How to weave from wire. Wire weaving: features of work and examples of finished jewelry. Wire jewelry

Multifunctional material with a huge scope for creativity. According to numerous studies, its traces are found as early as 3000 BC, mainly in a variety of women's jewelry. Of course, then it was rather an elite material due to its high cost and complexity of production. It was made by hand, cutting sheets of metal and twisting them together, after which they were additionally rolled between metal bars. Sometimes thin strips of metal were simply wound around a round core to create a strong and flexible material.

With the development of forging, its production was simplified, and its role grew. Now not only pendants were made from it, but also chain mail, fish hooks, candlesticks, household items and much more. Today, it has not lost its relevance, and anyone can acquire it without any problems.

Kinds

Naturally, the work largely depends on the material, so its choice should be approached responsibly. The best choice, including for beginners, there will be a specialized art wire for weaving, presented in a huge variety in. It is easy to bend and twist, has a large margin of safety, and is also available in various color variations.

Distinguish:

copper. The most common variety, which is distinguished by its aesthetic appearance, as well as good properties. Copper does not rust and withstand heavy loads, and is also easy to bend and suitable for even the most complex circuits. The relatively low price is suitable for beginners, but even professionals often use it in their work;
galvanized. Its main advantage is unusual color applied using galvanization technology. It usually imitates another metal, more shiny and expensive, such as gold. However, it is worth remembering that the coating on the products is subject to aging, and after a while it will gradually wear off, and the decoration will lose its original appearance;
jewelry. This is an upscale version of precious metals which is used in jewelry. As a budget option, there is an alternative - brass, covered with a layer of knurled silver or gold.

Thickness is also important when choosing. Thin options are much easier to bend and weave, but, in turn, are more brittle, and in order to work with a thick one, you need to make some effort. The best choice would be a combination of segments of different diameters - for example, make the main frame and decoration parts from a thick one, and then fasten them with a thin one through a special braid. In artistic wireworking, a diameter of up to 2 mm is used.

However, there may be a problem here. Depending on the manufacturer, the diameter is marked in different ways, which is why it is sometimes difficult to choose exactly the one you need. The size of domestic manufacturers is indicated in millimeters, but the so-called caliber, aka Gauge, is typical for foreign ones. The higher its value, the thinner the wire - so Ga 30 corresponds approximately to 0.25 mm.

Tools

Of course, working with wire is not easy at first, especially if you want to learn how to weave jewelry at a professional level. However, to begin with, such a minimal

pliers. In needlework, it is customary to use models with completely flat clamps - locksmith options with teeth can damage the rod and leave notches on it that will ruin the final product. This tool is needed in cases where it is necessary to tighten the material, bend it at an angle or fix knots. Also, with their help, you can smooth out the protruding ends, which can ruin the whole composition;
wire cutters. They are indispensable when you need to make segments of a certain length. The most versatile choice will be side cutters, as they are suitable even for fine work and make it possible to cut the wire at the desired angle;
pliers. The funny name fully reflects their appearance. Round-nose pliers are used for twisting into rings, and are also intended for curling loops;
protection. You need to work with caution - sharp ends leave serifs on clothes and scratch, and a piece that has bounced off when cutting can get into the eye. As protective equipment it is worth choosing thick gloves and goggles if you work with large diameters.

Knowing how to work with such tools, you can already create a large number of various ornaments of an intricate form. If you want to make weaving more convenient or seriously engage in the manufacture of high-quality jewelry, then you can not do without:

vise. This is a braiding device that will allow you to fix the wire, and weave it with a special hand drill. Although this action can be done independently, a vise drill greatly speeds up and simplifies the process, saving time and effort for heavier elements;
winder. It consists of two rods with eyelets and a handle that holds the whole structure together. Allows you to quickly twist several skeins together with even, neat turns, which simplifies the creation of spiral beads or earrings;
rod. As a rule, it is a long cone with a blunt end, which gives the rings the correct shape. However, it can be replaced by any similar object - a wooden dowel or knitting needles;
anvils. The small anvil is widely used for work hardening and also for straightening. This is a rather expensive tool that you need to carefully work with - take a special hammer and check the integrity of its surface each time. Otherwise, all the irregularities on it will be repeated on the wire product;
accessories. These include all kinds of pebbles, beads, beads, locks and other trifles that are designed to finalize the product. A real master uses jewelry fittings not just at his own request, but intelligently weaves them into the product itself, thanks to which it becomes its functional element. So you can hide the protruding ends or mask the joints.

