal if you apply more than dark paint. Using a variety of shades in one flower will give it a natural look.

Patterns are sorted and put into separate envelopes, which are signed. When a certain element is needed again, it will not be necessary to start the process by developing a template.

Conclusion

Amazing compositions for the holiday, unusual gifts are made from corrugated paper. Simple flowers will help decorate the table, complement the interior.

An unusual option will turn out if you use different plants. Bright poppies, delicate cornflowers and chamomile are combined into a field bouquet. Multi-colored asters are complemented with greenery to give the composition a finished look.

Bouquets made of corrugated paper and sweets are especially popular. Sweet tooths will love them. You can collect any flower. It is only important to choose the right shape, size and number of petals.

To create flowers, you do not need to attend expensive courses, purchase tool kits. The manufacturing technology is simple and understandable even for beginner craftswomen. Working with such material will bring pleasure to adults and children.

Photo of corrugated paper flowers

Crepe paper is a unique material that allows you to create realistic products that imitate flowers, leaves, branches.

If you have some kind of holiday or celebration coming up, then there is nothing better for creating a festive atmosphere and decorating gifts than these elegant and air crafts.

The article presents master classes in which the master will teach you how to make a wide variety of flowers from corrugated paper with your own hands.

How to make your own crepe paper flowers

Let's consider a master class and try to highlight the main points in making a flower.

Tools and materials:

1. Corrugated colored paper.

2. Scissors.

3. Glue hot gun.

4. Aluminum wire.

5. Spool of thread.

Step by step process making paper flower

1. We start making flowers from corrugated paper with petals. To begin with, you need to make a petal template. We circle or cut out immediately by attaching the template to the paper.
2. The next step is to make the middle of the flower. It all depends on whether the whisk is closed or open. If it is not expanded, like a rose, then the middle will consist of folded petals. If like a cherry, then you need to make stamens.
3. You need to collect a flower in a certain sequence. The assembly must be done not only taking into account the type of flower, but also the purpose, whether it will be on the stem or not. If it is a flower on the stem, then, in most cases, it is formed from the middle to the outer petals. fold the corolla of petals, and the middle becomes the final point.

Try to practice making paper flowers using photo and video tutorials.

Corrugated flowers provide an inexhaustible source for ideas when decorating gifts. From the elementary decoration of a box with a gift to all kinds of bouquets.

A banal gift of chocolates will turn into a breathtaking bouquet of roses, and a simple bottle of champagne or wine will become a work of art.

From paper flowers, you can make applications and even whole paintings.

Paper flowers and vases at home

Corrugated paper flowers for a vase, and the vase itself can also be made with your own hands.

This master class will help you original gift or an interior decoration item.

Necessary materials:

• Multicolored corrugated paper.
• Organza Green colour.
• Golden organza ribbon.
• cardboard cylinder.
• Sheet of cardboard.
• Thin wooden sticks.
• Simple pencil, scissors.
• Hot glue gun.

Manufacturing technology:

Remember when we used to glue paper flowers on postcards for mom when we were kids? Now imagine that this cute hobby can become relevant today. A variety of craftsmanship techniques and properties of paper allow you to create paper flowers with your own hands, which adequately decorate gifts and look stylish in the interior.

DIY paper flowers - decor ideas

Flowers are always sunny, joyful and beautiful. That is why they are so fond of decorating the interior, surrounding themselves. good mood. And do-it-yourself paper flowers are a beauty that does not fade and does not require special care.

Do-it-yourself bouquets and compositions from paper flowers

Most often, elegant bouquets can be found as decor - fragile and delicate or bright and mischievous, they refresh the interior, create an atmosphere of spring mood.

Bouquets of paper flowers in the interior

DIY paper flowers on the wall - photo examples

Unusual interior decor are do-it-yourself paper flowers combined into whole panels on the walls. Large single buds or complex patterns of many small "blooming" details - make the house stylish and unique. Unlike bouquets, such a decoration becomes a rather bold decision that catches the eye, which means it requires a particularly careful approach and skillful execution. However, the effect of it is simply amazing!

Wall decor with paper flowers

DIY paper flowers for table decor

romantic dinners or family holidays also become more beautiful if you use paper flowers when setting the table. This detail with its style will help create a special mood for your feast, or it can convey your feelings.

Paper flowers for table setting

Topiary of paper flowers

Also very popular in recent times the decor of the interior was a topiary made of paper flowers. It is believed that the tree of happiness not only decorates the house, but also brings prosperity and love to it. The beauty and elegance of your topiary will depend on how good your do-it-yourself paper flowers will be with which you will decorate your tree.