Weaving is difficult, but an exciting hobby, with which you get the opportunity to create exclusive and unique gifts. It develops creativity and allows people to open up, showing the results of painstaking work. It is only important to remember that patience and imagination are your main friends.

Schemes and methods of weaving from wire

The first and second figures show different ways of weaving two, three or more pieces of wire. Weaving in the form of a braid (Figure 1, I a, b, c, d, e) . They take a piece of wire, bend it, fasten the second wire to the first one at the bend. For convenience, the upper part is fixed with a nail to the board and weaved, as indicated in the figure. You can make a rope out of two wires. Having connected two pieces, twist them to the right or to left side. Two "strings", twisted in different directions and put together, form a Christmas tree.

Wicker "path" (Figure 1, II a, b) . Taking a wire 1.5 mm thick, bend one end of it, and weave it with thinner wires at the bend until the width necessary for your track is formed. Having finished the first row, the end of the first piece of wire is bent, passing it between the ends of the entire braid, like the movement of a shuttle in a loom, and weaving of the second row begins. Having finished the second row, the end of the first piece is again bent and passed between the ends of the braid, but from the opposite side. In this order, weave the track to the desired size.

Braided round belt (Figure 1, III a, b, c, d, e, f, g, i, j) . The figure shows in sequential order the weaving of a girdle from the four ends of the wire.

When weaving, you need to remember that each row ends with threading the last end into the loop formed when the initial one is bent. A new row can be started from either end, but the last one must be threaded into the loop of the first, thus completing the weaving of the row.

The belt is woven from any number of wires. Figure 2 shows the weaving of two belts around the rod (front view and side view). The rod is made up of several wires laid in a row close to each other.

The first end of the wire is wound behind the rod and forms a loop on the side of the rod, and the second end of this wire, encircling the rod with front side, is threaded into the formed loop and wound up behind the rod. Then the rod is encircled with the first end of the wire from the front side and threaded into the loop of the second end, and so, performing row after row, you can get a belt of any length.

The second exercise is slightly different from the first, the sequence of its implementation is shown in the figure.

Ideas: what interesting things can be woven from wire

Round wire stand:

On a board of small thickness, carnations without hats are driven in in a circle at the same distance. Then, with two pieces of wire 1.5 mm thick, the studs are braided around in opposite directions. The third piece of wire is placed radially between the nails, fastening the outer braid. The center is tied with a thin wire. The resulting frame is braided with a fourth, thinner piece of wire. Weaving on the frame starts from the center. Having fixed the end of the wire, weaving is carried out in a circle, alternately bending around from one side, then from the other, radially located threads.

Wire basket:

The frame is assembled from an even number of pieces of wire - 6, 8, 10 or more, depending on the size of the basket. First arched correct form ring, and then from one piece two risers, bottom and handle and fasten them to the ring. Further, the rest of the risers and the base for the bottom are bent out of four pieces. Having bent the upper ends, they are hung on the ring, tightly secured with pliers.

First of all, weave the bottom. Having fixed the end of the wire in the center, several weaves are made in a circle, similar to the weaving of the stand, and then they switch to the weaving of the radial threads that form the bottom. In the same way, the risers of the sides are braided.

With this method of weaving, gaps remain between horizontally running threads. The base of the handle is braided with a thin wire, tightly fitting the spiral rings to each other.