Topiary of paper flowers

Paper flowers for a holiday and a photo zone

Corrugated paper flowers are the perfect way to set the mood for a holiday - from a quiet family event to a grandiose noisy celebration. And in this case, do-it-yourself paper flowers become more affordable and at the same time a very original alternative to live bouquets. With them, you can be sure that the decor of your holiday will not wither by the end, and if you wish, it will even remain with you forever as a memory of happy moments.

Holiday decor with paper flowers: gift wrapping, accessories, photo zone, bridal bouquet

Do you want your interior or holiday to be decorated with large paper flowers with your own hands?

Then read our article

DIY paper flowers for sweet bouquets

And paper flowers themselves can be a great gift, especially if they have a sweet center.

Bouquet of paper flowers with sweets

For detailed photos and video tutorials, as well as many ideas, see our article

Interior, holiday, gift - fragile and graceful do-it-yourself paper flowers will become a bright detail of any style and adequately cope with the task assigned to them. This decor is sophisticated and affordable at the same time. The main thing is to learn how to create it, and our selection of master classes will help you with this.

How to make a paper flower - more than 30 creation techniques for every taste + step by step photo

You have already seen how beautiful do-it-yourself paper flowers can be. So it's time to move on to detailed photo and video tutorials.

DIY crepe paper flowers and more!

Colored paper - great material to create vibrant holiday colors. Next, you will learn how to make flowers from crepe paper and regular colored paper for children's crafts.

Colored paper rose

Roses are a favorite flower of many needlewomen. Its beauty, elegance and at the same time the simplicity of manufacturing techniques allow you to create original decor even for beginners. Try it yourself to create such paper flowers with your own hands. And our various master classes will help you with this.

Option 1 - rose in a spiral

We will need:

• red paper (the color depends on your wishes, we focus on a classic rose);
• scissors;
• glue.

Cut out a 10x10 cm square. Draw a spiral on it and carefully cut it out with scissors. Then we form a bud by tightly twisting the spiral from the outer edge. Attach the outer edge with glue. Rose is ready.

You can glue a leaf to it and put it in a vase.

Rose in a spiral - step by step photo fulfillment

Option 2 - a large corrugated paper rose

We will need:

• red and green corrugated paper;
• stick or wire;
• floral tape;
• pencil, scissors.

First of all, you should create a template in the shape of a heart. Its size depends on what color you want to get. Thanks to this, using this technology, you can also create quite large do-it-yourself paper flowers that will decorate your interior or become a bright detail at a photo shoot.

Then, according to the template, you need to cut out six petals from red paper. Stretch them gently. Then we wind the edges of each heart-petal onto a pencil.

Now we collect the flower. Wrap the petals one at a time around the stem, securing them with ribbon.

Cut out leaves from green paper, glue them on a wire wrapped with floral tape. We fasten the leaves to the stem.

Cut out a wavy strip from green paper, which will become a cup of our rose. Let's wrap it around the flower. Fasten with tape.

Finally, we will form a common stem and wrap it with green paper.

Our delicate and voluminous paper flower is ready!

Stages of creating a large rose

Option 3 - elegant colored paper rose

We will need:

• sample;
• scissors;
• glue;
• wire
• pencil.

First, download the flower template and print it on colored paper. Cut out leaves and petals.

Secondly, with the help of scissors we twist the edges of the petals. Fold the leaves in half.

Now we collect the flower.

We wind the first petal onto the wire, fix it with glue. We wrap the second and third petal around the first petal, and also fix it with glue.

Glue paper flower templates 4-7 so that they take on a cone shape.

Now it remains to glue together all the resulting parts of the flower and leaves.

An elegant and voluminous rose is ready!

Rose from colored paper - photo instruction

Option 4 - rose with a twisted edge

This is a very popular version of the rose, due to its originality and simplicity. You don't have to cut and assemble a lot of details into a bud. All you need is crepe paper, floral tape and wire for the stem.

First, cut out a strip of paper - approximately 5x50 cm.

We hold the strip in our hands, stretch it slightly and bend the upper right edge towards us. We hold thumb of the right hand, the lower part of the formed triangle, and with the index finger of the same hand we cover the nail of the large upper edge, as if repeating the first bend. Now we hold the last wrapped layer of paper with our left hand, and with the thumb and forefinger of the right hand we bend the “loop” of paper between them away from us, as if you were spinning a candy.

As a result, you get a long ribbon with a twisted edge.

Now we turn our strip into a roll, tightly pull it from below with threads.

We carefully straighten the petals, insert the wire and wrap the stem and the base of the bud with floral tape.

The rose is ready!

How to make a rose with a twisted edge - photo

Callas - stylish do-it-yourself paper flowers

corrugated paper ideal for creating callas. They look realistic, stylish, and at the same time they are created very quickly even by beginners.

We will need:

• corrugated paper;
• wire;
• floral tape;
• yellow plastic;
• glue, scissors.

First of all, draw and cut out two identical calla leaves from paper. Let's glue them together.

Then prepare the middle of the flower. To do this, roll up a “sausage” from a plastic ball using a metal grater. So we will give a natural texture to the stamen. To keep the shape, dry the workpiece in the oven, after sticking a wire into it.

Now we collect the flower. Put a stamen in the center of the petal and glue its edges together. At the end, we wrap the base of the bud and the wire with floral tape - this will be the stem of the flower. Calla is ready!

Below you can see detailed step-by-step photos of how these do-it-yourself paper flowers are created.

Charming callas - photos of the stages of creation

If you do not have plastic, you can make the middle from yellow corrugated paper. Cut out a strip of paper and cut its upper edge with a fringe. And now we just wind it on the wire, fixing it with glue.

Calla lilies with a corrugated paper center

And you can use a long candy as a middle. A sweet bouquet of callas looks stylish and appetizing.

Callas with sweets

Bell - learning to make large paper flowers for home decoration

The cute crepe paper bells are so adorable that they can be used for a photo shoot or decoration for a children's party.

We will need:

• corrugated paper in blue and green;
• thin and thick wire;
• glue gun;
• scissors, pencil, ruler;
• flower pot.

The bells of two shades look original. To do this, use ombre paper or make it yourself with paint and spray.

So, we cut out a rectangle 18 cm x 23 cm from paper and fold it with an accordion five times. The top edge of the accordion is cut in a semicircle.

Expand and slightly stretch each semicircular tip.

Now we glue the paper in the form of a cylinder. Then we collect a smooth edge into a bundle, insert a thick wire (stem) into it and apply glue thickly. We are waiting for it to dry.

We cut out a strip of green paper and wrap it around the base of the flower and the stem wire, fixing it with glue.

It is necessary to make four more flowers and combine them on a thick arcuate stem.

Now we need to install our flowers in a pot. To do this, you can use a floral sponge, stones or alabaster solution.

You can add leaves to your composition. To do this, cut out the shape of the leaves from green paper and stick a thin wire horizontally and vertically on them with a glue gun. So you can give the leaves a natural shape.

Delicate bells are ready.

Corrugated paper bell

Dandelion, aster, chamomile, carnation - the easiest way to make a paper flower

Do-it-yourself paper flowers made using this simple technology are very bright and “live”.

You just need to cut the edge of a wide strip of corrugated paper the way the petals of the future flower will look like.

Then carefully twist the paper, inserting the middle if necessary, tie it with threads, and your flower is ready.

Add a stem to it or decorate a gift box with it.

DIY Narcissus - a detailed master class + step by step photos

Corrugated paper solar daffodils - perfect flowers for a spring bouquet. Such a composition will "enliven" your interior and cheer you up, even when it's raining outside.

We will need:

• corrugated paper in orange, yellow or white, green;
• thin and thick wire;
• scissors, wire cutters, glue;
• stamens.

Step by step master class

Take a small piece of orange paper, fold it in half and cut out the center of the flower according to the pattern. Please note that the three stripes on the template correspond to the direction of the stripes on the paper!

Let's make the top edge zigzag. Then we glue the part in the form of a cylinder, and after drying with our fingers, we give it the shape of a tube, slightly stretching the upper edge.

Now let's prepare the petals. Cut out a strip of yellow paper (the width is equal to the height of the petal), fold it like an accordion, attach a template and cut out six petals at once. Gently pulling out with scissors, we will give each petal the shape of an arc. Stretch the middle part of the petal a little.

It's time for the leaves. To do this, according to the template, we will cut out two blanks from green paper, slightly stretch them to make them realistic.

We will also immediately prepare long green strips about two centimeters wide, which we will need when assembling a flower.

So, let's move on to combining all the details into a single composition.

We insert the stamen into the orange center, squeeze the bottom edge into a bundle and insert a thick wire into it. We securely fix everything with a thin wire. Gently with your fingers from the inside, give the middle a rounded shape.

Now glue the petals to the middle. In the first row, evenly arrange 3 petals, and glue three more in the second row, in checkerboard pattern.

Your bright spring flower is ready! It can be sweetened by inserting candy instead of stamens.

Corrugated paper narcissus - photo + template

Realistic crepe paper violet flowers

Do you love delicate and modest violets? Then be sure to please yourself with the unfading beauty of a bouquet of corrugated paper flowers, which you can even make with your children.