Wire shopping bag:

For work, you will need a thick cardboard, equal in size to the intended bag. Points for the holes for attaching the handles and the frame of the bag are marked on it with a pencil. Holes are pierced in the designated places with an awl and two metal or wooden rings for handles are made. The finished handles are placed on the cardboard (at the attachment points on both sides) and fastened to the cardboard with a thin cord or wire, as shown in the figure.

In the manufacture of the frame, the wire threads are passed through the holes and thrown onto the rings of the handles. Then, in one of the ways, they start weaving from the bottom up. After the sides of the bag are ready, the cardboard is removed. For winding handles use a thin wire.

DIY colored wire flowers:

Figure 6 shows how to make flowers from spirals.

The flowers are collected in a bouquet and the "stems" are wrapped with thin wire, the ends are divided into separate bundles (8 - 10), which serve as a frame for weaving the base of the vase. The weaving method is the same as for the sides of the basket (see Figure 4).

Dog and deer:

The body and head of a deer are woven in the form of a round belt (see Figure 1).

The front legs are woven into the body and pass into the neck, made by the method of spiral winding. The doggy consists of a frame braided with a coil.

How to bend and join wire

Many different items can be made from wire - from the simplest hook to the most complex patterns. Suitable copper, iron, steel, aluminum wire and telephone cable with a different color coating. The wire is stored wound in circles. Of the tools you need: a hammer, a small vise, a file, pliers, wire cutters, pliers, pliers, round nose pliers, metalwork scissors, a soldering iron.

The wire is straightened by pulling it between two wooden blocks or by pulling it tightly around a round metal rod (door handle). Steel wire or thin bar metal is best straightened on a hard surface with a hammer or mallet. Small parts are bent with pliers or round nose pliers. Large and hard - bend in a vice.

Iron and copper thin wire is cut with wire cutters and pliers. Steel - in the place of the cut, it is preheated over a fire. Strip or sheet metal is first marked out, and then slightly incised at the marking points and chopped with strong blows.
Separate pieces of wire and other metal parts are connected by bending or soldering. In the first case, several turns are made, pulling the wire onto the rod. Before soldering, the surface of the parts is thoroughly cleaned with a file or sandpaper from dirt and rust. The wire is soldered by folding the two ends together, after twisting them for strength. A thin wire can be soldered using a paste - tinol, which is applied in a thin layer to the place of soldering and heated over a fire.

To learn how to do things from wire well and cleanly, you must first make some simple details:

Spiral spring. A wire 1-1.5 mm thick is wound on a round wooden dagger of a cylindrical or conical shape (Figure 1, a).
Rings and half rings. The spiral-spring is cut lengthwise (Figure 1, b).
Flower. Six half rings are soldered to the ring (Figure 1, c).
Gear. Six half rings are soldered together [Figure 1, d).
Spiral. They take the end of the wire with round-nose pliers and twist it around by rotating the hand in a circle (Figure 1, e).
Openwork of three spirals (Figure 1, f).
Openwork leaf. On a blank of a conical shape, 4 - 5 rings are made (wire thickness - 0.5 - 1 mm). The resulting rings are shaped as shown in Figure 1, g, and soldered at the base.
The shamrock is bent from one wire with pliers (Figure 1, h).
Wave (Figure 1, i).

Star and ornamental stripe. On a board of small thickness, mark out the drawing and drive in nails without hats:

net:

Flower girl. A bracket with a spiral termination is bent from a two-millimeter wire. Separately, the ring is rolled up and fastened by intercepting the sides. At the top, the spirals are connected by three turns of wire (Figure 4).

Furniture. It is made from one and a half to two millimeter wire. Its parts are fastened together with coils. Thin-layer plywood or cardboard can serve as a seat and table top. For fastening in plywood, small holes are made with an awl (Figure 5).

Puzzle. It is necessary to separate its parts so as not to bend the wire anywhere and not to compress it (Figure 6).

Horse. From two pieces of wire 2.5 - 3 mm thick, the legs and two lower spirals are bent. From the third piece make the head, neck and upper spiral. From the fourth - a mane, turning on the back into coils fastening pieces of wire. The mane is soldered in several places (Figure 8).