We will need:

• corrugated paper in purple, green and beige;
• toothpicks, wire or paper clips;
• scissors, glue.

Cut out blanks for flowers. Please note that two blanks are needed for one flower. To save time, fold the purple paper like an accordion and cut out several pieces at once. Slightly twist the petals with a toothpick, for realism.

Cut out leaves from green paper. From beige - small squares-stamens.

Now we collect all the details.

We put on a square-stamens on a toothpick, wire or an aligned paper clip and squeeze it to the center, followed by two flower blanks and, finally, glue the leaf. It is more convenient to use a wire or a paper clip because, thanks to their flexibility, you can give the stem a natural bend.

Our fragile violet is ready. It remains only to place it in a decorative pot. To do this, pour earth, sand into it, or place a floristic or even an ordinary sponge, and stick violets.

See below a master class on how to make this do-it-yourself crepe paper flower, with step-by-step photos.

Violet - simple instruction photo

paper lily

Delicate lily is a masterpiece of nature itself. Surprisingly, this elegant flower can also be created with your own hands from corrugated paper.

We will need:

• white and green paper;
• thin wire;
• red, pink and green pencil;
• cotton wool;
• ground coffee;
• glue.

Cut out lily petals from white paper. We wrap the pieces of thin wire with a strip of white paper and glue them to the back of the petals.

Now we tint the petals. Grind the lead of pencils and use a cotton swab to apply them to the petal. With front side apply green tint, and on the back - pink. At the same time, the color will be more saturated near the middle, then it smoothly turns into white towards the edges. You can also add specks with a pencil at the base of the petal on the front side.

With your fingers or with the help of a bulb, we give the petals a convex shape.

The petals are ready. We create stamens. To do this, we cut the wire 10 cm each. At the end, we bend it in the form of the letter "T". We wrap the wire with white paper, dip the bent end in glue, and then in ground coffee. Instead of coffee, you can use crushed brown or yellow lead.

We will make a pestle from a wire of greater length. We also wrap it with white paper, and at the end we make a thickening of cotton wool.

Collecting a flower. We tie the pistil and six stamens together with a thin wire. Around them we collect three petals (larger ones). Then the second row, in a checkerboard pattern, add three more petals (narrower). We tie everything with a thin wire.

We stick a wire-stem into the base of the flower, cut out narrow leaves. Now we wrap the stem with a strip of green paper, while adding leaves.

Your amazing lily is ready.

Magnificent lily detailed master class with photo

Also, to create this lily, you can use fabric instead of paper.

For ideas and workshops on fabric flowers, see our article.

Bright tulips made of corrugated paper

Making tulips from crepe paper is very easy. Here we will look at one technique for creating this flower, and below, using the example of a sweet bouquet, you will learn the second option, how to make a flower out of paper.

We will need:

• corrugated paper in red, green, brown and white;
• wire 0.5 mm;
• wooden stick or thick wire for the stem;
• scissors, glue, thread.

Cut out the petals and leaves of the tulip according to the template. Glue to it a piece of wire 5 cm wrapped in red paper.

We make a pestle. To do this, wrap a thin wire with white or pale yellow paper. We cut it into two parts, fold it crosswise and twist it to form a pestle.

We wrap a few more pieces of wire with brown paper - we get stamens.

Collecting a flower. First we wind the pestle to the stem with threads. Add stamens around the pistil and also fix with threads. Then add the petals in two rows of three. We wrap the stem with a strip of green paper about 1 cm wide, capturing the attachment point of the stamens and petals. Don't forget to add a leaf and glue everything together.

Tulip - template and step by step photo

Sunflower - such sunny do-it-yourself paper flowers

Corrugated paper sunflower is a small warm sun that will give you a summer mood in any weather.

We will need:

• corrugated paper in yellow, green, light and dark green shades;
• wire;
• wooden stick;
• glue, scissors.

Let's start by making the middle. To do this, cut out long strips of light and dark brown paper, approximately 6 cm wide. Cut the edges of the strips with a fringe.

Now fold the two strips together and roll into a tight roll. Fix with wire.

When the middle is ready, go to the petals. Cut the yellow paper into 6x4 cm rectangles. Turn the rectangles into petals by rounding the ends and twisting the edges a little.

Glue the wrapped wire to the leaves.

We begin to collect the flower. We glue the petals to the core so that the next row is visible through the gaps in the first row. When all the petals are glued, glue the sepals. We stick the stick into the base of the flower.

Hide the junction with a flower bed. To do this, cut out a strip of green paper about 15 cm. Slightly twist the edge. We glue in the form of a cylinder. We put it on our stem, glue the thickened edge to the sepals, and squeeze the other end on the stem.