Heron. It is made from one piece of wire (section - 3 mm) with spiral rings for a decorative vase (Figure 9).

I. Lyamin, Family and School magazine, 1971

Wire weaving using the Wire wrap technique for beginners. How to make your own wire jewelry. DIY wire jewelry.

DIY bracelet made of copper wire. For the bracelet, I used 2.2 mm thick copper wire. Two wires 1.5 mm thick twisted together. The semicircular wire of which he braided was made of wire 1 mm thick (using […]

Master class from Anatolyevich. Pendant made of nickel silver wire and natural cabochon using wire wrap technique. The other day I received a parcel with natural cabochons. Ordered online from here. Today I made a pendant from Serpentine. I used wire from […]

Natural cabochons for wire wrap jewelry. Online store (online store) - https://cabochonservis.ru/ instagram - https://www.instagram.com/cabochon_servis_2/ instagram - https://www.instagram.com/cabochon_servis_master/ . Online store in Russia (Novosibirsk) with natural cabochons (100% quality guarantee). Delivery to any country. Look […]

Master class for beginners working in the wire wrap technique. We continue to study the basic methods of weaving wire. We will braid two main wires. Let's make some of the most popular braids. The requirements, as always, are the same - the braid must […]

We decorate the glasses with a braid of copper wire using the Wire Wrapping technique. In my opinion, a promising direction in which you can work hard. I'll show you the simplest copper wire braided version. I will not describe in detail. […]

How to make a simple wire wrap for jewelry using the Wire Wrapping technique. A small photo lesson for beginners. Quite often I use such a spiral in my jewelry. I make from different wires (copper, silver, nickel silver, brass, etc. […]

Do-it-yourself pendant made of copper wire with ammonite (petrified shell) using the Wire Wrap technique. Photo lesson from Anatolyevich. This is not a complete tutorial, I wanted to show you an interesting way to attach an ammonite. Ammonite is held securely, does not dangle. Used […]

Pendant made of copper wire and beads. Photo master class from Anatolyevich for beginners. We use copper wire 1 mm and 0.4 mm thick. I use ordinary copper wire "pulled" from electrical wires. Natural stone beads. […]

Wire and its varieties can be used both in the manufacture of some decorative products, and in an independent form. Due to the flexibility, crafts made from this material are accessible even to schoolchildren, and a rich variety of species allows the imagination to diverge. We will learn how to get started simple crafts from different types of wire.

Chenille Animals

To determine which wire to use for crafts, you need to start from how old the child is taking part in the creative process and what you are going to do.

To create animals, fluffy colored wire is suitable, which children like younger age It is flexible and not brittle. To begin, form a small nub at the end of the wire, then wrap the next piece around a pen or marker and continue as a squiggle tail, pulling out the stationery.

Cut off two small blanks and bend at the tips of the paws, then attach to the body. The color and shape of the figure will determine the type of animal, stick the eyes on the muzzle. From this funny wire you can make plastic men and other interesting things.

copper wire horse

Cut two pieces of wire, one longer than the other. The short one will serve as legs when we bend it at an angle, and the long one will take on the shape of the horse, including the head on the side.

We wrap the entire body of the horse with wire in a colored sheath, ring to ring, close. In places of hooves, the wire is wound repeatedly in a thick layer so that the animal is stable. By the same principle, you can make other animals by finding photos of crafts on the Internet.

Flower

This DIY wire craft is original and not as simple as the previous ones. Previously, a paste is boiled from starch, cotton pads are dipped into it.

After drying, we paint from it, cut out the petals and fasten several pieces together, highlighting the core with yellow and white paint, which will then be occupied by a piece of cotton wool. A stem is made of wire, wrapped with green tape or electrical tape, leaves are added and fastened with a flower.