Now we wrap the stem stick with a strip of green paper, inserting leaves along the way.

Our sun is ready!

The more carefully and accurately you work through each element, the more realistic your paper flowers will look with your own hands.

Bright sunflower - step by step photo

Unusual bouquet - do-it-yourself paper flowers from old magazines

This bouquet is unusual and unusual at the same time. It looks stylish and romantic, while making it easy even for beginners. It does not require much effort and time, but the result is admirable. And it is based on such simple do-it-yourself paper flowers.

We will need:

• glossy magazines;
• green floral tape;
• scissors, glue;
• thin sticks.

We select bright pages in magazines, fold them in half, and then again each half to the central fold.

We cut the folded strip with a fringe from the side of the folds, leaving about one centimeter to the base.

Now wrap the cut strip around the stick and fix it with glue. You can use adhesive tape. Wrap the stem stick with green ribbon.

Let's fluff the fringe a little and our do-it-yourself paper flower is ready.

A bouquet of several such flowers will become original decoration your interior.

See step-by-step photos below for more details.

Flower from a magazine - create from a photo

Very beautiful and unusual flowers do-it-yourself paper is obtained using the quilling technique.

Try to make them with your own hands according to the master classes in our article

Corrugated paper hyacinths - tender as spring

This bouquet of hyacinths looks very cute and elegant, and it is very easy and fast to create!

We will need:

• green corrugated paper for stems and leaves and a few more shades for flowers;
• glue gun;
• scissors;
• skewers and toothpicks.

Let's cut the paper from which we will make our paper flowers with our own hands into wide strips, fold them several times and cut the fringe. Then, using a toothpick, “wind” each thin strip of fringe. Wrap a strip with a fringe on a skewer and fix it with glue. Wrap the rest of the skewer with a strip of green paper. Cut out the leaves and glue them to the stem.

Such a bouquet is a great opportunity to create a feeling of spring in the house.

Paper hyacinths photo

Poppies - do-it-yourself lush paper flowers

Poppies are so quivering and fragile that we just want to admire their beauty. However, saving a cut flower for a long time will not work. But with a bouquet of delicate paper poppies, you can decorate your home, festive table, or even use it as a bridal bouquet.

We will need:

• red corrugated paper - the basis from which we will make paper flowers with our own hands;
• thick wire - for stems and thin - for stamens;
• glue "Moment" or glue gun;
• green floral tape.

Let's prepare a template for the petals in the form of a droplet. According to the template, cut out the petals from paper - five pieces per flower. We stretch each petal a little with our fingers to give it a concave shape.

Now let's prepare the core. For this stamen. We cut a thin wire into segments of approximately 20 cm long. We fold each segment in half and twist it into a flagellum, while leaving a loop on top. Color the wire with a black marker. You can also put a black bead on the tip of a single wire or use ready-made stamens (as in the photo). Glue 7-8 stamens together.

We stick a thick wire into the base of the flower and carefully, grabbing the bottom of the bud, wrap the stem with floral tape.

Now straighten the petals, giving the flower the desired shape. In the middle between the stamens, you can insert a lump of gray paper for greater realism of the flower. Our poppy is ready!

Several of these flowers can be tied with a ribbon or placed in a vase.

How to make paper poppies

We described other ideas for creating paper poppies in the article.

Corrugated paper peonies

Now let's move on to creating airy and stunningly realistic peonies.

Making them is not as difficult as it might seem at first glance. But the finished bouquet will definitely cause admiration and a desire to touch it to make sure that these “live” petals are really made of paper.

We will need:

• white or pale pink crepe paper;
• tea cup;
• watercolor paints and a brush (you can use a spray gun);
• green floral tape
• stems from old artificial flowers with a bud base (if there are none, we will create the stems ourselves from thick wire).

We cut out petals of a round (possibly slightly elongated) shape from paper, approximately five per flower. In this case, the size of the petals may vary slightly.

Now dilute the paint color you need in water (we used two - pink and yellow). Then we put the petal on the bottom of the inverted cup and lightly apply colored water to it with a brush. You can use a sprayer. We do the same with other shades until we get the desired palette of colors on the petal.

Now put the petal on the cup in the microwave for about half a minute, until dry. Carefully remove the finished petal so as not to spoil its shape and proceed to create the next one.

Now let's make the core. To do this, cut out and tint a strip of paper with a pale yellow tint, cut its edge with a fringe and twist it.

We insert the core into the base for the bud of the old stem or glue it to a thick wire wrapped in green floral tape.

Carefully glue the petals one by one to the core. We decorate the base of the bud with floral tape.