Wood

With the help of round nose pliers, hard wire and beads, you can create amazing jewelry. Having twisted a spiral trunk from several pieces of thick wire, we bring them into graceful branches. They can intertwine with each other, and then grow apart, giving the tree sprawling.

Red bead fruits appear in the loops, oblong green bugle beads cover strong branches with dense foliage. It is important to firmly strengthen the rhizome of the tree in a pot with pebbles.

Oil burner

This instance is not the easiest, but the most functional, let's try to tell you detailed instructions for the production of useful gizmos from wire.

We bend a circle from a thick wire and solder its ends with a soldering iron. On this base we solder five equal pieces of wire of medium thickness at an equal distance and bend a little in the middle. After we bring the ends to one point and solder to the base of the floor lamp, a circle of thick wire.

From a metal plate we make a bowl and a side indented by zero as much as five tenths of a millimeter. Now for the upper part of the wire of medium thickness we make four squares different sizes, cut four identical pieces from the same wire.

At an angle, solder a short piece of wire to the largest square, a slightly smaller square on it, and so on. We make a circle from the middle wire, attach it to the legs from the same wires to the very last smallest square.

We cover all parts of the lamp with silver spray paint. Then, with a thin copper wire, we go through the entire body of the floor lamp and weave beautiful large beads into the pattern, at the same time connecting the two parts.

Vase

Take not too thick and elastic wire and a deep plate. Attach one end of the wire to the bottom of the container and start wrapping around the plate from the outside. You can do this both randomly and pursuing a special pattern.

After the entire plate is covered with wire on the outside, fasten the other end to the first by twisting them together several times and masking the knot between adjacent lines. Remove the plate and level the resulting vase for fruits and sweets.

Figures and decorations

By twisting a thick wire with round-nose pliers, you can create a mysterious frame for unusual bottles, jugs or vases. Also fascinate jewelry made of copper wire, which, as it were, are held in their paws. gems, wrapping around, like a snake, a hand in the wrist, finger or ear.

Such handmade jewelry is filled with pleasant energy and will always be an exclusive addition to the image.

Trees, animals, mythical creatures, abstract figures can become holders for jewelry and jewelry, keys, business cards, tools and gadgets, and making wire crafts will become a favorite pastime for children and adults, if you do not limit your imagination and use your favorite images.

Photo of wire crafts

The history of this type of needlework, such as weaving jewelry from wire, dates back millennia, because. BC, there was still wire weaving for beginners, which were found during excavations by archaeologists. The production of wire was very complex and time-consuming, so in the past the products were quite expensive.

Nowadays, wire is a material that is relatively easy to make, and its use is widespread. From ordinary, unremarkable wire, they even create wonderful jewelry, accessories, figurines, baskets and decorate household items with it.

This creativity requires perseverance and perseverance, as well as, in addition to the material itself, a lot of tools (pliers, round-nose pliers, a file, a triangular file, a hammer, wire cutters, tweezers, a small vise, a piece of a flat iron sheet and a number of small carnations).

The wire is used thin, no more than 3 mm in diameter, it has the name knitting, it can be made of brass, galvanized steel, aluminum or copper (it is better for beginners to start weaving with it). Often, in addition to weaving, beads, beads or ornamental stones are used for decoration, then the product gets a more complete look.

It is better to take the first steps in wire weaving for beginners with rings, spirals, curls and chains, because. they are the basis of even the most complex products.

Weaving for children

Children also want to join the creativity of adults, and for starters, they can be offered braiding pencils with wire. Weaving will be created with macrame knots.

Another example of a pencil braid looks like this:

Little is required - a rod that will be braided, colored wire in two colors, beads for decoration and scissors.

According to the following simple pattern, you can braid not only a pen or pencil, but also any handle, for example, toys (sword), as well as a thicker wire, which can then be twisted into a circle, so you get a bright bracelet.

It is necessary to tie the first knot according to this scheme, then the rod is inserted and then the entire rod is braided with the same knots to the end.

Braiding pencils is suitable for preschool and toddler kids school age, they can also be offered to twist various simple shapes from colored wire. Simple figures are preferable, because more complex ones can lead to a loss of interest in this needlework.