Make a couple more of these flowers and a few unblown buds, add some "greenery" and pick up a delicate vase. Your charming bouquet is ready! It is so "alive" that it seems you can even smell its aroma!

For even more interesting ideas on how to make these crepe paper flowers, read our article.

Romantic paper garland

"Light" and delicate decor for home and garden parties - a garland of paper flowers. It is very easy to make and looks amazing!

We will need:

• thin paper in multiple colors happy holiday choose bright colours, and for a romantic mood it is better to choose close pastel shades;
• thin wire;
• fishing line;
• scissors, PVA glue.

Cut the paper into rectangles of the size you need (their width is the diagonal of the flower, the length should be about twice as long). Now let's arrange the rectangles into stacks of five pieces and fold each stack with an accordion in width.

Tie the middle of each accordion tightly with wire. Round off the ends with scissors. Now we straighten the layers of the accordion, wrapping the upper rectangles closer to the center. We should get the flower flat on the bottom and evenly fluffy on the other side.

We glue two such flowers together on a fishing line. Repeat such large paper flowers a few more times - and the elegant garland is ready.

paper flower garland

Do-it-yourself flowers from napkins

When you urgently need to decorate a box with a gift or make the table setting festive, do-it-yourself flowers from napkins will save you. Making them is very simple, the main thing is not to damage their delicate petals in the course of work!

Peony from napkins

The technique for creating a peony is similar to the one we used when creating a garland.

We will need:

• napkins
• wire

At the very beginning, carefully cut off the edge of the napkins (but not the fold!) To make the petals look natural. Save the cut strips.

We unfold the napkins so that we get a rectangle, we put them one on top of the other (the more layers, the more magnificent the flower will be). Then we fold our stack of napkins with an accordion and pull it with a wire in the middle of the accordion. We close the wire with a torn edge of napkins. Then straighten the layers, lifting them. Peony is ready!

Dandelion - a simple do-it-yourself paper flower

We will need:

• yellow napkins;
• stapler

Put a few napkins in a pile, fasten them together in the center with a stapler, criss-cross. Then we cut the napkins in a circle and cut the edges with a fringe, about a centimeter deep. Now we consistently lift and squeeze each layer of the napkin to the center. Our fluffy dandelion is ready.

You can add leaves or a wire stem to it. This flower will great decoration any spring holiday.

"Puffy" roses

Also from multi-colored napkins such unusual roses can turn out. To do this, you need to wind a little napkin on a pencil, then remove it and form a rosebud from the resulting volumetric blank.

Napkin flowers can be a wonderful bouquet for moms.

About what else you can please your beloved mom, read in our article.

Origami is a fun way to make paper flowers with your own hands.

A more complex, but no less expressive and interesting way to create paper flowers with your own hands is the origami technique. Try yourself in this art!

twisted rose

Kusudama flowers

tender lotus

Tulip

You can learn more about these and other master classes in our section.

Corrugated paper flowers with candies

A touching spring bouquet with your favorite sweets inside will be a wonderful gift for the eighth of March and just a nice surprise for your mother, grandmother or girlfriend.

Snowdrops, tulips, crocuses

You can make this bouquet of snowdrops, tulips or crocuses. You can make these flowers from corrugated paper with sweets using one technology, changing the colors of the petals.

We will learn from the example of a fragile bouquet of snowdrops.

We will need:

• corrugated paper in white, light and dark green colors;
• floral tape dark green(same tone as paper);
• floral wire;
• glue gun;
• thread or tape, ruler;
• chocolate candies.

Manufacturing steps

Our bouquet will consist of five flowers.

1. To do this, cut five strips of white paper 2x50. Cut out five 5x4 rectangles from light green paper. From dark green paper - two strips 2x50.
2. Glue the candies to the wire - wrap the wrapper around the tip of the wire and fix it with glue or tape.
3. Now we will prepare the middle of our flowers. To do this, use your fingers to make a wavy edge on each of the light green rectangles. Then stretch this rectangle from the center to the edges. Thus, we get a recess for candy.
4. Let's move on to creating the petals. To do this, we divide the white stripes into three equal parts, twist the resulting 15 segments in the middle by 360 degrees.
5. Then fold each segment in half and use your fingers to stretch the petal from the center to the edges to create a convex shape.
6. Let's start assembling the button. First, wrap a light green rectangle around the center candy. We fix it on the wire with threads or tape. Then we apply the petals in a circle, slightly overlapping one another. Fix securely.
7. Cut the edges of the petals at a 45 degree angle to the stem.
8. Cut out the leaves. To do this, divide the strips of dark green paper into four parts. From each of the eight pieces obtained, cut out the leaves. We give them a convex shape.
9. It remains to arrange the stem. We wrap it with floral tape, grabbing the ends of the petals so that the transition is smooth. In the process of winding, we insert the leaves, dropping glue on the tip for a more secure fastening.
10. When all our flowers are completely ready, we combine them into a single composition. If desired, decorate with ribbons, beads.