Older children can learn beadwork and weave more complex beadwork and wire.

In weaving jewelry, beading is used, but wire is used instead of fishing line.

Easy lesson

The bracelet below will be able to be woven by a child as a gift to his mother or girlfriend. Let's analyze a master class on weaving jewelry.

You will need multi-colored beads, a thin wire, suitable in thickness for the holes in the beads, a clasp for a bracelet and a pencil.

First of all, the beads are strung on a wire, which is bent into a ring at the end so that the beads do not fall off. Next, several layers of wire with beads are twisted into one bundle, it is wound around a pencil. This beaded spiral must be carefully removed from the pencil and the bracelet is almost ready, it only remains to fasten the clasp.

Important warning- adults must tell children about safety precautions before starting to work with wire, because sharp wire and tools that can cause injury are used in the work, so it is safer to work with gloves and goggles.

Wire jewelry

If there are unusual knots in a wire product, then for beginners, jewelry weaving patterns will facilitate the process.

The diagrams show the sequence of actions in weaving knots.

1) A bracelet woven with a pigtail of four strands.

2) Necklace made of decorative macrame knot with several weaves.

3) Chain mail bracelet "box".

4) Chain mail bracelet "Birdcage".

5) Chainmail bracelet " dragon scale»

Learning Together

This lesson in photos shows how to consistently create a magnificent pendant to a chain with your own hands. All you need is a wire, 4 beads and tools (pliers, round nose pliers and thin nose pliers). Carnations (pins) for beads are also made from wire with their own hands.

Previously, three beads on carnations are strung on the wire. The first loop of wire is bent, then you need to create a rhombus with such loops, i.e. three more loops are bent at a small distance from each other, and a bead is moved into each loop (2nd, 3rd and 4th - right, lower and left), the weaving of the base at the first loop is completed. Then the wire goes around the first loop and weaving begins inside the rhombus until all the empty space is filled, leaving a little for the last central bead.

beautiful products from the wire are obtained when the work goes without haste, so you should stock up on time and patience.

Video on the topic of the article

Wire weaving is one of the most popular handmade trends today. If you decide to do such weaving, then you need to purchase necessary materials and learn some weaving lessons.

Weaving materials

To weave jewelry, you will need wire, but not ordinary, but handmade, it can be of various diameters and colors. Wire for needlework also comes in different stiffness, so you can weave the most different types products.

Of course, you will not get by with the presence of one wire, to work with it you will need wire cutters, pliers and round nose pliers. These are the main and basic elements, but there are a lot of types of weaving, so you may need other tools.

To make various jewelry, you will need stones, beads, beads and other decorative elements. When weaving wire jewelry, you can add various accessories or make it yourself.

If you have just started making jewelry, then you need to follow safety precautions. You will need to wear gloves to avoid hurting your hands, and since small pieces can fly apart when cutting wire, you will also need glasses.

For learning to wire weave, beginners are advised to use inexpensive wire, as it will be a pity to ruin a silver-plated or gold-plated one.

Wire products

Wire braiding is available for both adults and children. Adults are more interested in weaving various jewelry or decorating the interior, while children can, for example, distinguish themselves at school with a new stationery set or interesting bookmarks. Today, braiding pencils and pens is very fashionable among schoolchildren. The child boasts his exclusive colored wire pen, which no one else has.

Give an extraordinary look to your interior chic bouquets made of beads and wire, such bouquets may not be found in every home, so your guests will be pleasantly surprised by such beauty.

Master class on weaving a vase

If you like to decorate your house with your own hands, then you just need vintage vases, they look very stylish and give extraordinary comfort.

In order to make such vases, you will need a strong, preferably copper wire, dark electrical tape, scissors, wire cutters, hot glue and pieces of fabric.

Now let's move on to the vase itself.

The first thing you should do is the base. Usually it is either round or square, to make it you need to twist the wire into one of these shapes. Next, cut six pieces of wire of the same length, these will be the walls of your vase. At the ends of each of these wires, you need to twist the loops and wrap the edges of the loops with electrical tape.

You need to thread the base of the vase into the already prepared loops and evenly fix the ends of the bottom. The neck of the vase must be made in the same way: thread the base of a smaller diameter into the upper rings and glue it with electrical tape.

To give the vase a shape, you need to make two more circles, large and small (approximately the same diameter as the base and neck) and also fix it on the vase with electrical tape.

The fabric will help you complete the work, you need to cut it into thin strips and wrap it around the entire frame, fixing it with hot glue.

For the final result, put a flower in a chic vase, and it will be a wonderful decor for your room.

Below you can see photos of beautiful vases made from ordinary wire:

Like these ones beautiful jewelry for your home you can do it yourself. You can see what other crafts can be woven from wire in the video below.

Video on the topic of the article

From ordinary, unremarkable wire, you can create wonderful things - jewelry, accessories, photo frames, figurines, baskets, and more. Wire weaving is an ancient art that our ancestors mastered to perfection. During archaeological excavations, scientists often find typesetting belts and women's jewelry made from this material. The same chain mail is nothing more than a product made of forged wire.

Wire weaving is a painstaking work that requires perseverance and perseverance. In addition to these qualities, wire is also needed. From the tools you will need pliers, round nose pliers, needle files, wire cutters, a triangular file, tweezers, a small hammer, several nails of different diameters, a piece of iron with a flat surface. Also a small vise. For weaving, copper, aluminum and knitting wire with a diameter of 0.5 - 3 millimeters are used. In the course is beads, beads, semiprecious stones, Swarovski crystals.

For beginners, it is best to start working with It is flexible, bends easily and at the same time holds its shape well. Before starting work, the wire must be burned. This will sting the varnish covering it, the remnants of the insulation, and make it flexible. Roll it up in a neat, loose roll and place it in the flame. When it is red-hot, lower it into cold water. For complete cleaning, the procedure can be repeated several times.

Having prepared the necessary tools and materials, you can start weaving simple elements from wire - rings, spirals, coils, chains. Even the most complex products are made up of simple elements. Wire weaving, in which beads and beads were used, looks very impressive. To do this, you can master the technique of beading. Just use thin wire instead of fishing line.

The simplest wire weaving technique is Using this technique, the product is made up of many wire rings. They are formed on special round mandrels.

As mandrels, a knitting needle or a nail is suitable. At the nail, you need to cut off the hat and the sharp end. At the end of one of the edges, make a notch to secure the wire. To make single links, lubricate the mandrel with machine oil and clamp it in a vise. Fix the end of the wire in the file and start winding even dense rows of wire onto the mandrel. Cut the finished spring directly on the mandrel with a hacksaw. As a result, you will get a bunch of single links, from which you can begin to assemble the intended product.

In order to get links from two or more turns, the spiral is removed from the mandrel, then every two turns are separated with a knife and bitten off with wire cutters. The ends of the link should be opposite each other. There is another type of links, they look like eights or an infinity sign. In order to get such beautiful twisted links, two identical mandrels must be clamped in a vice. The distance between them should be twice the diameter of the wire. We put one end between the mandrels and tightly wrap one of them, then we stretch the wire between the mandrels and wrap the second one. Wind the figure-eights between the mandrels until you run out of wire. Separate the links with wire cutters.

Chainmail wire weaving is suitable for making bracelets, belts, necklaces.

The copper key will become mysterious and original decoration, which will perfectly complement the image in the style of steampunk or boho, and can also be used as an interior accessory.

In order to make such a key with our own hands, we need:

copper wire: 2 pieces about 40 centimeters long, thick (1.2 mm in diameter) and very thin;
flat small bead, about a centimeter long;
pliers;
small vise or clamp;
anvil (you can take any metal bar, for me it’s a part from a dumbbell);
hammer.