Such a delicate bouquet can be put in a vase or decorate a gift box with it.

Snowdrops, tulips, crocuses with sweets - master class and step by step photo

Back 1 Of 20 Further

Flowers and sweets - what gift could be better? Beauty and sweetness are so elegantly combined in a bouquet of sophisticated corrugated paper orchids with chocolates.

We will need:

• corrugated paper of several shades;
• chocolates of 2 varieties of different shapes;
• wire;
• thread or thin wire;
• scissors, marker;
• floral sponge;
• box.

Step by step master class

For flowers, it is better to choose elongated candies so that the finished orchid looks more realistic. Let's make a loop at the end of the wire for the stalk and wrap the tip of the candy wrapper around it. We fix with threads or thin wire.

When the centers are ready, we move on to creating the petals. To do this, cut out blanks in the shape of natural flowers. Or use ready-made templates.

Make the “core” from a lighter shade and draw a “natural” pattern on it with a marker. Carefully wrap this petal around the candy and tie it to the stem.

From paper of a different shade, we cut out petals of excellent shape. For one flower, you need 2 large round petals and 3 elongated petals. We also fix them on the stem with wire or thread.

We wrap the base of the flower and the stem with a ribbon of green paper.

Now let's make a branch with buds. To do this, we fix round candies on the wire. And then just wrap them and the stem with green paper.

For variety and splendor of the bouquet, add other flowers to it.

Wrap round candies on a wire with paper or foil. Cut out a wide strip from paper of a different shade, fold it in half and cut a fringe from the side of the fold.

Fasten the fringe around the candy on the wire, secure with a thread. Wrap the base of the flower and stem with green paper.

Now let's move on to the decor of the box in which our bouquet will be located. If the original design is not to your liking, we will make our own. We suggest that you cover all the outer edges of the box with corrugated paper and decorate with beads, ribbons or sisal fibers.

Simple flower bouquet with caramels

Do you want the gift to please the hero of the occasion for as long as possible? Then present him with a bouquet of paper flowers and caramels. Moreover, this charming and cute composition is very easy to perform.

We will need:

• corrugated paper - green and any other shade;
• caramel;
• wooden sticks or thick wire for stems;
• threads;
• scissors;
• scotch.

With the help of threads or adhesive tape, we fix the sweets on sticks or wire.

When the sweet centers are ready, we move on to creating the petals. To do this, cut the paper into wide strips (the width of the strip corresponds to the height of the petal). Then we fold each strip so that the petal can just fit on it (the width from fold to fold is equal to the width of the petal).

Now we cut out the shape of the petal, but so that there are not cut edges on the sides and our strip of paper turns into a garland.

We form a flower. We wrap the tape on the stem with the sticky side up at the place where the base of the flower will be. Now we gradually wrap a garland of petals around the caramel, gluing it to the adhesive tape. We will correct all the petals and firmly fix the base of the bud with threads.

We wrap the stem with a strip of green paper, hiding under it the area with threads.

One sweet flower is ready! Gather a whole bouquet and please your loved ones!

Simple candy bouquet

Back 1 Of 5 Further

We will need:

• box of chocolates;
• corrugated paper;
• golden threads;
• film for baking;
• scissors.

We cut out squares and rectangles from paper, fold them separately so that the distance from fold to fold is equal to the width of the petal, slightly round the upper corners and make uneven cuts along the upper edge.

We unfold the paper, gently give the petals a bulge with our fingers and slightly wind their edges onto the shaft of the pen or a toothpick.

Now we cut out squares from the film and wrap sweets in them (it is desirable that the sweets were in foil). From below, wrap the edges of the film with threads.

Next, wrap the petals around the candy. Make the first circle from a square of paper without deep cuts, so that you get a slightly opened middle of the bud, in which the candy will hide. Make the next layers thicker. At the end, securely fix the base of the flower with golden threads.

Expressive gladioli with sweets for women and men

This sweet paper bouquet is perfect as a gift for men, colleagues or a teacher. Bright, expressive - only the chocolate center distinguishes it from a real flower!

We will need:

• corrugated paper - pink, lilac, purple, green;
• chocolates - 9 pcs.;
• glue gun;
• floral tape;
• toothpicks or wire;
• scissors, thread.

Let's start our bouquet by making buds. To do this, we cut the paper into strips, the width of the strip is about 1 cm. We twist each strip in the middle and bend it in half. Then stretch in the middle and bend.

We drag one such green strip from below with threads - this will be the topmost bud.

The next two buds are made in almost the same way, but from two green blanks folded crosswise.

In the indicated sequence, we attach the buds to the wire-stem, wrap it with floral tape.

For flowers, cut out six oblong-shaped petals from colored corrugated paper. With the help of scissors, we give them an arcuate bend, and gently stretch the edges to get a beautiful wave, like real flowers.

Then, with the help of threads or thin wire, we tie three petals to the candy, and then three more between the first.

For each gladiolus we make three flowers.

We attach green sepals to each flower. Flowers are ready.

We glue them to our stem with buds. Cut out and glue oblong green leaves here. Wrap the stem with floral tape.

Any celebration decorated with flowers looks more elegant. But it is not always possible to use fresh flowers. Then large flowers will come to the rescue, which can be made from corrugated paper.

How to make large flowers quickly and easily from corrugated paper is not difficult to understand. We offer several flower options.

Making big crepe paper flowers: rose

Making a paper rose is very easy. For work we will use wire, glue, corrugated paper, scissors.

Cut out hearts from crepe paper. We make them as many as there will be rose petals. It is important to ensure that the grooves of all the petals are vertical, otherwise the flower will not work.

We stretch the cut out heart in the central part from the middle to the edges. We pull with a little effort, as if smoothing out the grooves. We twist the semicircular upper parts of the petal with a regular pencil. We twist from the front side.

Take a few twigs and wrap them with green tape or paper, and fix the edges with glue. These are stems.

Cut out a leaf from green corrugated paper and do the same procedure as with petals. Glue the leaf by carefully wrapping the lower part around the stick.

Now we attach the flower petals to the resulting stem. We wrap them around the stick, carefully gluing them in layers one on top of the other. Arrange the petals so that they move overlapping in a circle.

We cut out a zigzag strip from green paper, we will form a cup from it. Glue the cup on top of all fixed petals. You can use green adhesive tape to secure the parts of the flower. We attach another green leaf near the calyx of the flower.

When all parts are fixed, the flower is ready.

The resulting flower can be used for a photo shoot - at a wedding, birthday. You can decorate the interior with it, use it as a decoration for a celebration.

Another master class is on making a chrysanthemum flower.

We take several large sheets of corrugated paper of the desired color. We stack them one on top of the other in a pile, making sure that the edges match. The more layers there are, the more magnificent the chrysanthemum will turn out. Now we bend the paper like an accordion, making folds towards each other. We choose a small width, about 1 cm, then the flower will look lush and neat. Having made bends on the entire surface of the sheet, we get a puff accordion. We fix the middle with wire. Trim the edges so that they are semi-circular. Now you need to spread the petals. We separate the layers of paper and stretch the beards in the paper a little. Carefully fluffing the folds, we get a fluffy and bright chrysanthemum.

Another version of the execution of the rose - blossoming and full.

Cut a sheet of A4 size paper into 2 parts. We take about 15 such A4 sheets. The cut parts are the future petals. After you cut the sheets and got the blanks, you need to cut off the top of each piece of paper. The shape should be semicircular, it is convenient to use a template for this. To make a template, take a dense sheet, the dimensions of which are equal to the dimensions of the resulting rectangles. Cut its top in a semicircle, after drawing a line with a compass, protractor, or by hand. Cut the petals according to the pattern.

Roll up a ball from the scraps left over from forming a semi-circular shape in the petals, wrap the ball with another rectangle. This is the core of the flower.

To form a petal in the middle of each blank, run your fingers from the middle to the edges, stretching the vertical grooves of the paper.

Now we proceed to wrap the cores with blanks of petals. Moving in a circle, glue the petals so that the concave shape looks inward, as in a real rose.

When all the petals are fixed, we attach the rose to the stem. Gently glue the green wire on the side and close it with a green sepal, as in the first example. It turns out a fluffy full rose. Candies can be used instead of paper in the core. By giving such a bouquet you will make big surprise sweet tooth.

Paper flowers can be used as wall decorations. Having made colorful plants, use them in the interior. Such flowers, unlike cut ones, will delight the eye with bright colors all the time - they will not wither or dry out.

Making flowers from corrugated paper with your own hands is simple and pleasant. The creative process does not take much time. To work, you need a minimum of material, and the result will always please the eye with the unusualness of the solution and the brightness of the colors. Flowers can be used as decorations, making a festive photo - you get an actual accessory.

Video on the topic of the article