Making a key from copper wire

First we create the top part of our key. We take that wire that is thicker, combine the ends and bend it with a “fish”.

We pull on the ends until the loop shrinks to about 1.5 cm in length.

Now you need to make side loops. Holding the place where the wire crosses, we draw one of the tails of the wire in a circle and tighten the loop to the desired size (about 1 cm in length).

We do the same with the second tail. I just do it with my hands, the copper wire is quite soft. But if it seems hard, you can always help yourself by grabbing the ponytail with pliers.

The procedure must be repeated on both sides again, as a result, five loops should be obtained. We put our workpiece on the anvil and begin to knock with a hammer.

It is not necessary to hit too hard, the main thing is to keep the hammer even so that it does not fall on the edge and does not leave ugly dents on the workpiece. The ends of the loops can be flattened harder, but where the wire crosses, it is important not to overdo it so that it does not break.
This is roughly how it should turn out.

Cunning: you can beat the workpiece only from the side that will then be the wrong side. Then the front will turn out smooth and even.

We clamp the workpiece in a vise so that the ends stick out, and begin to twist them together.

We twist to the place where the beard of the key will be (about 3 cm). Then we bend one of the ends at a right angle, and straighten the other down.

Stepping back about 2.5 cm, grab the lower end with pliers and begin to bend.

We bend to the end and tighten it more tightly with pliers.

Again we clamp the key in a vice, trying to press both the bent end and the twisted part.

Now we grab the end of the resulting loop with pliers and twist, and then bend the remaining tail parallel to the second.

We cut to an equal length and gently give a rounded shape with pliers.

And again we put it on the anvil and knock with a hammer. The very tip of the key and the beard can be flattened more strongly, with the rest we try not to overdo it.

It remains only to attach the bead. Take a thin wire, cut in half. We pass both pieces through the bead and put it in the center of the upper part of the key.

Now you need to wrap each tip of a thin wire around a thick wire 2-3 times. To get rid of protruding tails, we bend the wires at the very base several times, and they break off neatly.
Ready! Can be hung on a string or chain and worn with pleasure.

Pendant heart made of wire and beads

idea of this pendant in the shape of a heart from wire and beads taken from here.

Such heart can become not only bijouterie(pendant, earrings), but also used for decorations postcards, in the design of gifts, for scrapbooking, for a festive home decor for valentine's day. The main thing is to consider how you are going to use your handmade heart and make it the appropriate size.

For the manufacture of handmade heart You will need:

wire thicker as a frame
wire thinner for attaching beads
beads, beads
ribbon(hang heart)
round nose pliers
wire cutters for wire

Making a heart with your own hands

Take a thick wire, create a loop approximately in the middle of it, close the edges together to make heart. Cross the ends of the wire with each other and point up.

Using round nose pliers, create from the free ends of the wire curls inside the heart. At the bottom point, fasten the thick wire frame with a rather long segment (approximately in its middle) of a thin one.

Now we randomly put on the ends of a thin wire beads and beads, fasten them to the frame of thick wire.

Please note that heart that you see in the photo will not hang very straight, because the amount beads attached to its right and left sides is not the same (by number and by weight).

If you do pendant or earrings balance will be important. If you intend decorate with a heart festive table, gift or postcard, then the balance will not play a very big role and you will have a wider field for imagination.

To make this heart pendant just hang it on ribbon.

Similarly (hanging wire heart and beads on tape) You can decorate your home for valentines day. Several of these hearts will look beautiful on a chandelier, window. In addition, such a heart can decorate and candlestick(even from an ordinary glass), and festive table(for example, by adding a ribbon to the heart, you can create a unique napkin ring).

Such heart handmade can be attached to gift(it is better if it is wrapped in plain paper so that the heart is not lost on a multi-colored background).

And you can make a lot of these hearts and use them in all the ways described above, because when using different beads and beads, you can get completely different from each other hearts and hearts! Do you have any ideas? Create, bring joy to yourself and your loved ones with creativity!

With coming Happy Valentine's Day!